1. Home
    2. /
  2. Manuals
    3. /
  3. Siemens
    4. /
  4. Gigaset-SX763
    5. /
  5. 32
Page 156 / 196 Scroll up to view Page 151 - 155
156
Using the USB port
ì
Click
Next
.
The window for finishing the wizard is opened and shows you all the settings you
have made.
ì
Click
Finish
.
Once the wizard for installing the printer port is finished, the
Add Printer Wizard
is
opened.
ì
If you wish to install a printer for this port immediately, click
Next
and follow the
instructions of the Add Printer Wizard.
Page 157 / 196
157
Using the USB port
ì
If you do not wish to install a printer until later, click
Cancel
.
Installing a printer on the TCP/IP port retrospectively
If you connect a printer to this port at a later stage, start the installation procedure for
the printer port as above.
ì
In this case, however, you should click the selection menu in the
Select a Printer
Port
window.
ì
From the list, select the connection you have set up:
e.g.
Gigaset_port (Standard TCP/IP port)
.
ì
Click
Next
and finish installing the printer driver as instructed in the windows that
follow.
Note:
The printer server of the Gigaset SX763 WLAN dsl does not work bi-directionally. It
does not evaluate any of the printer's response messages. For this reason please make
sure that your printer is also only configured uni-directionally. You can configure the
relevant settings for your printer by choosing
Start
–
Settings
–
Printers
.
Page 158 / 196
158
Using the USB port
Instructions for setting up a printer on the PC
Once you have installed the printer port you still cannot start printing. The printer port
is nothing more than an additional interface on your PC, comparable with the USB port.
It means that any printer you install on this port is also regarded as a local printer even
though it is located in the network and possibly not directly near you.
You still need to connect the printer to this port and configure it.
ì
Connect the printer to the USB port on your Gigaset SX763 WLAN dsl.
The printer is installed in the same way as any other printer:
ì
Go through
Start
–
Settings
–
Printers
and click
Add Printer
.
ì
In the window that opens click
Next
.
ì
Proceed as instructed by the Add Printer Wizard. Please note:
In the window in which you are prompted to specify the location of the printer you
should select
Local printer
(usually the default setting).
ì
Then click
Next
.
ì
Continue to install the printer. Select your printer and click
Next
.
ì
When the window in which you are prompted to enter the type of connection
appears, double-click the port name
Gigaset_port
.
ì
Then continue to install the printer and finish the installation.
Note:
The printer server of the Gigaset SX763 WLAN dsl does not work bi-directionally. It
does not evaluate any of the printer's response messages. For this reason please make
sure that your printer is also only configured uni-directionally.
Page 159 / 196
159
Using the USB port
Using the data on a USB mass storage device
To view directories and files which are shared via the Gigaset SX763 WLAN dsl file server
on the USB port within the Windows network, some parameters on your PC must be set
correctly.
For most PCs these settings are already defined correctly on delivery, i.e. you usually do
not have to do anything. The following sections give some diagnosis information in case
problems do occur.
The following description is based on the Windows Vista operating system. The proce-
dure is similar for the other Windows systems. You will find a detailed description of the
network configuration for the different Windows systems on the CD-ROM delivered with
the device.
Checking network services
The following services/protocols must be activated for the network connection used:
u
Internet protocol (TCP/IP)
u
File and Printer Sharing for Microsoft networks
You can check it via the
Properties
of the network connection.
ì
Click on the network symbol in the taskbar
.
ì
Open the
Network and Sharing Center
.
ì
Click
View status
next to the network connection used to connect your PC to the
Gigaset SX763 WLAN dsl.
ì
Click
Properties
.
Page 160 / 196
160
Using the USB port
The check boxes next to the entries
u
Internet Protocol Version 4 (TCP/IPv4)
and
u
File and Printer Sharing for Microsoft Networks
must be marked.
ì
If one of these components is not installed it will have to be installed subsequently.
You may need your Windows installation CD.

Rate

4 / 5 based on 1 vote.

Popular Siemens Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top