Page 146 / 196
Scroll up to view Page 141 - 145
146
Using the USB port
ì
Click
Add a printer
.
ì
In the Add Printer Wizard, click the option
Add a local printer
.
ì
Select the
Create a new port
option button.
ì
Then select
Standard TCP/IP Port
from the selection menu in the field
Type of Port
.
Page 147 / 196
147
Using the USB port
ì
Click
Next
.
ì
Choose
TCPI/IP
as
Device type
.
ì
In the
Host Name or IP Address
input field, enter the IP address of the printer server
This entry is transferred into the
Port Name
field. This name will later appear in the list
of printer ports.
ì
To change the name, click in the
Port Name
field and enter a name. Name this port,
for example,
Gigaset_Port
.
ì
Click
Next
.
Page 148 / 196
148
Using the USB port
As Windows Vista usually first looks for a network card when a printer port is installed,
the
Additional Port Information Required
window is displayed.
ì
Select the
Custom
option and click on
Settings
.
ì
Select the
LPR
option box.
ì
For
Queue name
enter
lp0
(lower case:
l
ima,
p
apa, number 0).
Page 149 / 196
149
Using the USB port
ì
LPR Byte Counting Enabled
should not be selected.
ì
Click on
OK
and then on
Next
.
Windows is searching for the appropriate driver model.
ì
Choose the appropriate driver for your printer and click on
Next
.
After successfully installing the driver you can now define a name for your printer. This
is the name which is used to display the printer in the printer list.
ì
Enter a printer name and select the option
Set as the default printer
.
Page 150 / 196
150
Using the USB port
ì
Click
Next
.
ì
Click the button to print a test page.
ì
Click
Finish
.
Note:
The printer server of the Gigaset SX763 WLAN dsl does not work bi-directionally. It
does not evaluate any of the printer's response messages. For this reason please make
sure that your printer is also only configured uni-directionally. You can configure the
relevant settings for your printer by choosing
Start
–
Settings
–
Printers
.
19216811.live