Page 26 / 312
Scroll up to view Page 21 - 25
If the
modem router
is connected to a DSL service, the DSL LED lights white.
11.
Connect a computer to the
modem router
by one of the following methods:
•
Ethernet cable
. Use an Ethernet cable to connect your computer to a yellow Ethernet LAN port
on the
modem router
.
The product package contains a yellow Ethernet cable.
Your computer connects to the
modem router
’s LAN.
•
WiFi
. Connect to the default WiFi network of the
modem router
:
a.
On your computer or WiFi device, find and select the WiFi network.
The WiFi network name (SSID) is on the product label.
b.
Join the WiFi network and enter the WiFi password.
The password (network key) is on the product label.
Your computer or WiFi device connects to the
modem router
’s WiFi network.
If the computer is set to a static (fixed) IP address (this setting is uncommon), either
change the computer to obtain an IP address automatically from the
modem router
Note
through DHCP, or change the IP address of the computer to a static IP address in
the 192.168.0.2–192.168.0.254 range.
12.
Launch a web browser.
The
modem router
checks the Internet connection.
Install and Access the Modem Router and Its Network
26
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 27 / 312
If the
NETGEAR
genie automatic setup utility displays, skip to Step 14. If it does not display, do the
following:
a.
In the address field of the web browser, enter
www.routerlogin.net
.
b.
When prompted, enter
admin
for the user name and
password
for the password.
If the
NETGEAR
genie automatic setup utility displays, skip to Step 14. If the
NETGEAR
genie automatic
setup utility still does not display, see Step 13.
13.
If the browser cannot display the web page, do the following:
a.
Make sure that the computer is connected to one of the four Ethernet LAN ports or over WiFi to
the
modem router
.
b.
Make sure that the Power LED
of the
modem router
is lit solid white.
c.
Make sure that your browser does not cache the previous page by closing and reopening the
browser.
d.
Clear the browser cache.
e.
If the computer is set to a static (fixed) IP address (this setting is uncommon), either change the
computer to obtain an IP address automatically from the
modem router
through DHCP, or change
the IP address of the computer to a static IP address in the 192.168.0.2–192.168.0.254 range.
14.
Click the
Next
button.
Install and Access the Modem Router and Its Network
27
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 28 / 312
15.
From the
Country
menu, select the country in which you use the
modem router
.
16.
From the
Internet Service Provider
menu, select the Internet service provider (ISP) that you are
using.
If your ISP is not in the menu, select
Other
.
17.
Select the
Yes
radio button.
18.
Click the
Next
button.
When the
modem router
is connected to the Internet, the Congratulations! window displays, and you
successfully completed the setup process. If the Congratulations! window does not display, other
windows might display and you might need to provide more information, in which case you must
continue with the next step. The windows that display depend on your type of ISP connection and
configuration.
Install and Access the Modem Router and Its Network
28
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 29 / 312
19.
(Only if you are using a DSL connection and the following window displays) Specify a full scan to let
the Setup Wizard find the PVC protocol.
A window might display that asks you if you need the Setup Wizard to do a full scan to find the PVC
protocol. If this window does not display, continue with the next step.
Do the following:
a.
Select the
Yes
radio button.
b.
Click the
Next
button.
The Setup Wizard performs a full scan, which might take up to six minutes.
20.
(Only if the following window displays) Specify how to manage problems with the detection of the
Internet connection.
Install and Access the Modem Router and Its Network
29
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 30 / 312
A window might display that states that a problem occurred while the wizard was detecting the Internet
connection. If this window does not display, continue with the next step.
Take one of the following actions:
•
If you did not yet power cycle the modem, do so now:
Unplug your modem’s power, leaving the modem connected to the wall jack for your Internet
service.
a.
b.
If your modem includes a battery backup, remove the battery.
c.
Wait 10 seconds.
d.
If your modem includes a battery backup, reinsert the battery.
e.
Plug in your modem’s power and turn on your modem.
f.
Wait two minutes.
g.
Select the
I just power cycled the modem and waited for 2 minutes
radio button.
h.
Click the
Next
button.
•
See if the DSL cable is not fully inserted or is inserted at the wrong place. If necessary, do the
following:
a.
Fully insert the DSL cable in the correct port on the modem and in the gray DSL port on the
modem router
.
b.
Select the
I corrected a problem with the DSL/Ethernet cable
radio button.
c.
Click the
Next
button.
•
If you do not need to power cycle the modem or the DSL cable is already fully inserted in the correct
ports, do the following:
a.
Select the
None of the above
radio button.
b.
Click the
Next
button.
21.
(Only if the following window displays) Specify how to manage problems with the detection of the IP
address for the Internet connection.
Install and Access the Modem Router and Its Network
30
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
19216811.live