1. Home
    2. /
  2. Manuals
    3. /
  3. NETGEAR
    4. /
  4. D7000
    5. /
  5. 3
Page 11 / 312 Scroll up to view Page 6 - 10
Unpack Your
Modem Router
Your package contains the following items.
Figure 1. Package contents for the modem router
Table 1. Legend
Modem router
1.
Antennas (3)
2.
Power supply (varies by region)
3.
DSL microfilter (varies by region)
4.
Ethernet cable
5.
Phone cable
6.
Your package might contain more items. The filter or phone cable provided depends on the region. In
some regions, a CD is included in the package.
Attach the Antennas
The router comes with three antennas.
To attach the antennas:
1.
Align the antennas with the antenna posts on the back panel of the
modem router
.
Hardware Overview of the Modem Router
11
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 12 / 312
2.
Attach the antennas on the threaded antenna posts.
3.
Position the antennas for the best WiFi performance.
NETGEAR recommends that the center antenna be vertical and that you aim the others outward at
45-degree angles, as shown.
Top Panel with LEDs
The status LEDs and buttons are located on the top panel of the
modem router
.
Figure 2. LEDs and buttons of the modem router
Hardware Overview of the Modem Router
12
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 13 / 312
Table 2. LED and button descriptions
Description
LED
Power
•
Solid amber
. The
modem router
is starting.
If the Power LED lights solid amber during any other time, a power-on self-test
(POST) failure or device malfunction occurred.
For more information, see
Power LED Remains Solid Amber
on page 298.
•
Blinking amber
. The
modem router
was reset to factory default settings and is
restarting.
For more information, see
Use the Reset Button
on page 238.
•
Solid white
. The
modem router
is ready.
•
Off
. Power is not supplied to the
modem router
.
Hardware Overview of the Modem Router
13
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 14 / 312
Description
LED
For more information, see
Power LED Is Off
on page 298.
Internet
•
Solid white
. The
modem router
detected an Internet connection.
•
Solid amber
. The
modem router
is not connected to a DSL, cable, or fiber
modem, or the
modem router
did not detect an Internet connection.
For more information, see
Troubleshoot the Internet Connection
on page 299.
•
Blinking white
. Data is being transmitted over the Internet connection.
•
Alternating white and amber
. The traffic meter is enabled and the traffic limit
is reached.
•
Off
.The
modem router
cannot connect to the Internet or the Internet connection
failed.
For more information, see
Internet LED Is Off
on page 300.
DSL
•
Solid white
. The
modem router
is connected to a DSL service and the DSL
connection is ready.
•
Blinking white
. The
modem router
is negotiating the best possible speed on
the DSL line.
•
Off
.The
modem router
is not connected to a DSL service or a DSL connection
is not established.
2.4 GHz WiFi
•
Solid white
. The 2.4 GHz WiFi radio is operating.
•
Blinking white
. The
modem router
is sending or receiving WiFi traffic over the
2.4 GHz radio.
•
Off
. The 2.4 GHz WiFi radio is off.
5 GHz WiFi
•
Solid white
. The 5 GHz WiFi radio is operating.
•
Blinking white
. The
modem router
is sending or receiving WiFi traffic over the
5 GHz radio.
•
Off
. The 5 GHz WiFi radio is off.
USB 3.0 port 1 and USB
3.0 port 2
•
Solid white
. A USB device is connected and is ready.
•
Blinking white
. Data is being transmitted to or from the USB device.
•
Off
. No USB device is connected, or someone clicked the
Safely Remove
Hardware
button and it is now safe to remove the attached USB device.
The LED color indicates the speed: white for Gigabit Ethernet connections and
amber for 100 Mbps or 10 Mbps Ethernet connections.
Ethernet ports 1–4
Hardware Overview of the Modem Router
14
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Page 15 / 312
Description
LED
•
Solid white or solid amber
. A powered-on device is connected to the Ethernet
port.
•
Blinking white or blinking amber
. Data is being transmitted over the port.
•
Off
. No powered-on device is connected to the Ethernet port.
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on
and off.
WiFi On/Off button with
WiFi LED
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the
modem router
.
For more information, see
Control the WiFi Radios
on page 123 and
WiFi LED Is Off
on page 298.
This button lets you use WPS to join the WiFi network without typing the WiFi
password.The WPS LED blinks white during this process and then lights solid white.
WPS button with WPS
LED
For more information, see
Use WPS to Add a Device to the WiFi Network
on page
114.
You can use the
LED On/Off
switch on the back panel of the
modem router
to turn most LEDs on the top
of the
modem router
on or off (see
Back Panel with Ports, Buttons, Connectors, and Switch
on page 15).
If you turn off the LEDs, the Power LED remains on.
Back Panel with Ports, Buttons, Connectors, and Switch
The back panel of the
modem router
provides ports, buttons, antenna connectors, a DC power connector,
and an LED switch. For information about attaching the antennas, see
Attach the Antennas
on page 11.
Hardware Overview of the Modem Router
15
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Rate

4.5 / 5 based on 2 votes.

Popular NETGEAR Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top