Advanced Settings

81

Zain Mobile Hotspot

4.

Select

Settings > Router > Basic

.

5.

In the LAN section, select the

Enabled

radio button next to IP Passthrough Mode.

6.

Click the

Submit

button.

Enable VPN PassThrough

To connect to a corporate network using VPN, you must first enable VPN connections

(passthrough).



To enable VPN passthrough:

1.

From a computer or wireless device that is connected to your network, launch an

Internet browser.

2.

Enter

http://hotspot.zain

or

.

A login screen displays.

3.

Enter the administrator login password.

The default password is

admin

. The password is case-sensitive.

The Home screen displays.

Advanced Settings

82

Zain Mobile Hotspot

4.

Select

Settings > Router > Basic

.

5.

In the LAN section, select the On radio button next to VPN Passthrough.

The

Submit

button displays after you make a selection.

6.

Click the

Submit

button.

Configure APN Details

Your mobile hotspot comes preconfigured with the access point name (APN) for your network

service provider.

The hotspot checks the APN to determine the type of network connection to establish.



To add an APN for another network:

1.

From a computer or wireless device that is connected to your network, launch an

Internet browser.

2.

Enter

http://hotspot.zain

or

.

A login screen displays.

3.

Enter the administrator login password.

The default password is

admin

. The password is case-sensitive.

The Home screen displays.

Advanced Settings

83

Zain Mobile Hotspot

4.

Select

Settings > Network > APN

.

5.

Click the

Add

button.

6.

Enter the name of the network service provider and the APN that you obtained from it.

7.

Enter the user name and password, if they are required for the wireless network.

8.

Select the network authentication mode:

•

None

•

PAP

•

CHAP

•

PAP or CHAP

9.

Change the PDP (data protocol), if necessary:

•

IPV4

•

IPV6

•

IPV4V6

10.

Change the PDP roaming protocol, if necessary:

•

None

•

IPV4

•

IPV6

•

IPV4V6

Note:

PDP roaming protocol is the IP protocol used while you are roaming

(for example when you are traveling and the roaming network does

not support IPv6).

11.

Click the + symbol next to the new APN entry.

The entry is added to the table.

Advanced Settings

84

Zain Mobile Hotspot



To select the APN to use:

1.

From a computer or wireless device that is connected to your network, launch an

Internet browser.

2.

Enter

http://hotspot.zain

or

.

A login screen displays.

3.

Enter the administrator login password.

The default password is

admin

. The password is case-sensitive.

The Home screen displays.

4.

Select

Settings > Network > APN

.

5.

Select the

Active

radio button next to the APN entry to be used.

The APN is selected.



To remove an APN entry:

1.

From a computer or wireless device that is connected to your network, launch an

Internet browser.

2.

Enter

http://hotspot.zain

or

.

A login screen displays.

3.

Enter the administrator login password.

The default password is

admin

. The password is case-sensitive.

The Home screen displays.

4.

Select

Settings > Network > APN

.

5.

Click the

Details

button beside the APN entry.

6.

Click the

Delete

button.

The APN is removed.

Advanced Settings

85

Zain Mobile Hotspot

Enable DMZ

In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall in

the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer of

protection for the rest of the network, and sending all incoming data to a particular IP

address.



To enable the DMZ and designate a computer to screen incoming traffic:

1.

From a computer or wireless device that is connected to your network, launch an

Internet browser.

2.

Enter

http://hotspot.zain

or

.

A login screen displays.

3.

Enter the administrator login password.

The default password is

admin

. The password is case-sensitive.

The Home screen displays.

4.

Select

Settings > Router > Basic

.

5.

In the DMZ section, select the

On

radio button next to DMZ Enabled.

6.

In the

DMZ Address

field, enter the IP address of the computer to which you want all data

sent.