Page 21 / 216
Scroll up to view Page 16 - 20
21
c
. Windows Vista and Windows 7 obtain an IP address automatically by default. You may not need to configure it
at all.
To check, open the
Networking
Control Panel and select
Internet Protocol Version 4 (TCP/IPv4)
. Click the
Properties
button.
The
Internet Protocol Version 4 (TCP/IPv4) Properties
window should appear as shown.
If not, select the radio buttons shown above, and click the
OK
button.
Page 22 / 216
Administrator’s Handbook
22
Macintosh MacOS 8 or higher or Mac OS X:
Step 1. Access the TCP/IP or Network control panel.
a
. MacOS follows a path like this:
Apple
Menu ->
Control Panels
->
TCP/IP
Control
Panel
b
. Mac OS X follows a path like this:
Apple
Menu ->
System Preferences
->
Network
Then go to Step 2.
Step 2. Select Built-in Ethernet
Step 3. Select Configure Using DHCP
Step 4. Close and Save, if prompted.
Proceed to
“
Accessing the W
eb Management Interface
” on page
23
.
Page 23 / 216
23
Accessing the Web Management Interface
1.
Run your Web browser application, such as Firefox or Microsoft Internet Explorer,
from the computer connected to the Motorola
®
Gateway.
2.
Enter
in the Location text box.
While the Gateway is determining the Broadband network type, the following screen appears.
The Device Status Page appears.
Page 24 / 216
Administrator’s Handbook
24
3.
Check to make sure the Broadband and Service LEDs are lit
GREEN
to verify that
the connection to the Internet is active.
Congratulations! Your installation is complete.
You can now surf to your favorite Web sites by typing an URL in your browser’s location box or by selecting one of
your favorite Internet bookmarks.
Page 25 / 216
25
Broadband Network Redirect Pages
After a few minutes if the Broadband network cannot be determined, the following screen appears. Contact AT&T
Customer care at the number shown for assistance.
If you click the
Continue
button, the following screen appears. Here you can manually select the Broadband net-
work type, if you know it.
19216811.live