Motorola NVG589 Router Manual PDF (Setup & Configuration Guide)

Page 146 / 216 Scroll up to view Page 141 - 145

Administrator’s Handbook

146

set link name

name

pppoe ac-name

name

Specifies this particular Access Concentrator unit from all others.. Some access provider networks may have mul-

tiple PPPoE servers, and having the Motorola Gateway indicate an AC Name specifies to which one the Motorola

Gateway is trying to connect.

Management commands

All management related items are grouped in this section.

set management account administrator username

username

Specifies the

username

for the administrative user – the default is

admin

.

set management account user username

username

Specifies the

username

for the non-administrative user – the default is

user

.

set management cwmp enable [ off | on ]

Turns

cwmp

(TR-069 CPE WAN Management Protocol)

on

or

off

. TR-069 allows a remote Auto-Config Server

(ACS) to provision and manage the Motorola Gateway. TR-069 protects sensitive data on the Gateway by not

advertising its presence, and by password protection.

set management cwmp acs-url

acs_url:port_number

set management cwmp acs-username

acs_username

set management cwmp acs-password

acs_password

If TR-069 WAN side management services are enabled, specifies the auto-config server URL and port number. A

username and password must also be supplied, if TR-069 is enabled.

The auto-config server is specified by URL and port number. The format for the ACS URL is as follows:

http://

some_url.com

:

port_number

or

http://

123.45.678.910

:

port_number

On units that support SSL, the format for the ACS URL can also be:

https://

some_url.com

:

port_number

or

https://

123.45.678.910

:

port_number

TR-064

DSL Forum LAN Side CPE Configuration (TR-064) is an extension of UPnP. It defines more services to locally

manage the Motorola

®

Device. While UPnP allows open access to configure the Device's features, TR-064

requires a password to execute any command that changes the Device's configuration.

set management lanmgmt enable [ off | on ]

Turns TR-064 LAN side management services on or off. The default is

off

.

Page 147 / 216

147

set management shell idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for telnet access to the Gateway, after which a user must re-login to the

Gateway. Default is

15

minutes for telnet.

set management shell ssh-port [ 1 - 65534 ]

Specifies the port number for secure shell (SSH) communication with the Motorola Gateway. Defaults to port

0

(off).

set management shell telnet-port [ 1 - 65534 ]

Specifies the port number for telnet (CLI) communication with the Motorola Gateway. Because port numbers in

the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when assigning

new port numbers to the Motorola Gateway telnet configuration interface. A setting of

0

(zero) will turn the server

off.

set management upnp enable [ off | on ]

Turns Universal Plug-and-Play (UPnP) on or off.

set management web http-port [ 1 - 65534 ]

Specifies the port number for HTTP (web) communication with the Motorola Gateway. Because port numbers in

the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when assigning

new port numbers to the Motorola Gateway web configuration interface. A setting of

0

(zero) will turn the server

off.

set management web https-port [ 1 - 65534 ]

Sets the secure web access port for secure management of the Motorola Gateway. Default is port

443

.

set management web https-cert-cn

string

Specifies a certificate from a trusted certificate authority to identify the secure web access.

set management web idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for HTTP access to the Gateway, after which a user must re-login to the

Gateway. Default is

5

minutes for HTTP.

☛

NOTE:

You cannot specify a port setting of

0

(zero) for both the web and telnet ports at the same time. This

would prevent you from accessing the Gateway.

set management web isp-help-desk

phone_number_string

Specifies the ISP Help Desk phone number as it appears in the web UI. For AT&T, the default is: 1-800-288-2020.

Page 148 / 216

Administrator’s Handbook

148

Remote access commands

set management remote-access http-port [ 1 - 65534 ]

Sets the web access port for remote access management of the Gateway. Default is port

51003

.

set management remote-access http-idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for remote HTTP access to the Gateway, after which a user must re-login to

the Gateway. Default is

20

minutes for HTTP.

set management remote-access http-total-timeout [ 1...120 ]

Specifies a total timeout period of inactivity for remote HTTP access to the Gateway, after which a user must re-

login to the Gateway. Default is

20

minutes for HTTP.

set management remote-access http-max-clients

number

Specifies the maximum number of client sessions for remote web access management. Defaults to 1 (one).

set management remote-access https-port [ 1 - 65534 ]

Sets the secure web access port for remote access management of the Gateway. Default is port

51443

.

set management remote-access https-idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for secure remote HTTPS access to the Gateway, after which a user must

re-login to the Gateway. Default is

20

minutes for HTTPS.

set management remote-access https-total-timeout [ 1...120 ]

Specifies a total timeout period of inactivity for secure remote HTTPS access to the Gateway, after which a user

must re-login to the Gateway. Default is

20

minutes for HTTPS.

set management remote-access https-max-clients

number

Specifies the maximum number of client sessions for secure remote web access management. Defaults to 1

(one).

set management remote-access telnet-port [ 1 - 65534 ]

Specifies the port number for remote access telnet (CLI) communication with the Motorola Gateway. Because port

numbers in the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when

assigning new port numbers to the Motorola Gateway telnet configuration interface. A setting of

0

(zero) will turn

the server off. Defaults to port

0

.

set management remote-access telnet-idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for remote telnet access to the Gateway, after which a user must re-login to

the Gateway. Default is

5

minutes for telnet.

set management remote-access telnet-total-timeout [ 1...120 ]

Specifies a total timeout period of inactivity for remote telnet access to the Gateway, after which a user must re-

login to the Gateway. Default is

20

minutes for telnet.

Page 149 / 216

149

set management remote-access telnet-max-clients

number

Specifies the maximum number of client sessions for remote telnet access management. Defaults to

4

.

set management remote-access ssh-port [ 1 - 65534 ]

Specifies the port number for secure shell (SSH) communication with the Motorola Gateway. Defaults to port

22

.

set management remote-access ssh-idle-timeout [ 1...120 ]

Specifies a timeout period of inactivity for remote secure shell (SSH) access to the Gateway, after which a user

must re-login to the Gateway. Default is

5

minutes for SSH.

set management remote-access ssh-total-timeout [ 1...120 ]

Specifies a total timeout period of inactivity for remote secure shell (SSH) access to the Gateway, after which a

user must re-login to the Gateway. Default is

20

minutes for SSH.

set management remote-access ssh-max-clients

number

Specifies the maximum number of client sessions for remote secure shell (SSH) access management. Defaults to

4

.

set management lan-redirect enable [ off | on ]

If set to

on

, if a WAN failure condition is detected, the LAN client's browser is redirected to a web page of failure

and help text information. The redirect will only occur once, as the web UI maintains a state variable to determine

whether the redirect has occurred; to continually redirect would block the user from reconfiguring the router.

set management lan-redirect missing-filter-notify [ on | off ]

If set to

on

, if a missing filter on the line is detected, the LAN client's browser is redirected to a web page of failure

and help text information. The redirect will only occur once, as the web UI maintains a state variable to determine

whether the redirect has occurred; to continually redirect would block the user from reconfiguring the router.

set management lan-access wan-cpe-mgmt-block [ off | web | all ]

Blocks management of the device from the LAN via the web or all interface(s).

TR-064

DSL Forum LAN Side CPE Configuration (TR-064) is an extension of UPnP. It defines more services to locally

manage the Motorola

®

Gateway. While UPnP allows open access to configure the Gateway's features, TR-064

requires a password to execute any command that changes the Gateway's configuration.

set management lanmgmt enable [ off | on ]

Turns TR-064 LAN side management services on or off. The default is

off

.

Page 150 / 216

Administrator’s Handbook

150

Physical interfaces commands

DSL interfaces

set physical dsl enable [ off | on ]

Turns the physical DSL interface

off

or

on

. Default is

on

.

set physical dsl dsl-mode [ auto | single | bonded ]

Sets the mode for the DSL connection, whether a

single

line or

bonded

. If the default

auto

is set, the device will

try both single and bonded, attempting to detect and lock on the mode in use.

set physical dsl loopback [ off | on ]

Turns the DSL loopback mode

off

or

on

. Default is

off

.

set physical dsl annexm [ off | on ]

Turns optional DSL Annex M

off

or

on

. Default is

off

. If enabled, data rates can be as high as 12 or 24 Mbit/s

downstream and 3 Mbit/s upstream depending on the distance from the DSLAM to the customer's premises.

set physical dsl modulation auto [ off | on ]

Turns automatic DSL modulation

off

or

on

. Default is

off

.

set physical dsl modulation vdsl2 [ off | on ]

Turns vdsl2 DSL modulation

off

or

on

. Default is

on

.

set physical dsl modulation adsl2 [ off | on ]

Turns adsl2 DSL modulation

off

or

on

. Default is

on

.

set physical dsl modulation adsl2+ [ off | on ]

Turns adsl2+ DSL modulation

off

or

on

. Default is

on

.

set physical dsl modulation annex-l [ off | on ]

Turns annex-l DSL modulation

off

or

on

. Default is

off

.

set physical dsl modulation annex-m [ off | on ]

Turns annex-m DSL modulation

off

or

on

. Default is

off

.

set physical dsl profile-8a [ on | off ]

Enables or disables VDSL2 profile 8a governing upstream and downstream bandwidth. Default is

on

.

set physical dsl profile-8b [ on | off ]

Enables or disables VDSL2 profile 8b governing upstream and downstream bandwidth. Default is

on

.

Rate

Popular Motorola Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share