Page 301 / 351 Scroll up to view Page 296 - 300
301
CONFIG Commands
On units that support SSL, the format for the ACS URL can also be:
https://
some_url.com
:
port_number
or
https://
123.45.678.910
:
port_number
Page 302 / 351
302
VDSL Settings
CAUTION!
These settings are for very advanced users and lab technicians. Exercise
extreme caution when modifying any of these settings.
set vdsl sys-option [ 0x00 - 0xff ]
sys-bandplan [ 0x00 - 0xff ]
psd-mask-level [ 0x00 - 0xff ]
pbo-k1_1 [ 0x00000000 - 0xffffffff ]
pbo-k1_2 [ 0x00000000 - 0xffffffff ]
pbo-k1_3 [ 0x00000000 - 0xffffffff ]
pbo-k2_1 [ 0x00000000 - 0xffffffff ]
pbo-k2_2 [ 0x00000000 - 0xffffffff ]
pbo-k2_3 [ 0x00000000 - 0xffffffff ]
line-type [ 0x00 - 0xff ]
us-max-inter-delay [ 0x00 - 0xff ]
ds-max-inter-delay [ 0x00 - 0xff ]
us-target-noise-margin [ 0x0000 - 0xffff ]
ds-target-noise-margin [ 0x0000 - 0xffff ]
min-noise-margin [ 0x0000 - 0xffff ]
port-bandplan [ 0x00 - xff ]
framing-mode [ 0x00 - 0xff ]
band-mod [ 0x00 - 0xff ]
port-option [ 0x00 - 0xff ]
power-mode [ 0x00 - 0xff ]
tx-filter [ 0x00 - 0xff ]
rx-filter [ 0x00 - 0xff ]
dying-gasp [ off | on ]
Page 303 / 351
303
CONFIG Commands
VDSL Parameter Defaults
Parameter
Default
Meaning
sys-option
0x00
VDSL system option(bit0=ntr, 1=margin, 2=ini,
3=pbo, 4=tlan, 5=pbo)
sys-bandplan
0x02
VDSL system bandplan(bp_3_998_4=2,
bp4_997_3=3, bp5_997_3=4…)
psd-mask-level
0x00
VDSL system psd mask(def=0, 1=ansim1cab,
2=ansim2cab, 3=etsim1cab, 4=etsim2cab)
pbo-k1_1
0x00
VDSL system power back-off k1_1
pbo-k1_2
0x00
VDSL system power back-off k1_2
pbo-k1_3
0x00
VDSL system power back-off k1_3
pbo-k2_1
0x00
VDSL system power back-off k2_1
pbo-k2_2
0x00
VDSL system power back-off k2_2
pbo-k2_3
0x00
VDSL system power back-off k2_3
line-type
0x81
VDSL port line type(auto=0x80, vdsl=0x81,
vdsl_etsi=0x82)
us-max-inter-delay
0x04
VDSL port upstream max inter delay
ds-max-inter-delay
0x04
VDSL port downstream max inter delay
us-target-noise-margin
0x0C
VDSL port upstream target noise margin
ds-target-noise-margin
0x0C
VDSL port downstream target noise margin
min-noise-margin
0x0A
VDSL port minimum noise margin
port-bandplan
0x02
VDSL port bandplan
framing-mode
0x90
DSL port frame mode(0-ATM; 0x80-PTM;
0x90-Auto(EFM/PTM)
band-mod
0x11
VDSL port band mod
port-option
0x0A
- Annex B
0x06
- Annex A
VDSL port portoption(bit0=I43, bit1=v43,
bit2=a43, bit3=b43)
power-mode
0x01
VDSL port power mode
tx-filter
0x02
VDSL port txPathFilterMode
rx-filter
0x02
VDSL port rxPathFilterMode
dying-gasp
off
Dying Gasp On/Off
Page 304 / 351
304
VDSL Parameters Accepted Values
Parameter
Accepted Values
sys-option
Bit[0]: NTR_DISABLE
Bit[1]: ALW_MARGIN_ADJUST.
1: the SNR margin for the optional band is reduced by up to 2.5
dB, but never below a minimum of 4 dB.
Bit[2]: SUPPORT_INI
Bit[4]: TLAN Enable
Bit[5]: PBO Weak mode Enable (Applicable only when PBO
Bit[3]=0.
Bit[6]: ADSL_SAFE_MODE Enable
Bit[7]: TLAN_SAFE_MODE Enable (Applicable only when TLAN
Enable Bit[4] is set. If TLAN_SAFE_MODE not set, line will
attempt to retrain at higher rates, but less stable line)
Page 305 / 351
305
CONFIG Commands
sys-bandplan
BP1_998_3
(0x00)
BP2_998_3
(0x01)
BP998_3B_8_5M
(0x01)
BP3_998_4
(0x02)
BP998_4B_12M
(0x02)
BP4_997_3
(0x03)
BP997_3B_7_1M
(0x03)
BP5_997_3
(0x04)
BP6_997_4
(0x05)
BP997_4B_7_1M
(0x05)
BP7_MXU_3
(0x06)
FLEX_3B_8_5M
(0x06)
BP8_MXU_2
(0x07)
BP9_998_2
(0x08)
BP10_998_2
(0x09)
BP998_2B_3_8M
(0x09)
BP11_998_2
(0x0A)
BP12_998_2
(0x0B)
BP13_MXU_3
(0x0C)
BP14_MXU_3
(0x0D)
BP15_MXU_3
(0x0E)
BP16_997_4B_4P
(0x0F)
BP17_998_138_4400
(0x10)
BP18_997_138_4400(0x11)
BP19_997_32_4400(0x12)
BP20_998_138_4400_opBand (0x15)
BP21_997_138_4400_opBand (0x16)
BP22_998_138_4400_opBand(0x16)
BP23_998_138_16000
(0x17)
BP24_998_3B_8KHZ
(0x18)
BP25_998_138_17600
(0x19)
BP26_CH1_3
(0x1A)
BP27_CH1_4
(0x1B)
VDSL Parameters Accepted Values
Parameter
Accepted Values

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top