Motorola CPEi-35775 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Motorola

CPEi-35775

Page 26 / 58 Scroll up to view Page 21 - 25

68P09301A65-A

3-13

FEB 2009

Basic Configuration

Wi-Fi

The Wi-Fi basic menu helps manage the Wi-Fi related configurations. This menu

includes Basic, and Security menus. For the Advanced settings, refer to the Advanced

Configuration chapter “Wi-Fi Advanced” on page 7.

Figure 3-5:

Wi-Fi Basic Menu

Wi-Fi Menu

Wi-Fi Basic (Wireless LAN) network settings are configured at this menu which

includes:

Table 3-14

Wi-Fi Basic

Field or Button

Description

Enable Wi-Fi Wireless Service

Enable Wi-Fi service of the device by clicking the box

to place a check mark. This function is disabled by

clicking the box to remove the check mark.

Wi-Fi Network SSID

Network Service Set Identifier (SSID) is a label/name

that distinguishes one wireless LAN (Wi-Fi network)

from another. The field is case-sensitive and must not

exceed 32 characters. For added security, changing

the default SSID (Wi-Fi) to a unique name is

recommended.

Page 27 / 58

3-14

68P09301A65-A

FEB 2009

Basic Configuration

Wi-Fi Security

The Wi-Fi Security menu enables you to choose the wireless LAN security protocol to

enable authentication and secure data transmission on the Wi-Fi network.

Operating Mode

A pull-down list with the choices of:

• 802.11b only (default)

• 802.11g only

• 802.11b/g

Select 802.11 b/g to set the device to operate the Wi-

Fi network with both 802.11b and 802.11g wireless

devices.

Operating Channels

A pull-down list with choices from one to fourteen (1

through 14) depending upon the country/region

setting. The default range is one to eleven (1 through

11). The default channel is six (6).

The Wi-FI operating mode channel settings can be

modified if there are problems with nearby wireless

devices.

The operating channel selection is as follows:

• 1 - 11: United States, Canada, and other

• 1 - 13: Europe, Australia, Venezuela

• 1 - 14: Japan (channels 1 - 14 if selecting 802.11b,

channels 1 - 13 if 802.11b/g or 802.11g is

selected)

• 3 - 9: Israel

Table 3-14

Wi-Fi Basic

Field or Button

Description

• Make sure the selected network security protocol is supported by the wireless

devices

on the network

• Wi-Fi security is disabled by default. Use this Wi-Fi Security menu to manually

enable Wi-Fi security.

NOTE

Page 28 / 58

68P09301A65-A

3-15

FEB 2009

Basic Configuration

WEP Configuration

WPA/WPA2 Configuration

Manage WPA/WPA2 security protocol settings. Underneath WPA/WPA2 Configuration.

Table 3-15

WEP Configuration

Field or Button

Description

Authentication Type

A pull-down list with choices of:

• Automatic

• Shared

• Open

The default is Automatic. Two methods of authentication can

be used with WEP: Open System authentication and Shared

Key authentication. Choose Automatic to allow the device to

automatically switch to the WEP authentication type used by

the wireless device entering the network.

Encryption Strength

A pull-down list with choices of 64-bits Key and 128-bits Key.

The default is 64-bits Key. Data transmission on the Wireless

LAN is encrypted when WEP is enabled. Data encryption key

is either 64bits or 128 bits.

Passphrase

Choices for the passphrase are:

•

Key Index - pull down menu lets you choose the type of key

generation.

•

Automatic Key Generation - this feature generates 4 keys

where one can be chosen to for use as the network

security passphrase. Click the

Generate Key

button.

•

Manual Key Generation - this feature allows you to

manually enter an encryption key of your choice.

If a 64-bit encryption key is used, enter 10 hexadecimal digits

(any combination of 0-9, a-f, or A-F). 128-bit WEP encryption

key, enter 26 hexadecimal digits (any combination of 0-9, a-f,

A-F).

Table 3-16

WPA/WPA2 Menu Selections

Field or Button

Description

Group Key Renewal

This setting determines how often the group key is going to

change. The group key renewal interval range is 300 to 7200.

Default setting is 3600 seconds.

Authentication Type

Authentication keys can be generated either automatically or

entered manually. The types of authentication selections are:

• Remote (Radius) - Radius Server IP address where the

field is broken into 4 sub-fields with each limited to 3 digits

and the default is empty.

• Shared (local) - a preshared key that includes the PSK

passphrase where the default is an empty field.

Page 29 / 58

3-16

68P09301A65-A

FEB 2009

Basic Configuration

Page 30 / 58

68P09301A65-A

4-1

FEB 2009

Advanced Configuration

Chapter 4: Advanced Configuration

The Advanced Configuration section describes the Port Forwarding, Local Address,

and Control Panel menus.

Port Forwarding Menu

Port forwarding enables you to direct incoming traffic to specific LAN hosts

(computers on your network) based on the protocol and port number. It is used to play

Internet games or provide local services (such as web hosting) for a LAN group. The

Port Forwarding menu provides the following tabs:

•

Basic

•

Forwarding

Figure 4-1:

Port Forwarding

Be sure to click the

Apply

button once you have made changes.

Table 4-1

Port Forwarding Menu

Field or Button

Description

Enable UPnP IGD

Enables the Universal Plug and Play

(UPnP) Internet Gateway Device (IGD)

profile to allow certain Windows

applications to set up the port forwarding

rule dynamically when NAT is enabled on

this device.

DMZ (DeMilitarized Zone) IP Address

Enter the DMZ IP Address.

Rate

Popular Motorola Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share