1. Home
    2. /
  2. Manuals
    3. /
  3. Motorola
    4. /
  4. CPEi-35775
    5. /
  5. 2
Page 6 / 58 Scroll up to view Page 1 - 5
68P09301A65-A
1-3
FEB 2009
Desktop CPEi 775 User Guide
1
Back of the CPE
The back of the CPE unit contains the reset switch, AC Power Connector, Ethernet
connector, Ethernet LED, Line 1 and Line 2 telephone ports.
Figure 1-2:
CPE Ports and Connections
Operating Information
Operating temperature for this unit is 0-40
°
C (32-104
°
F).
Table 1-2
Port Descriptions
Port
Port Description
Ethernet
Ethernet Port
Power
AC Power Connector
Reset
Hardware Reset Button (A paperclip is
recommended for accessing this button).
Phone Line 1
RJ-11 port for use with VoIP.
Phone Line 2
RJ-11 port for use with VoIP.
Page 7 / 58
1-4
68P09301A65-A
FEB 2009
1
Desktop CPEi 775 User Guide
Page 8 / 58
68P09301A65-A
2-1
FEB 2009
Installation
2
Chapter 2: Installation
Overview
To install the Desktop CPEi 775 Series, review the following sections:
•
Before You Begin
•
Easy Setup
Before you Begin
Before you begin installation, check that you have received the following items with
your Desktop CPEi 775:
In addition, you need:
•
A computer
•
An RJ-11 telephone cable (optional). Two RJ-11 telephone cables are required if
your service provider has supplied you with two telephone numbers.
Easy Setup
The CPE is easily set up in your home. Basic installation equipment needed are the
power adapter and cord, Ethernet cable, a PC or laptop computer and the CPE device.
If you want to use the VoIP functionality, you need an RJ-11 phone cable and a
telephone.
Perform the following tasks before attaching the power cord or powering up the unit:
•
Stand the CPE on a flat surface.
•
Plug the AC power adapter cord into an AC outlet.
•
Plug one end of the Ethernet cable into the Ethernet connector on the back of the
unit.
•
Plug the other end of the Ethernet cable into the Ethernet connector of your
computer.
•
To use VoIP functionality of the phone, plug one end of the phone line into the
activated phone connector on the back of the unit. Phone line activation is
dependent upon your service contract.
•
Plug the other end of the phone line into the phone line connector of your
telephone.
Table 2-1
In the box with your CPE, you should have
Item
Description
AC Power Adapter
Power adapter cord connects the Desktop
CPE to an AC electrical outlet.
Ethernet Cable
The Ethernet cable connects the Internet
port on your Desktop CPE to your PC or
laptop computer.
Desktop CPEi 775 Quick Start Guide
Desktop CPEi 775 Quick Start Guide
Page 9 / 58
2-2
68P09301A65-A
FEB 2009
2
Installation
Advanced Setup
The CPE can also be used to connect to a multi-port switch (hub) - purchased
separately from the CPE. Connecting the CPE device to a hub allows you to connect
more than one computer to your CPE device.
Procedure to Log into the CPE
Before you Begin Configuration
Some settings on your computer need to be verified or changed to ensure that your
computer configuration can support the Desktop CPE.
Verify that the IP addresses and DNS settings are automatically generated in your
Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the
chapter titled “Configuring TCP/IP” for additional information.
Logging in to the CPE
Use the following procedure to log into the Desktop CPE:
1.
On a computer that is connected to the Desktop CPE, open a web browser.
2.
In the Address or Location field, type
http://mywimax.
and press
ENTER
to
display the login screen.
Include the period (.) after http://mywimax. in order to access the login screen.
3.
The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a
password.
Enter the IP address: http://192.168.15.1 into Address field in order to gain
access to your CPE. If you cannot access the CPE, refer to the chapter
titled: Configuring TCP/IP for more information.
NOTE
Page 10 / 58
68P09301A65-A
2-3
FEB 2009
Installation
2
Figure 2-1:
Login Screen
4.
In the
Password
field, type the password (default is
motorola
).
5.
Click
Login.
6.
First time users see a pop-up box that states: “The Wizard application will guide
you through for the first time configuration”. Click
OK
button to continue.
7.
Click the
OK
button to launch the wizard application.
Setup Wizard and Authentication
Step 1 - Change Password
Once you have launched the setup wizard, you are prompted to change your password.
Motorola recommends using a password to protect your home network and CPE
device. Passwords are case sensitive.
To change your password:
•
Ensure the “Enable Login Password Protection” box is checked.
•
Enter a New Login Password in the box. Passwords can be no more than 20
characters in length.
•
Re-type your new password in the Confirm New Login Password box.
•
Click
Next.
If you forget your password, you can reset it back to the default (motorola) password.
To reset the password, press and hold the reset button on the back of your CPE for 5 or
more seconds. Before resetting the CPE, ensure that the power is ON.
Step 2 - Device Time
This screen allows you to set the time zone and to enable Daylight Savings Time (when
applicable) for your location.
•
Select the appropriate time zone for your location from the drop-down box.

Rate

4 / 5 based on 3 votes.

Popular Motorola Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top