1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. SPA-9000
    5. /
  5. 8
Page 36 / 127 Scroll up to view Page 31 - 35
29
Chapter 6: Using the Web-based Utility
The Router Tab
IP Telephony System
The Router - Application Screen
This screen lets you configure port forwarding, DMZ, and reserved ports range settings.
Port Forwarding Settings
Enable
. Select
yes
or
no
for each port forwarding entry, which defines a port range to be forwarded to a server.
The default is
no
.
Service Name
. Enter the name of the service or application.
Starting Port
. Enter the starting port number of the forwarded port range.
Ending Port
. Enter the ending port number of the forwarded port range.
Protocol
. Select the protocol used,
TCP
,
UDP
, or
Both
. The default is
TCP
.
Server IP Address
. Enter the IP address of the server, 192.168.0.x (x being a different number for each server
you specify).
DMZ Settings
Enable DMZ
. DMZ hosting forwards all ports at the same time to one computer. This allows one local user to be
exposed to the Internet for use of special-purpose services such as videoconferencing. Select
yes
or
no
from the
drop-down menu. The default is
no
.
DMZ Host IP Address
. Enter the IP address of the DMZ host, 192.168.0.x (x being the number for the computer
you want to specify). Use the Static DHCP Lease Settings section on the
LAN Setup
screen, so the DMZ Host
keeps this IP address; otherwise, its IP address may change.
System Reserved Ports Range
Starting Port
. This port range defines the random TCP/UDP ports used by the application running on the System.
They cannot be used by port forwarding or DMZ. Enter the starting port number of the reserved ports range. The
default is
50000
.
Num of Ports Reserved
. Select the number of ports you want to reserve:
256
,
512
, or
1024
. The default is
256
.
When you have finished making changes, click the
Submit All Changes
button to save the changes, or click the
Undo All Changes
button to undo your changes.
Figure 6-7: Router - Application Screen
tcp
: a network protocol for transmitting data that
requires acknowledgement from the recipient of
data sent.
udp
: a network protocol for transmitting data
that does not require acknowledgement from
the recipient of the data that is sent.
Page 37 / 127
30
Chapter 6: Using the Web-based Utility
The Voice Tab
IP Telephony System
The Voice Tab
The Voice - Info Screen
This screen shows voice-related settings for the System.
Product Information
Product Name
. Shown here is the model number of the System.
Serial Number
. Shown here is the serial number of the System.
Software Version
. Shown here is the version number of the System software.
Hardware Version
. Shown here is the version number of the System hardware.
MAC Address
. Shown here is the MAC address of the System.
Client Certificate
. Shown here is the status of the client certificate, which indicates that the System has been
authorized by your ITSP.
Licenses
. This indicates how many additional licenses you have acquired for the System.
System Status
Current Time
. Displayed here is the current date and time of the System.
Elapsed Time
. Displayed here is the amount of time elapsed since the last reboot of the System.
FXS 1/2 Status
The FXS 1 and FXS 2 ports are the Phone ports of the System. (You can connect analog phones or fax machines to
both ports.) They have the same status information available.
Hook State
. Displayed here is the status of the phone’s readiness.
On
indicates that the phone is ready for use,
while
Off
indicates that the phone is in use.
Message Waiting
. This indicates whether you have new voicemail waiting.
Call Back Active
. This indicates whether a call back request is in progress.
Last Called Number
. Displayed here is the last number called.
Figure 6-8: Voice - Info Screen - Product Information
Figure 6-9: Voice - Info Screen - System Status
Page 38 / 127
31
Chapter 6: Using the Web-based Utility
The Voice Tab
IP Telephony System
Last Caller Number
. Displayed here is the number of the last caller.
Calls 1 and 2 have the same status information available.
Call 1/2 State
. Displayed here is the status of the call.
Call 1/2 Tone
. Displayed here is the type of tone used by the call.
Call 1/2 Encoder
. Displayed here is the codec used for encoding.
Call 1/2 Decoder
. Displayed here is the codec used for decoding.
Call 1/2 FAX
. Displayed here is the status of the fax pass-through mode.
Call 1/2 Type
. Displayed here is the direction of the call.
Call 1/2 Remote Hold
. This indicates whether the far end has placed the call on hold.
Call 1/2 Callback
. This indicates whether the call was triggered by a call back request.
Call 1/2 Peer Name
. Displayed here is the name of the internal phone.
Call 1/2 Peer Phone
. Displayed here is the phone number of the internal phone.
Call 1/2 Duration
. Displayed here is the duration of the call.
Call 1/2 Packets Sent
. Displayed here is the number of packets sent.
Call 1/2 Packets Recv
. Displayed here is the number of packets received.
Call 1/2 Bytes Sent
. Displayed here is the number of bytes sent.
Call 1/2 Bytes Recv
. Displayed here is the number of bytes received.
Call 1/2 Decode Latency
. Displayed here is the number of milliseconds for decoder latency.
Call 1/2 Jitter
. Displayed here is the number of milliseconds for receiver jitter.
Call 1/2 Round Trip Delay
. Displayed here is the number of milliseconds for delay.
Call 1/2 Packets Lost
. Displayed here is the number of packets lost.
Call 1/2 Packet Error
. Displayed here is the number of invalid packets received.
Figure 6-10: Voice - Info Screen - FXS Status
Page 39 / 127
32
Chapter 6: Using the Web-based Utility
The Voice Tab
IP Telephony System
Line 1/2/3/4 Status
Lines 1, 2, 3, and 4 have the same status information available.
Registration State
. Shown here is the status of the line’s registration with the ITSP.
Last Registration At
. Shown here are the last date and time the line was registered.
Next Registration In
. Shown here is the number of seconds until the next registration.
Message Waiting
. This indicates whether you have new voicemail waiting.
Mapped SIP Port
. Shown here is the port number of the mapped SIP port.
Auto Attendant Prompt Status
Prompt 1-4
. The first four greetings or messages are defaults. If you change a default, then the screen will show
the new prompt’s duration in milliseconds.
Prompt 5-10
. For each prompt, the screen shows its duration in milliseconds.
Space Remaining
. Shown here is the number of milliseconds available.
Current AA
. Shown here is the auto-attendant in use.
When you have finished making changes, click the
Submit All Changes
button to save the changes, or click the
Undo All Changes
button to undo your changes.
Figure 6-11: Voice - Info Screen - Line Status
Figure 6-12: Voice - Info Screen - Auto Attendant Prompt
Status
Page 40 / 127
33
Chapter 6: Using the Web-based Utility
The Voice Tab
IP Telephony System
The Voice - System Screen
This screen lets you configure system settings.
System Configuration
Restricted Access Domains
. Enter the domain names permitted to access the System.
Enable Web Admin Access
. This setting lets you enable or disable local access to the Web-based Utility. Select
yes
or
no
from the drop-down menu. The default is
yes
.
Admin Passwd
. Enter the password for the administrator. (By default, there is no password.)
User Password
. Enter the password for the user. (By default, there is no password.)
Miscellaneous Settings
Syslog Server
. Enter the IP address of the syslog server, which logs system information and critical events of the
System.
Debug Server
. Enter the IP address of the debug server, which logs debug information of the System.
Debug Level
. This determines the level of debug information that will be generated. Select
0
,
1
,
2
, or
3
from the
drop-down menu. The higher the debug level, the more debug information will be generated. The default is
0
,
which indicates that no debug information will be generated.
When you have finished making changes, click the
Submit All Changes
button to save the changes, or click the
Undo All Changes
button to undo your changes.
Figure 6-13: Voice - System Screen
IMPORTANT:
In most cases, you should not change these settings unless instructed to do by
your ITSP.

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top