1. Home
    2. /
  2. Manuals
    3. /
  3. Inteno
    4. /
  4. X5671B
    5. /
  5. 16
Page 76 / 82 Scroll up to view Page 71 - 75
X5671
User’s Guide
71
A2.
Software Specifications
Bridging
Transparent Bridging and spanning(IEEE 802.1D) with at least 32 MAC
addresses
RFC2684 (RFC 1483) Bridged
Bridge filtering with per-port extensions
Routing
IP routing and PPP supported
PAP and CHAP for user authentication in PPP connection
RFC2684 (RFC1483) Routed
MAC Encapsulated Routing (MER)
DHCP client, server and relay agent
DNS relay
Wireless LAN
Supports 802.1x; WEP; WEP2; WPA; WPA2; TKIP; AES;
Hidden SSID
WMM for advanced Quality of Service
Supports TKIP and AES
Firewall
Support NAT and DMZ
Protection against IP and MAC address spoofing
UPnP NAT traversal and VPN / IPSec pass-through
Configuration and Network Management Features
DHCP client and server for IP management
UPnP Internet Gateway Device (IGD) compliance
WEB for local or remote management
HTTP for firmware upgrade and configuration
Embedded syslog
Support TR-069 with parameters: DeviceInfo, ManagementServer, Time,
IPPingDiagonostic, etc
Note:
The hardware and software specifications are subjected to change without notices.
Page 77 / 82
X5671
User’s Guide
72
Appendix E - Warranties
B1.
Product Warranty
Inteno Broadband Technology AB warrants that the xDSL unit will be free from defects in
material and workmanship for a period of twelve (12) months from the date of shipment.
Inteno Broadband Technology AB shall incur no liability under this warranty if
The allegedly defective goods are not returned prepaid to Inteno Broadband
Technology AB within thirty (30) days of the discovery of the alleged defect and in
accordance with Inteno Broadband Technology AB’ repair procedures; or
Inteno Broadband Technology AB’ tests disclose that the alleged defect is not due to
defects in material or workmanship.
Inteno Broadband Technology AB’ liability shall be limited to either repair or replacement
of the defective goods, at Inteno Broadband Technology AB’ option.
Inteno Broadband Technology AB MARKS NO EXPRESS OR IMPLIED WARRANTIES
REGARDING
THE
QUALITY,
MERCHANTABILITY,
OR
FITNESS
FOR
A
PARTICULAR PURPOSE BEYOND THOSE THAT APPEAR IN THE APPLICABLE
USER’S
DOCUMETATION.
INTENO
SHALL
NOT
BE
RESPONSIBLE
FOR
CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGE, INCLUDING, BUT NOT
LIMITED TO, LOSS OF PROFITS OR DAMAGES TO BUSINESS OR BUSINESS
RELATIONS. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES.
Page 78 / 82
X5671
User’s Guide
73
B2.
Warranty Repair
1.
During the first three (3) months of ownership, Inteno Broadband Technology AB will
repair or replace a defective product covered under warranty within twenty-four (24)
hours of receipt of the product. During the fourth (4th) through twelfth (12th) months
of ownership, Inteno Broadband Technology AB will repair or replace a defective
product covered under warranty within ten (10) days of receipt of the product. The
warranty period for the replaced products shall be ninety (90) days or the remainder
of the warranty period of the original unit, whichever is greater. Inteno Broadband
Technology AB will ship surface freight. Expedited freight is at customer’s expense.
2.
The customer must return the defective product to Inteno Broadband Technology AB
within fourteen (14) days after the request for replacement. If the defective product is
not returned within this time period, Inteno Broadband Technology AB will bill the
customer for the product at list price.
B3.
Out-of-Warranty Repair
Inteno Broadband Technology AB will either repair or, at its option, replace a defective
product not covered under warranty within ten (10) working days of its receipt. Repair
charges are available from the Repair Facility upon request. The warranty on a
serviced product is thirty (30) days measured from date of service. Out-of-warranty
repair charges are based upon the prices in effect at the time of return.
Page 79 / 82
X5671
User’s Guide
74
Appendix F - Regulation
FCC Part 15 Notice
Warning:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 to the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a residential environment. This equipment generates, used, and can
radiate radio frequency energy, and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is unlikely to cause harmful
interference. But if it does, the user will be required to correct the interference at his or
her own expense. The authority to operate this equipment is conditioned by the
requirement that no modifications will be made to the equipment unless Inteno
expressly approves the changes or modifications.
FCC Part 15 Notice with Wireless
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Warning:
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including interference that may cause
undesired operation.
Page 80 / 82
X5671
User’s Guide
75
FCC Part 68 Notice
This equipment complies with Part 68 of FCC Rules. On the base unit of this
equipment is a label that contains, among other information, the FCC Registration
Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED,
THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all of those devices ring when your telephone number is
called. In most, but not all areas, the sum of the REN of all devices connected to one
line should not exceed five (5.0). To be certain of the number of devices you may
connect to you line, as determined by the REN, you should contact your local
telephone company to determine the maximum REN for your calling area.
If your equipment causes harm to the telephone network, the telephone company may
discontinue your service temporarily. If possible, they will notify you in advance. But if
advance notice is not practical, you will be notified as soon as possible. You will be
informed of your right to file a complaint with the FCC. Your telephone company may
make changes in it is facilities, equipment, operations or procedures that could affect
the proper functioning of your equipment. If they do, you will be notified in advance to
give you an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this telephone equipment, Please contact the following
address and phone number for information on obtaining service or repairs.
The telephone company may ask that you disconnect this equipment from the
network until the problem has been corrected or until you are sure that the equipment
is not malfunctioning.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs.
NOTICE: The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or an electronic device to send any message via a
telephone fax machine, unless such a message clearly contains in a margin at the top
or bottom of each transmitted page or on the first page of the transmission the
following information:
The date and time of transmission
Identification of either business, business entity or individual sending message
Telephone number of either the sending machine, business entity or individual
Warning:
Users should not attempt to make such connections themselves, but should
contact appropriate electric inspection authority, or electrician, as appropriate.
Do not use any other power adapter except the one that accompanies the unit. Use of
other adapter could result in damage to the unit. To prevent electronic shock, please do not
open the cover.

Rate

3.5 / 5 based on 2 votes.

Popular Inteno Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top