Page 41 / 82
Scroll up to view Page 36 - 40
X5671
User’s Guide
36
Click
Add
to add Dynamic DNS setting.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 47: Add a Dynamic DNS
Global Setting
Select the Dynamic DNS service provider from the list
Enter the your Hostname
Select the
Interface
from the list where the device can reach it for registration
Enter the
Username
and
Password
for registering IP address of the device to
Dynamic DNS server
Click
Save/Apply
to save the configuration
DSL
The DSL feature provides basic and advance configuration to set the DSL parameters.
Please contact technician for details before changing any parameters.
Figure 48: DSL Basic Configuration
Page 42 / 82
X5671
User’s Guide
37
Global Setting
Check to select the
DSL modulation
modes.
Select the
DSL phone line pair
, inner pair or outer pair. The inner pair is default
setting.
Check to select the
Capabilities
, Bitswap and SRA (Seamless Rate Adaption).
Click
Apply
to save the configuration
Click
Advanced Settings
to get details, please contact technician for support.
Port Mapping
The page provides Port Mapping configuration. In default, the LAN1 to LAN4, wireless,
virtual wireless_guest and Routed PVC are grouped together as a single Ethernet
environment. Port Mapping supports multiple ports to VLAN groups. Each VLAN
group will perform as an independent network. To support this feature, you must
create mapping groups with appropriate LAN and WAN interfaces.
Figure 49: Port Mapping Configuration
Click
Add
to add VLAN setting.
Check
Remove
and click
Remove
to remove the specified entry.
Page 43 / 82
X5671
User’s Guide
38
Figure 50: Add a Port Mapping Configuration
Global Setting
Enter the
Group Name
Select the available
LAN ports
from available LAN interfaces into grouped
interface. The selected LAN interface will be removed from its original group and
joined this new group.
If you like to add LAN clients to a PVC automatically in the new group, add the
DHCP Vendor ID
string. By configuring a DHCP vendor ID string, any DHCP
client request with the specified vendor ID (DHCP option 60) will be denied an IP
address from the local DHCP server.
Click
Save/Apply
to save the configuration.
Page 44 / 82
X5671
User’s Guide
39
7
Wireless Setup
The Wireless Setup web page menu comprises:
Basic
Security
MAC Filter
Wireless Bridge
Advanced
Quality of Service
Station Information
Basic
The device provides wireless connection to wireless clients. This page allows you to
enable the wireless service, hide the network from active scan and set the SSID
(Service Set IDentifier). Besides, it allows you to create a virtual wireless AP which
could use different SSID and security key.
Figure 51: Wireless Setting – Basic
Global Setting
Check to enable
Wireless feature
Check to enable
Hide Access Point
to hide from active scan of wireless client
Enter the
wireless network name (SSID)
The
BSSID
is the MAC address of device
Select the
Country
from the list
Check to enable
Wireless Guest Network
to create a virtual wireless AP with
different SSID and security key
Enter the Guest SSID
Click
Save
to save the configuration
Page 45 / 82
X5671
User’s Guide
40
Security
The device provides wireless connection with security including authentication
method and data encryption to protect your data in the air.
Figure 52: Wireless Setting – Security
Global Setting
Select the SSID from the list, then set the related security parameters
Select the method of Network Authentication. It could be OPEN (none), Shared,
802.1X, WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA, Mixed
WPA2/WPA-PSK
Select the method of
WEP Encryption
if
Network Authentication
is Open. Select
the
Encryption Strength
with 64bits or 128bits, select the current
Key Index
and
enter the key and four keys when necessary if WEP Encryption is enabled.
If the
Network Authentication
is Shared. Select the
Encryption Strength
with
64bits or 128bits, select the current
Key Index
and enter the key and four keys
when necessary as the same as
Network Authentication
is Open and
WEP
Encryption
is enabled.
If the
Network Authentication
is 802.1X, enter the
IP address
and
Port number
of
Radius server,
Radius Key
, enable or disable
WEP encryption
. If
WEP
Encryption
is enabled, select the
Encryption Strength
with 64bits or 128bits,
select the current
Key Index
and enter the key and four keys when necessary.
19216811.live