Huawei SmartAX-MT880v3 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 109 Scroll up to view Page 21 - 25

16

The System View read-only table on the Home Page displays a

summary of various system settings and functions as described in

the table below.

z

Device

: Displaying the basic information about the device

model and software versions.

z

DSL Status

: Displaying the operational status, DSL

version, and performance statistics for the DSL line.

z

WAN Interfaces

: Displaying the names and settings for

the device WAN interfaces. Multiple software-defined

interfaces may be configured to use the DSL connection. In

the WAN interface will display the PVC number, gateway,

IP address, mask, VPI/VCI, encapsulation and status.

z

LAN Interface

: Displaying the names and various settings

of LAN interface, which include MAC address, IP address,

Mask, speed, duplex and status.

z

Services Summary

: Displaying the following services that

the ADSL router performs to help you manage your

network: NAT, IP filter, RIP, DHCP status including DHCP

Relay, DHCP Server or DHCP Client, and IGMP.

4.3

ATM Setting

Click the hyperlink

ATM Setting

in wizard column to open the

ATM setting page.

There are three basic configuring modes for selection in this

web page: RFC2684 Bridged, RFC2684 Routed (IPoA) and PPP.

4.3.1

RFC2684 Bridged Connection

RFC2684 Bridged connections include three modes: Pure

Bridge, Static IP and DHCP.

Page 27 / 109

17

z

PVC:

System provides 8 PVCs. Generally you can leave

this set at the default value 0. This option is also used to

create and configure new PVCs.

z

VPI:

If you need any modification, please enter the VPI

value provided by ISP. See the attached table for all the

VPI default value of PVC.

z

VCI:

If you need any modification, please enter the VCI

value provided by ISP. See the attached table for all the

VCI default value of PVC.

z

Operation Mode:

This also should be left at the default

setting

Enabled

. This enables the PVC used for the initial

connection.

z

Encapsulation:

You can select the mode LLC or VC MUX.

z

Address Type:

The bridged connection modes include

Pure Bridge, Static IP and DHCP.

I.

Pure Bridge

The setting page displayed as below will appear while you

chose Pure Bridge mode. The gray items don’t need configuration.

Page 28 / 109

18

Figure 4-3

RFC2684 bridged connection-application of pure bridge

The RFC2684 bridged connection-application of pure bridge

mode displays a summary of various system settings and functions

as described below:

z

PVC:

System provides 8 PVCs. Generally you can leave

this set at the default value 0. This option is also used to

create and configure new PVCs.

z

VPI:

If you need any modification, please enter the VPI

value provided by ISP. See the attached table for all the

VPI default value of PVC.

Page 29 / 109

19

z

VCI:

If you need any modification, please enter the VCI

value provided by ISP. See the attached table for all the

VCI default value of PVC.

z

Operation Mode:

This also should be left at the default

setting

Enabled

. This enables the PVC used for the initial

connection.

z

Encapsulation:

You can select the mode LLC or VC MUX.

z

Connection Type:

The bridged connection modes include

Pure Bridge, Static IP and DHCP.

z

Traffic Index:

Select the index number for ATM traffic from

the pull-down menu.

z

Configured MTU (Maximum Transmission Unit)

: Enter

the maximum bytes of the packet being transmitted during

connection.

II.

Static IP

The setting page displayed as below will appear while you

select Static IP setting mode. Please fill the corresponding field with

the IP address and network mask provided by ISP. The default

setting of route is “Disable”, and the Gateway IP address is “0.0.0.0.”

The recommended setting is to enable default route and enter the

Gateway IP address provided by ISP.

Page 30 / 109

20

Figure 4-4

RFC2684 bridged connection-application of static IP

z

IP Address

and

Subnet Mask:

Entered IP address and

subnet mask provided by ISP for the WAN interface of your

MT800.

z

Default Route:

This setting specified the IP address below

is used for default route of LAN. The data will be sent

through WAN interface whenever a client LAN computer

accesses the Internet.

z

Gateway IP address:

Enter the Gateway address

provided by ISP.

z

Traffic Index:

Select the index number for ATM traffic from

the pull-down menu.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share