Page 91 / 109
Scroll up to view Page 86 - 90
81
Configurations on MT800
Location
Parameters
Comments
Operation Mode
Select “Enable”.
Encapsulation
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Connection Type
Select “PPP”.
PPPoA/PPPoE
Select “PPPoE”.
User name and
Password
The values shall be provided by your ISP.
Default Route
Select “Enable”.
DNS
Select “Enable”.
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function enabled.
DHCP Mode
It is recommended to have DHCP Server function enabled.
Traffic Index
It is recommended to set 0.
Configurations on the user’s PC
IP Address and
Network Mask
It is recommended to set the mode as obtaining an IP address
automatically.
DNS
It is recommended to set the mode as obtaining a DNS server’s
IP address automatically.
Page 92 / 109
82
5.3
PPPoA Configuration
Configurations on MT800
Location
Parameters
Comments
PVC
Select any one from the eight PVCs.
VPI/VCI
The value shall be provided by your ISP.
Operation Mode
Select “Enable”.
Encapsulation
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Connection Type
Select “PPP”.
PPPoA/PPPoE
Select “PPPoA”.
User name and
Password
The values shall be provided by your ISP.
Default Route
Select “Enable”.
ATM Setting
DNS
Select “Enable”.
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function enabled.
DHCP Mode
It is recommended to have DHCP Server function enabled.
Traffic Index
It is recommended to set 0.
Configurations on the user’s PC
IP Address and
Network Mask
It is recommended to set the mode as obtaining an IP address
automatically.
DNS
It is recommended to set the mode as obtaining a DNS server’s
IP address automatically.
Page 93 / 109
83
5.4
RFC 2684 Bridged (Pure Bridge)
Configuration
Configurations on MT800
Location
Parameters
Comments
PVC
Select any one from the eight PVCs.
VPI/VCI
The value shall be provided by your ISP.
Operation Mode
Select “Enable”.
Encapsulation
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Connection Type
Select “RFC2684 Bridged”.
ATM Setting
Address Type
Select “Pure Bridge”.
Traffic Index
It is recommended to set 0.
Configurations on the user’s PC
PPPoE Dial–up
Application
Before connecting to the Internet, the user shall have PPPoE
dial–up application installed on the PC.
5.5
RFC 2684 Bridged (Static IP) Configuration
Configurations on MT800
Location
Parameters
Comments
PVC
Select any one from the eight PVCs.
VPI/VCI
The value shall be provided by your ISP.
ATM Setting
Operation Mode
Select “Enable”.
Page 94 / 109
84
Configurations on MT800
Location
Parameters
Comments
Encapsulation
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Connection Type
Select “RFC2684 Bridged”.
Address Type
Select “Static IP”.
IP Address and
Subnet Mast
The values shall be provided by your ISP.
Default Route
Select “Enable”.
ATM Setting
Gateway IP
Address
The value shall be provided by your ISP.
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function enabled.
And set DNS IP address provided by your ISP.
DHCP Mode
It is recommended to have DHCP Server function enabled.
Traffic Index
It is recommended to set 0.
Configurations on the user’s PC
IP Address and
Network Mask
It is recommended to set the mode as obtaining an IP address
automatically.
DNS
It is recommended to set the mode as obtaining a DNS server’s
IP address automatically.
Page 95 / 109
85
5.6
RFC 2684 Bridged (DHCP) Configuration
Configurations on MT800
Location
Parameters
Comments
PVC
Select any one from the eight PVCs.
VPI/VCI
The value shall be provided by your ISP.
Operation Mode
Select “Enable”.
Encapsulation
The value shall be provided by your ISP.
Usually you can keep the default value:
LLC.
Connection Type
Select “RFC2684 Bridged”.
Address Type
Select “DHCP”.
Default Route
Select “Enable”.
ATM Setting
Gateway IP
Address
The value shall be provided by your ISP.
NAT
It is recommended to enable the function of NAT.
DNS
It is recommended to have DNS Relay function enabled.
And set DNS IP address provided by your ISP.
DHCP Mode
It is recommended to have DHCP Server function enabled.
Traffic Index
It is recommended to set 0.
Configurations on the user’s PC
IP Address and
Network Mask
It is recommended to set the mode as obtaining an IP address
automatically.
DNS
It is recommended to set the mode as obtaining a DNS server’s
IP address automatically.
19216811.live