Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 96 / 429 Scroll up to view Page 91 - 95

NOTE

If the upper-layer network requires isolation of media streams from signaling streams, create

different traffic streams for the media streams and signaling streams on the OLT, create a

WAN port named

WAN-RTP

on the ONT, and set this WAN port to a media WAN port.

Specifically, choose

Interface 1

>

RTP

and set

Associate WAN Interface

to

WAN2(WAN-

RTP)

.

(6)

Configure SIP protocol parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

>

SIP

. Select

SIP

and enter (or select) a

proper value.

–

Proxy Server: 200.200.200.200

–

Home Domain: softx3000.huawei.com

NOTE

If dual-homing is configured,

Secondary Proxy Server

must be set.

(7)

Configure the voice users.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

88

Page 97 / 429

a.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service

1

>

Interface configuration

>

Interface 1

>

User

. Select

User

, right-click,

and choose

Add

from the shortcut menu.

NOTE

l

The HG8010 does not support voice services.

l

The HG8240/HG8242/HG8245 supports a maximum of two users.

b.

Click

User 1

below

User

and set

Interface ID

to

1

. Click

User 2

below

User

and set

Interface ID

to

2

.

NOTE

If

Interface ID

is

1

, port TEL1 on the ONT is bound. If

Interface ID

is

2

, port TEL2

on the ONT is bound.

(8)

Click

OK

to complete the configuration of the new profile.

4.

Bind the value-added service profile.

(1)

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

(2)

In the navigation tree, choose

GPON

>

GPON Management

.

(3)

In the window on the right, choose

GPON ONU

.

(4)

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

(5)

Select an ONT from the list, right-click, and choose

Bind VAS Profile

from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and

click

OK

to complete profile binding.

5.

Configure ONT value-added services.

(1)

On the

GPON ONU

tab page, select an ONT, right-click, and choose

Configure

Value-Added Service

from the shortcut menu.

(2)

Configure parameters of the SIP-based voice users.

NOTE

The parameters of the SIP-based voice user must be consistent with the corresponding

configuration on the softswitch.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

89

Page 98 / 429

a.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service

1

>

Interface configuration

>

Interface1

>

User

>

User 1

. Select

User

1

and set

Directory Number

to

88001234

.

b.

Select

SIP

below

User 1

and enter a proper value.

–

Auth User Name: [email protected]

–

Auth Password: iadtest1

c.

Set parameters of

User 2

using the same method.

–

Directory Number: 88001235

–

Auth User Name: [email protected]

–

Auth Password: iadtest2

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

90

Page 99 / 429

(3)

Click

OK

. In the dialog box that is displayed, click

OK

. The configurations take

effect without the requirement of resetting the ONT.

----End

Result

Check whether the telephone functions properly. Connect two common telephones phone 1 and

phone 2 to two TEL ports on the ONT and test the dialing between phone 1 and phone 2. In

normal cases:

l

The caller hears the dialing tone after taking the phone off the hook.

l

When the caller dials the telephone number of the callee, the phone of the callee rings

successfully, and the caller hears the ring back tone.

l

The caller and the callee communicate with each other successfully.

l

After the callee hangs up, the caller hears the busy tone.

3.2.6 Configuring GPON FTTH Layer 2 Multicast Service on the

NMS

This topic describes how to configure the multicast service when an ONT is connected to an

OLT through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l

The ONT is connected to the OLT in Layer 2 mode.

l

The OLT uses IGMP proxy, which is a Layer 2 multicast protocol.

l

The IGMP version of the multicast VLAN is IGMPv3.

l

Multicast programs are configured statically.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

91

Page 100 / 429

Figure 3-5

Configuring the GPON FTTH multicast service

Multicast Source

OLT

LAN Switch

Optical splitter

U2000

STB

TV

BRAS

ONT

Procedure

l

Add the ONT to the U2000 in profile mode.

1.

Perform the following operations to add an MDU (not managed by the NAT

agent) that supports xPON upstream transmission.

(1)

On the topological navigation tree, select the required ODN under the OLT node.

Select the splitter under the ODN, right-click, and then choose

New

>

ONU

; or

select the splitter under the ODN, right-click the blank area on the

Physical

Root

interface on the right side, and then choose

New

>

ONU

.

(2)

On the interface that is displayed, set the parameters on the

Basic Parameters

and

Network Management Channel Parameters

tab pages (on this interface,

the ONU that supports the GPON upstream mode is considered as an example).

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

92

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share