Page 41 / 232 Scroll up to view Page 36 - 40
3.2 Logging In Through the Web Page
This topic describes the data plan for and procedure of logging in through the Web Page.
3.2.1 Data Plan
This topic describes the data plan for logging in through the Web Page.
3.2.2 Procedure
This topic describes how to log in through the Web Page.
3.2.1 Data Plan
This topic describes the data plan for logging in through the Web Page.
Before setting up the configuration environment, set parameters as listed in
Table 3-1
.
Table 3-1
Parameters required for setting up the configuration environment
Parameter
Description
User name and password
Default settings:
l
Administrator:
User name:
telecomadmin
Password:
admintelecom
l
Common user:
User name:
root
Password:
admin
LAN IP address and subnet mask
Default settings:
l
IP address: 192.168.100.1
l
Subnet mask: 255.255.255.0
IP address and subnet mask of the PC
Set the IP address of the PC to be in the same
subnet as the LAN IP address of the HG8240/
HG8245/HG8247.
For example:
l
IP address: 192.168.100.100
l
Subnet mask: 255.255.255.0
The differences between the configuration rights of an administrator and a common user are as
follows:
l
An administrator has the right to configure all the parameters on the Web Page.
l
The parameters of certain nodes are unavailable to a common user. Such parameters are:
LAN
>
LAN Port Work Mode
Voice
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-3
Page 42 / 232
Network Application
>
Portal Configuration
and
Network Application
>
Terminal
Limit Configuration
System Tools
>
Time Setting
,
System Tools
>
TR-069
, and
System Tools
>
ONT
Mode
Download Configuration File
and
Upload Configuration File
on the
System Tools
>
Configuration File
page
l
A common user has no right to configure the parameters of certain nodes, such as
WAN
>
WAN Configuration
.
3.2.2 Procedure
This topic describes how to log in through the Web Page.
Procedure
Step 1
Use a network cable to connect a LAN port of the HG8240/HG8245/HG8247 to a PC.
Step 2
Ensure that the Internet Explorer of the PC does not use the proxy server. The following considers
Internet Explorer 6.0 as an example to describe how to check whether the Internet Explorer uses
the proxy server.
1.
Start the Internet Explorer, and choose
Tools
>
Internet Options
from the main menu of
the Internet Explorer window. Then, the
Internet Options
window is displayed.
2.
Click
Connections
to display the
Connections
tab page, and then click
LAN settings
.
3.
In the
Local Area Network (LAN) Settings
window, deselect
Use a proxy server for
your LAN (These settings will not apply to dial-up or VPN connections).
under
Proxy
server
. If this option is selected, deselect it to cancel the settings, and then click
OK
.
Step 3
Log in through the Web Page.
1.
Input
in the address bar of the Internet Explorer (192.168.100.1 is the
default IP address of the HG8240/HG8245/HG8247), and then press
Enter
to display the
login window.
2.
In the login window, input the user name and password. (For default settings of the user
name and password, see
3.2.1 Data Plan
.) After the password authentication is successful,
the Web Page is displayed.
----End
3.3 Overview of the Web Page
This topic describes the Web page of the HG8240/HG8245/HG8247.
The Web page of the HG8240/HG8245/HG8247 consists of the following parts:
l
Navigation tree on the left: Click a link and then perform the configuration on the displayed
page.
l
Configuration management pane on the right: The contents displayed on the right depend
on the function selected in the navigation tree on the left. For details, see the corresponding
configuration page.
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 43 / 232
NOTE
l
The Web page may vary with the software version. The Web page for an administrator and that for a
common user are different. This section considers the Web page for an administrator as an example.
l
The HG8240/HG8245/HG8247 has similar Web pages. This section considers the HG8247 as an
example to describe its Web page. The HG8240 does not provide the Wi-Fi function and therefore its
Web page does not have a Wi-Fi node.
3.3.1 Status
This topic describes how to query the information about the WAN interface, VoIP interface, and
Wi-Fi port through the Web page.
3.3.2 WAN
This topic describes how to configure the WAN interface through the Web page.
3.3.3 LAN
This topic describes how to set the working mode of the LAN port, the LAN host, and the DHCP
server through the Web page.
3.3.4 WLAN
This topic describes how to perform basic and advanced configurations of the WLAN through
the Web page.
3.3.5 Security
This topic describes how to configure the IP address filter, MAC address filter, DoS, and ONT
access control through the Web page.
3.3.6 Route
This topic describes how to configure the default route and static route through the Web page.
3.3.7 Forward Rules
This topic describes how to configure the DMZ, port mapping, and port trigger through the Web
page.
3.3.8 Network Applications
This topic describes how to configure the USB, ALG, UPnP, and ARP through the Web page.
3.3.9 Voice
This topic describes how to configure the voice service through the Web page.
3.3.10 System Tools
This topic describes how to use the system tools on the Web page, including using the tools to
restart the device, restore the default configuration, and conduct the test.
3.3.1 Status
This topic describes how to query the information about the WAN interface, VoIP interface, and
Wi-Fi port through the Web page.
WAN Information
Click the
Status
tab and then choose
WAN Information
from the navigation tree. In the pane
on the right, you can view the status of the WAN interface, mode of obtaining an IP address, IP
address, and subnet mask, as shown in
Figure 3-1
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-5
Page 44 / 232
Figure 3-1
WAN Information
VoIP Information
Click the
Status
tab and then choose
VoIP Information
from the navigation tree. Then, in the
pane on the right, you can query the information such as user status and call status. The SIP
configuration page is slightly different from the H.248 configuration page, as shown in
Figure
3-2
and
Figure 3-3
.
Figure 3-2
VoIP Information - SIP
Figure 3-3
VoIP Information - H.248
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 45 / 232
If the VoIP service needs to be restarted, click
Reset VoIP
in the pane on the right.
WLAN Information
Click the
Status
tab and then choose
WLAN Information
from the navigation tree. Then, in
the pane on the right, you can query the information such as WLAN status, WLAN packet
statistics, and SSID, as shown in
Figure 3-4
.
Figure 3-4
WLAN Information
l
In the pane on the right, click
Enable
or
Disable
to enable or disable the Wi-Fi function.
l
Click the link in blue to go to the corresponding configuration page.
Eth Port Information
Click the
Status
tab and then choose
Eth Port Information
from the navigation tree. In the
pane on the right, you can view the duplex mode, speed, and status of the ETH port, as shown
in
Figure 3-5
.
Figure 3-5
Eth Port Information
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-7

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top