1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8245H Orange
    5. /
  5. 10
Page 46 / 232 Scroll up to view Page 41 - 45
DHCP Information
Click the
Status
tab and then choose
DHCP Information
from the navigation tree. In the pane
on the right, you can view the basic information about the DHCP server, including the IP address
assigned to the connected PC through DHCP, MAC address, and remaining lease time, as shown
in
Figure 3-6
.
Figure 3-6
DHCP Information
Optical Information
Click the
Status
tab and then choose
Optical Information
from the navigation tree. In the pane
on the right, you can view the optical status, transmit optical power, receive optical power of
the optical module, as shown in
Figure 3-7
.
Figure 3-7
Optical Information
Battery Information
Click the
Status
tab and then choose
Battery Information
from the navigation tree. In the pane
on the right, you can view the connection status and available capacity of the external standby
battery, as shown in
Figure 3-8
.
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 47 / 232
Figure 3-8
Battery Information
Device Information
Click the
Status
tab and then choose
Device Information
from the navigation tree. In the pane
on the right, you can view the product name, hardware version, and software version, as shown
in
Figure 3-9
.
Figure 3-9
Device Information
Remote Management
Click the
Status
tab and then choose
Remote Manage
from the navigation tree. In the right
pane, view the remote management status and service application status, as shown in
Figure
3-10
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-9
Page 48 / 232
Figure 3-10
Remote management
3.3.2 WAN
This topic describes how to configure the WAN interface through the Web page.
WAN Configuration
l
WAN Configuration - route
1.
Click the
WAN
tab and then choose
WAN Configuration
from the navigation tree.
In the pane on the right, click
New
. In the dialog box that is displayed, set
Mode
to
Route
, as shown in
Figure 3-11
.
Figure 3-11
WAN Configuration - Route
2.
Click
Apply
.
Table 3-2
describes the parameters related to the WAN in route mode.
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)
Page 49 / 232
Table 3-2
Parameters related to the WAN in route mode
Parameter
Description
Enable
Indicates whether to enable the WAN
connection.
Service List
Indicates the service type of the WAN
interface. It can be set to TR069,
INTERNET, TR069_INTERNET, VOIP,
TR069_VOIP, VOIP_INTERNET,
TR069_VOIP_INTERNET, IPTV or
OTHER.
VLAN ID
Indicates the VLAN ID. It ranges from 1 to
4094.
The VLAN ID must be the same as the
CVLAN ID on the OLT.
802.1p
Indicates the 802.1p value. It ranges from
0 to 7.
IP Acquisition Mode
Indicates the mode of obtaining an IP
address on the ONT. It can be set to DHCP,
static, or PPPoE.
l
In DHCP mode, the IP address is
dynamically obtained.
l
In static mode, the IP address is set
statically. You need to enter the IP
address, subnet mask, IP addresses of
the active and standby DNS servers,
and default gateway.
l
In PPPoE mode, you need to enter the
user name and password.
NAT
Indicates whether to enable the NAT
function.
Vendor ID
Set the option 60 field on the DHCP client.
The IP address can be obtained from the
DHCP server only when the option 60 field
is the same as the setting on the upper-layer
DHCP server. When
IP Acquisition
Mode
is set to
DHCP
, this parameter is
configurable.
Binding options
Used to bind the WAN interface to the
LAN port or to the wireless SSID.
NOTE
Before setting the binding options, set the work
mode of the LAN port or the wireless SSID. The
binding options can be set only after the work
mode or wireless SSID is successfully set. For
details, see
LAN Port Work Mode
and
WLAN Configuration
.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3 Configuration Guide
Issue 02 (2011-01-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-11
Page 50 / 232
l
WAN Configuration - bridge
1.
Click the
WAN
tab and then choose
WAN Configuration
from the navigation tree.
In the pane on the right, click
New
. In the dialog box that is displayed, set
Mode
to
Bridge
, as shown in
Figure 3-12
.
Figure 3-12
WAN Configuration - Bridge
2.
Click
Apply
.
Table 3-3
describes the parameters related to the WAN in bridge mode.
Table 3-3
Parameters related to the WAN in bridge mode
Parameter
Description
Enable
Indicates whether to enable the WAN
connection.
Service List
Indicates the service type of the WAN
interface. It can be set to TR069, IPTV or
OTHER.
VLAN ID
Indicates the VLAN ID. It ranges from 1 to
4094.
The VLAN ID must be the same as the
CVLAN ID on the OLT.
MultiCast VLAN ID
The multicast VLAN ID ranges from 1 to
4094.
The multicast VLAN ID must be the same
as the multicast VLAN ID on the OLT.
3 Configuration Guide
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-12
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2011-01-26)

Rate

3.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top