Page 21 / 54
Scroll up to view Page 16 - 20
18
6.
In
URL to block
, enter the Web site address you specify.
7.
Set
Manually specify devices
to enable.
8.
In
Apply to
, select the computer name for you wanted.
9.
Click
Save
.
Controlling Computer Bandwidth
By configuring bandwidth control policies, you can control the bandwidth of computers connected to
the HG658 V2 in the following ways:
•
Determine the minimum bandwidth allocated to specific computers to help ensure the Internet
access speed for those computers.
•
Determine the maximum bandwidth certain computers can occupy so that bandwidth remains
available to other computers.
1.
Log in to the web management page.
2.
Choose
Internet
tab.
3.
In the navigation tree, choose
Bandwidth Control
.
4.
Select
Bandwidth Control
configuration page.
5.
Set
Enable bandwidth control
to enable.
6.
In
Ingress bandwidth
, enter the rate value you specified.
Page 22 / 54
19
7.
Click
Save
.
You can configure different bandwidth control policies for different computers.
The configuration procedure is as follows:
1.
Click
New
.
2.
In
Traffic classifier name
, enter a bandwidth control name you specified.
3.
In
Schedule priority
, select the schedule priority you specified.
4.
In
Upload min
and
Upload max
, enter the rate value you specified.
5.
In
Traffic management type
, select the traffic management type you specified.
•
When the Traffic Management Type is
IP QoS classification
, enter the IP address of the computers you
want to control in
IP address
.
•
When the Traffic Management Type is
MAC QoS classification
, select the MAC address of the
computer you want to control in
MAC address
.
•
When the Traffic Management Type is
LAN QoS classification
, select the interface of the computer you
want to control in
LAN interface
.
•
When the Traffic Management Type is
Application QoS classification
, enter the Application name you
specified in
Application
.
Page 23 / 54
20
6.
Click
Save
.
Configure the Firewall to Prevent Attacks on the Internet
The Description of Firewall Level
The preset protective levels of the firewall are as follows:
Recommended Firewall Level
To better protect your privacy and prevent the HG658 V2 from malicious network attacks,
recommended setting the firewall level to
High
, so the LAN computers can only browse the web and
download files using FTP server, while prohibiting Internet users access to HG658 V2.
Configuring the Firewall
The HG658 V2 provides a firewall to help secure its WLAN and any devices connected to it. Set the
firewall level based on site requirements to quickly configure the firewall.
1.
Log in to the web management page.
Level
Description
High
When you set the firewall level of the router to
High
, only the FTP / DNS /
HTTP packet is allowed to pass through.
Low
When you set the firewall level of the router to
Low
, the packets from the
LAN to the WAN are allowed to pass through.
Disabled
When you set the firewall level of the router to
Disabled
, all data packets are
allowed to pass through.
Page 24 / 54
21
2.
Choose
Internet
tab.
3.
In the navigation tree, choose
Network Security
.
4.
Select
Firewall
configuration page.
5.
In
Firewall level
, select the firewall level you specified.
6.
Click
Save
.
Configure DMZ
After DMZ is enabled, the computer that is configured as a DMZ host is exposed to the Internet. For
example, when building a server, you can configure the computer providing external services as a
DMZ host, which helps protect other computers on the home network.
1.
Log in to the web management page.
2.
Choose
Internet
tab.
3.
In the navigation tree, choose
Network Security
.
4.
Select
DMZ
configuration page.
5.
In
Host address
, select the device you want to specified, or click
Add device
to add a new device for
DMZ host.
6.
Set
Enable DMZ
to enable.
7.
Click
Save
.
Page 25 / 54
22
Configure Application Filter
To enable application filter function on specified computer, you can block network attacks from
applications to the specified computer.
1.
Log in to the web management page.
2.
Choose
Internet
tab.
3.
In the navigation tree, choose
Network Security
.
4.
Select
Application Filter
configuration page.
5.
Click
New application filter
.
6.
In
Filter name
, enter a rule name you specified.
7.
In
Block
, select the application you want to set, or click
Add application
to add a new port
application.
8.
In
Block for
, select the computer name you want specified.
9.
Click
Save
.
19216811.live