1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG658
    5. /
  5. 3
Page 11 / 54 Scroll up to view Page 6 - 10
8
3
Setting Network Parameters
Setting the Computer IP Address
Before logging in to the HG658 V2 web management page, set the IP address of the computer that
will be used for the login.
On Windows 7
1.
Click
in the lower right corner of your desktop. Choose
Open Network and Sharing Center
.
2.
Choose
Change adapter settings
. Right-click
Local Area Connection
and choose
Properties
.
3.
Double-click
Internet Protocol Version 4 (TCP/IPv4)
.
4.
Select
Obtain an IP address automatically
and
Obtain DNS server address automatically
. Click
OK
.
Logging In to the Web Management Page
The HG658 V2 provides an intuitive web management page where you can view or set the HG658 V2
parameters.
Before you log in to the HG658 V2 web management page, ensure that the computer used for
the login is connected to the HG658 V2 and has been configured to automatically obtain an IP
address or assigned with a static IP address.
1.
Open a browser. In the address box, enter
192.168.1.1
. Press
Enter
.
2.
Enter the login user name (
user
by default) and password (
HuaweiUser
by default). Click
Login
.
To protect against unauthorized access, change the user name and password after the first
login.
Setting Network Access Parameters
Configuring an Automatical Connection to Access the Internet
TheHG658 V2 supports you to choose the proper connection mode automatically to access the
Internet, meaning you do not need to install dial-up software or perform dial-up operations on your
computer and just following the wizard page.
To set up an automatical connection to access the Internet:
1.
Log in to the web management page.
2.
Choose
Home
tab, click
Start Wizard
.
Page 12 / 54
9
3.
On the
I want to... Connect to the Internet
page, selcet
Agree
, and click
Next
.
4.
Select your Internet connection mode.
Refer to the following table to configure the network connection.
Scenario Connection
Type
When you are unsure of the network connection you
subscribed to, you can select this mode that the device will
detect the network connection automatically.
Connect automatically
The account name and password are provided by your
Internet Service Provider (ISP).
Connect with user account
No parameter is provided by your ISP. The IP address is
automatically assigned by the ISP.
Connect without user account
Page 13 / 54
10
5.
Set WLAN parameters.
•
If you selected
Connect with user account
，
enter the parameters provided by your ISP and click
Next
.
•
If you selected
Connect without user account
or
Connect with another modem
, click
Next
.
If you selected
Connect with user account
or
Connect without user account
, the computer
automatically connects to the Internet as long as the router is working properly.
6.
Choose
Home
tab, click
Set Up WLAN
, set WLAN parameters, and click
Save
.
To obtain the default SSID and key, check the label on the rear panel. To better secure your
WLAN, promptly change the SSID and key.
The user name and password are provided by ISP. Set up a
dial-up connection on one computer only.
Connect with another modem
Scenario Connection
Type
Page 14 / 54
11
4
Wireless Connection Setup
Setting Up a Wireless Connection Using the WPS Button
Push the WPS button once to quickly set up a wireless connection between the HG658 V2 and any
WPS-capable device.
Before you set up a wireless connection using the WPS button, verify the following:
•
The wireless network security mode of the HG658 V2 is WPA2-PSK or WPA-PSK/WPA2–PSK.
•
The wireless device (laptop, tablet, or mobile phone) to connect to the HG658 V2 is WPS-capable.
1.
Press the WPS button on the wireless device to start WPS negotiation. For details, see the user
guide for the wireless device.
2.
Within 2 minutes, press and hold the WPS button on the HG658 V2 for 1 second or more. The WPS
indicator blinks.
When the WPS indicator of the HG658 V2 is on and then turn off, a connection between the HG658
V2 and wireless device has been set up.
Manually Setting Up a Wireless Connection
The wireless configuration software provided by Windows is used as an example to describe how to
set up a wireless connection.
You can also use the tool built into the network adapter to set up a wireless connection. For details,
see the network adapter's user guide.
Before setting up a wireless connection, record the WLAN name and password of the HG658 V2. The
default WLAN name and password are printed on the HG658 V2 cover label.
On Windows 7
1.
Click
in the lower right corner of your desktop.
2.
From the wireless network list, select the WLAN provided by the HG658 V2. Click
Connect
.
3.
In the displayed dialog box, enter the WLAN password and click
OK
.
4.
In the wireless network list, check the WLAN connection status. If the status is
Connected
, the
computer is wirelessly connected to the HG658 V2.
Page 15 / 54
12
5
WLAN Configuration
Enabling and Disabling the WLAN on the HG658 V2
The following two methods are available to enable and disable the WLAN on the HG658 V2.
Using the WLAN Button
Press the WLAN button in the HG658 V2 to enable or disable the WLAN. To ascertain whether the
WLAN is enabled, view the WLAN indicator.
Using the Web Management Page
1.
Log in to the web management page.
2.
Choose
Home Network
tab.
3.
In the navigation tree, choose
WLAN Settings
.
4.
Select
Basic Settings
configuration page.
5.
Set
Enable WLAN 2.4 GHz
to enable.
6.
Click
Save
.
Changing Your WLAN Name and Password
WLAN access requires the WLAN name and password. To improve your WLAN security, regularly
change your WLAN name and password.
1.
Log in to the web management page.
2.
Choose
Home Network
tab.
3.
In the navigation tree, choose
WLAN Settings
.
4.
Select
WLAN Encryption
configuration page.
5.
In
SSID
, enter a new WLAN name.
6.
In
WPA pre-shared key
, enter a new WLAN password.
7.
Click
Save
.

Rate

4.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top