33

HG658 V2 supports USB printers. After you connect a USB printer to your HG658 V2 through the USB

port, you can access the printer from the Internet or internal network.

1.

Connect the USB cable of the printer to the USB port on the HG658 V2.

2.

Add a Network Printer.

On Windows 7

1.

Choose

Start

>

Devices and Printers

.

2.

Choose

Add a printer

.

3.

Choose

Add a network, wireless or Bluetooth printer

.

4.

Click

The printer that I want isn't listed

.

5.

Choose

Select a shared printer by name

and enter the printer address

in the text box.

myprinter

is

the customized name of the printer to add. Click

Next

.

6.

Select the model of the printer you want or click

Have Disk

to manually install the printer drive.

7.

Click

OK

.

After you complete the preceding settings, open the files you want to print on your computer. Then

you can choose the printer just installed to print your files.

34

The IP address used to log in to the HG658 V2 web management page is the HG658 V2 IP address.

For security or other purposes (for instance, if the default HG658 V2 IP address conflicts with that of

another device on the same network), you can change the HG658 V2 IP address.

1.

Log in to the web management page.

2.

Choose

Home Network

tab.

3.

In the navigation tree, choose

LAN Interface

.

4.

Select

LAN Interface Settings

configuration page.

5.

In

IP address

, enter a new IP address (Such as: 192.168.6.1).

6.

Click

Save

.

Use the new IP address to log in to the web management page.

The correct user name and password are required to log in to the web management page. Regular

changes to the web management page user name and password can effectively prevent unauthorized

users from logging in and modifying important parameters.

1.

Log in to the web management page.

2.

Choose

Maintain

tab.

3.

In the navigation tree, choose

Account Management

.

4.

Select

Modify Login Password

configuration page.

5.

Click

Edit

beside the user account you want to modify.

6.

In

Current password

, enter the currently used password.

35

7.

In

New password

, enter a new password, in

Confirm password

, enter the new password again.

8.

Click

Save

.

After the user name and password are changed, the login page is displayed. Enter your new user

name and password to log in.

If you forget the password, you can restore the default settings by pressing and holding the

Reset

button on the rear panel of the HG658 V2 for over 6 seconds. The user name and

password used for logging in to the web management page are then restored to their default

values. After the HG658 V2 is restored to its default settings, all user customized data will be

lost. Perform this operation with caution.

Using the Reset Button

If you forget the login password to the web management page or could not access the web

management page, use the reset button on the HG658 V2 rear panel to restore the HG658 V2 to its

default settings. Perform this operation with caution. After the HG658 V2 is restored to its default

settings, all custom data and settings will be lost, and the password will be restored to

HuaweiUser

.

1.

Press the HG658 V2 power button to power the HG658 V2 on.

2.

Press and hold the reset button for 6seconds or more.

The HG658 V2 will restart, which will cause temporary network interruptions.

After the HG658 V2 is restored to its default settings, change the computer IP address so that it is in

the same network segment as the 192.168.1.1 default IP address.

Using the Configuration Tool

If the HG658 V2 parameter settings were configured incorrectly, log in to the web management page

to restore the HG658 V2 to its default settings. Perform this operation with caution. After the HG658

V2 is restored to its default settings, all custom data and settings will be lost, and the password will

be restored to

HuaweiUser

.

36

1.

Log in to the web management page.

2.

Choose

Maintain

tab.

3.

In the navigation tree, choose

Device Management

.

4.

Select

Factory Restore

configuration page.

5.

Click

Restore

.

6.

In the displayed dialog box, click

OK

.

The HG658 V2 supports upgrade firmware through the web management page. Before upgrading the

firmware, please download the latest firmware of the HG658 V2 at the Huawei's official website.

To avoid any damage to the HG658 V2, do not power off the HG658 V2 when it is being

upgraded.

1.

Log in to the web management page.

2.

Choose

Maintain

tab.

3.

In the navigation tree, choose

Device Management

.

4.

Select

Firmware Upgrade

configuration page.

5.

Click

Browse...

, and select the latest firmware you download at the Huawei's official website.

6.

Click

Upgrade

.

After the firmware is upgraded, the login page is displayed. Reenter to log in.

HG658 V2 supports the Ping function. You can check the connection between the HG658 V2 and

other hosts (including network equipment) connection, such as the connectivity or delay and etc

between the HG658 V2 and other hosts.

1.

Log in to the web management page.

2.

Choose

Maintain

tab.

37

3.

In the navigation tree, choose

Tools

.

4.

Select

Ping

configuration page.

5.

In

Target address

, enter the IP address or domain name you want to test.

6.

Click

Detect

.

Tracert function is used to detect the number of other routers that passed when the HG658 V2 is

connected to the test host.

1.

Log in to the web management page.

2.

Choose

Maintain

tab.

3.

In the navigation tree, choose

Tools

.

4.

Select

Traceroute

configuration page.

5.

In

Target address

, enter the IP address or domain name you want to test.

6.

Click

Detect

.