Huawei HG655d Router Manual PDF (Setup & Configuration Guide)

Page 21 / 33 Scroll up to view Page 16 - 20

6.

In the Wireless Network Connection dialog box, select the WLAN with

the same name that is configured in Step 1, and then click

Connect

in the

lower right corner of the window.

7.

In the displayed dialog box, enter the access password that is preset in

Step 1, and then click

Connect

.

After the password is authenticated, Connected is displayed in the upper right

corner of the WLAN icon in the WLAN list, indicating that a wireless

connection is set up between you PC and the HG655d.

8.

Close the

Wireless Network Connection

dialog box.

9.

In the

Wireless Network Connection

Properties

dialog box, click

OK

.

16

Page 22 / 33

6

Setting the VoIP Parameters

6.1

Voice Service Introduction

The HG655d supports voice services based on the Session Initiation Protocol (SIP).

The SIP is an application layer protocol used to create, modify, or end multimedia

sessions.

The HG655d enables voice service interworking between the Internet and the Public

Switched Telephone Network (PSTN).

6.2

Networking

Figure 6-1 shows the network model of voice services.

Figure 6-1

Network model of voice services

17

Page 23 / 33

Table 6-1

Description of the equipment in voice service networking

No.

Item

Description

1

Proxy Server

A server that forwards requests or responses in

place of the client

2

Registrar Server

A server that receives registration requests

3

BRAS

Broadband Remote Access Server

4

DSLAM

Digital Subscriber Line Access Multiplexer

5

HG655d

-

6

Telephone

-

7

Computer

-

6.3

Configuration Procedure

The VoIP parameter has been configured with the delivered HG655d. In general, this

parameter does not need to be configured and please keep the default settings.

18

Page 24 / 33

7

Configuring the Basic Settings

7.1

Changing the Administrator Password

For safety reasons or to make the password easy to remember, you can change the

administrator password for login after logging in to the web page.

To change the password, do as follows:

Step 1

Log in to the web page.

Step 2

Choose

Maintenance

>

Account

in the navigation tree to display the system

management page.

Step 3

Select

admin

from the

User name

drop-down combo box.

Step 4

Enter the

Current password

and the

New password

. Then enter the new

password again in the

Confirm password

text box for confirmation.

Step 5

Click

Submit

to save the settings.

After you change the password successfully, the current page jumps to the page for

logging in to the web page. To log in to the web page, enter the new password, and then

click

Submit

.

If you forget the user name or password that has been changed, you can

restore the default settings of the HG655d by pressing and holding the

RESET button for over six seconds. Then, the user name and password

that are used for logging in to the web page are restored to default

values. After you restore the default settings, however, your customized

data is lost. Therefore, use this function with caution.

7.2

Enabling or Disabling the Wireless

Network Function

You can quickly enable or disable the wireless network function by pressing the

WLAN button on the HG655d. To enable the wireless network function, press and hold

the WLAN button for over one second, and then release the button. You can disable the

wireless network function in the same way. The WLAN indicator shows whether the

wireless network function is enabled.

In addition, you can enable or disable the wireless network function through the web

page. To enable or disable the wireless network function, do as follows:

Step 1

Log in to the web page.

19

Page 25 / 33

Step 2

In the navigation tree on the left, choose

Basic

>

WLAN

.

Step 3

Select or not select the

Enable

WLAN

option.

Step 4

Click

Submit

to save the settings.

7.3

Changing the Wireless Network Name and

the Access Password

To change the name and access password for the wireless network, do as follows

(taking the authentication type WPA-PSK as an example):

Step 1

Log in to the web page.

Step 2

In the navigation tree on the left, choose

Basic

>

WLAN

.

Step 3

Enter the new wireless network name in the

SSID

text box.

Step 4

Select

WPA-PSK

from the

Security

drop-down combo box.

Step 5

Enter the new access password in the

WPA pre-shared key

text box.

Step 6

Select

AES

from the

WPA encryption

drop-down combo box.

Step 7

Click

Submit

to save the settings.

7.4

Changing the Login IP Address

To make the login IP address easy to remember, you can change the IP address after

logging in to the web page.

To change the IP address, do as follows:

Step 1

Choose

Basic

>

LAN

in the navigation tree.

Step 2

Select the

DHCP

page.

Step 3

Enter a new IP address as desired in the

IP address

text box. Then, enter a

subnet mask in

Subnet mask

.

Step 4

Click

Submit

to save the settings.

To log in to the web page after you change the IP address successfully,

you need to launch the Internet Explorer, and then enter the new IP

address. Ensure that the IP address of the computer is in the same network

segment as that of the HG655d so that the computer can access the web

page.

20

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share