Page 11 / 33 Scroll up to view Page 6 - 10
2
Product Overview
2.1
Indicators
Figure 2-1
Indicators on the front panel
Table 2-1
Description of the indicators
Indicator
Status
Description
On
The HG655d is powered on.
POWER
Off
The HG655d is powered off.
On
The DSL connection is established and activated.
Blinking
The DSL connection is being activated.
DSL
Off
The HG655d is powered off or faulty.
6
Page 12 / 33
Indicator
Status
Description
On
The WAN connection is successfully established but
no data is being transmitted.
Blinking
The WAN connection is successfully established and
data is being transmitted.
INTERNET
Off
The HG655d is powered off or the WAN connection
is not yet established.
On
The LAN connection is successfully established but
no data is being transmitted.
Blinking
The LAN connection is successfully established and
data is being transmitted.
LAN1, LAN2,
LAN3, LAN4
Off
The HG655d is powered off or the LAN connection
is not yet established.
On
The WLAN connection is successfully established
but no data is being transmitted.
Blinking
The WLAN connection is successfully established
and data is being transmitted.
WLAN
Off
The HG655d is powered off or the WLAN
connection is not yet established.
Solid On
300s
The WPS password has switched successfully.
Blinking
The WPS password is being switched.
WPS
Off
The HG655d is powered off.
On
The softswitch has logged in successfully.
VOIP
Off
The HG655d is powered off or no softswitch
connection.
On
The USB connection is successfully established at
USB host mode but no data is being transmitted.
Blinking
The USB connection is successfully established at
USB host mode and data is being transmitted.
USB
Off
The HG655d is powered off or the USB connection
is not yet established.
7
Page 13 / 33
2.2
Interfaces and Buttons
Figure 2-2
Interfaces and buttons
Table 2-2
Description of the interfaces and buttons
Interface/Button
Function
PHONE1, PHONE2
Connects a phone.
LAN1–LAN4
Connect PCs, switches, or other equipment.
RESET
Restarts the equipment if this button is pressed and held
for three to six seconds, restores the factory settings of the
equipment if held for more than six seconds.
NOTE
After you restore the default settings, the customized data
will be lost. So press the RESET button with caution.
WPS
Used to start the WPS negotiation.
WLAN
Used to enable or disable the WLAN function.
ON/OFF
Used to power on or off the HG655d.
POWER
Connects a power adapter.
USB
Connects a USB device, such as a specified model of
Huawei HSPA data card or a hard disk.
8
LINE
Connects
to
PHONE
the
DSL
Connects
to the
MODEM interface on the
splitter.
interface on the
splitter.
Page 14 / 33
3
Product Installation and Getting Started
3.1
Selecting the Installation Position
If you need to use the WLAN function of the HG655d, pay attention to the following
requirements when selecting the installation position of the HG655d:
z
Obstacles, such as cement walls and wooden plate walls, would affect the radio
signal propagation effect of wireless networks. Therefore, it is recommended that
the HG655d be installed in an open space so that no obstacles exist between the PC
and the HG655d to block signal propagation.
z
Ensure that the HG655d and the PC are placed away from electrical appliances
generating a strong magnetic or electric field, such as microwave ovens.
9
Page 15 / 33
3.2
Connecting the Cables
Before connecting the cables, power off all equipment connected to it
including the HG655d, the PC, and the switch.
Figure 3-1
Cable connection
1
Phone jack on the wall
2
Splitter
3
Telephone
4
Set-top box
5
PC
6
Power adapter
3.3
Getting Started
To power on the HG655d, press the
ON/OFF
button on the rear panel of the HG655d.
After you power on the HG655d, the
DSL
indicator blinks (for less than three minutes),
which indicates that the HG655d is being activated. Later, the
DSL
indicator turns solid
on. The
POWER
indicator is also solid on, which indicates that the HG655d is working
properly.
10

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top