1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG655d
    5. /
  5. 4
Page 16 / 33 Scroll up to view Page 11 - 15
4
Setting the Internet Access Parameters
The HG655d supports VDSL2 uplink and High-Speed Packet Access (HSPA) uplink
through Huawei HSPA data card. You can access the Internet through the DSL link and
HSPA link.
4.1
Configuring the HSPA uplink
When the HG655d is working through the Huawei HSPA data card, you need to install
the Huawei HSPA data card on the HG655d. To create a HSPA uplink connection, do
as follows.
Step 1
Setting the WAN Parameters.
1.
Launch the Internet Explorer and enter
in the address
bar, and then press
Enter
.
2.
Enter the user name and the password (
admin
and
admin
by default), and
then click
Login
.
3.
Click
Basic
>
WAN
.
4.
Click
New
.
5.
Select
UMTS1
from the
Connection device
drop-down combo box.
6.
Select
Enable
for
WAN connection
.
7.
Select
IP_Route(PPP
) from the
Connection type
drop-down combo box
8.
Enter the user name and password in the
User name
and
Password
text
boxes.
9.
Enter the APN and the Dial number that are provided by the Internert
Service Provider (ISP) in the
APN
and
Dial number
text boxes.
10.
Keep the default vale for other parameters and click
Submit
.
Step 2
Insert the Huawei HSPA data card that the ISP specified to the USB interface
on the HG655d.
Step 3
Verify the PIN Code of SIM Card.
1.
Click
Advanced
>
PIN
.
2.
Enter the original PIN number in the
PIN
text box.
3.
Click
Submit
.
4.2
Configuring the DSL uplink
By configuring the DSL uplink, you can choose any of the following methods to surf
the Internet:
z
Using the Embedded PPP Dial-Up Software on the HG655d
11
Page 17 / 33
z
Using the PPP Dial-Up Software on Your Computer
Using the Embedded PPP Dial-Up Software on the HG655d
If you select this method for accessing the network, the HG655d starts to set up a
dial-up connection automatically after the startup. You can access the network after you
power on your computer.
To configure the HG655d and your computer for the network access, do as follows:
Step 1
Log in to the web page.
Step 2
Configure the PTM PVC and ATM PVC.
1.
In the navigation tree, choose
Basic
>
ATM
.
2.
Click
New
.
3.
Enter VPI and VCI in the
VPI/VCI
text box provided by the Internet
Service Provider.
4.
Select
EoA
from the
DSL link type
option button, and keep the default
settings of other parameters.
5.
Click
Submit
.
Just keep the default settings for PTM settings.
Step 3
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the web page, choose
Basic
>
WAN
.
2.
Click
New
.
3.
Select a PVC from the
Layer2 interface
drop-down combo box.
z
The HG655d supports ADSL/VDSL compliance uplink.
z
When choose the ADSL uplink mode, the name of PVC should be
composed by the value of VPI and VCI. When choose the VDSL
uplink mode, the name of PVC should begin with
ptm
.
4.
Select
Enable
check box for
WAN connection
.
5.
Select
VOICE_TR069_INTERNET
from the
Service list
drop-down
combo box.
6.
Select
Route
from the
Connection mode
drop-down combo box.
7.
Select
PPPoE
option button for
Connection type
.
8.
Select
Enable
check box for
NAT
.
9.
Enter the user name and password that are provided by the ISP in the
User name
and
Password
text boxes, and keep the default settings of
other parameters.
10.
Click
Submit
.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
12
Page 18 / 33
Using the PPP Dial-Up Software on Your Computer
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
operations on your computer upon each startup.
To configure the HG655d and your computer for the network access, do as follows:
Step 1
Set the working mode of the HG655d to
Bridge
.
For details, refer to the procedure for enabling the embedded dial-up function described
in Step 2 in section "Using the Embedded PPP Dial-Up Software on the HG655d." Note
that
Bridge
is selected from the
Connection mode
drop-down combo box.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating systems. To
create a dial-up connection, do as follows (taking the Windows XP operating system as
an example):
1.
Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2.
Click
Create a new connection
in
Network Tasks
to display the
New
Connection Wizard
window, and then click
Next
.
3.
Select
Connect to the Internet
, and then click
Next
.
4.
Select
Set up my connection manually
, and then click
Next
.
5.
Select
Connect using a broadband connection that requires a user
name and password
, and then click
Next
.
6.
Enter the name (as desired) of the dial-up connection in
ISP Name
, and
then click
Next
.
7.
Select
Anyone's use
or
My use only
, and then click
Next
.
8.
Enter the user name and password provided by the network operator and
used for the dial-up connection, and then click
Next
.
9.
Select
Add a shortcut to this connection to my desktop
, and then click
Finish
.
An icon for the dial-up connection is displayed on the desktop of your computer.
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click
Connect
in the
displayed dialog box.
13
Page 19 / 33
5
Configuring the Wireless Connection
If a wireless network adapter is installed on your computer, you can connect you
computer to the HG655d through a wireless connection.
The hardware installation methods and driver installation methods of
wireless network adapters provided by different companies vary from each
other. For details, see the installation guide provided by the wireless
network adapter provider.
5.1
Setting Up a Wireless Connection by WPS
The HG655d supports the Wi-Fi Protected Setup (WPS) function. If your network
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG655d quickly.
To set up a wireless connection by WPS, do as follows:
Step 1
Enable the wireless network function.
The WLAN function is enabled by default and the WLAN indicator is on.
Step 2
Press the WPS button to enable the HG655d to enter the WPS negotiation
state. The WPS indicator blinks.
If the WPS indicator does not blink, it indicates that the WPS function
cannot be enabled. Note that the WPS function can be used only when the
wireless network function is enabled
and
the wireless network security
mode of the WLAN is set to WPA-PSK or WPA2-PSK.
Step 3
Enable the WPS negotiation function of the wireless network adapter on your
PC within two minutes, and then wait for a moment (typically 10s and at most
2mins).
The WPS indicator of the HG655d becomes on from the blinking state, indicating that
the HG655d is connected to your PC through the WLAN.
5.2
Setting Up a Wireless Connection Manually
If your network adapter does not support the WPS function, you can set up a wireless
connection between your PC and the HG655d manually.
To manually set up a wireless connection, use either of the following methods:
z
Use the tool provided by your network adapter.
14
Page 20 / 33
For details, see the user guide of your network adapter.
z
Use the wireless configuration software provided by the operating system of your
PC.
If your PC runs on Windows XP, you can use the Wireless Zero Configuration that is
provided by Windows XP to set up a wireless connection between your PC and the
HG655d.
Takes Windows XP as an example, to set up a wireless connection, do as follows:
Step 1
Enable the wireless network function, and set the wireless network name and
access password of the HG655d.
1.
Log in to the web page.
2.
In the navigation tree on the left of the web page, choose
Basic
>
WLAN
.
3.
Select the
Enable
WLAN
.
4.
Enter a wireless network name in the
SSID
text box.
5.
Select
WPA-PSK/WPA2-PSK
from the
Security
drop-down combo
box.
6.
Enter an access password in the
WPA pre-shared key
text box.
7.
Select
AES
from the
WPA encryption
drop-down combo box.
8.
Click
Submit
to save the settings.
Step 2
Enable the wireless configuration service provided by Windows XP.
1.
Right-click
My Computer
, and then choose
Manage
from the shortcut
menu.
2.
In the
Computer Management
window, choose
Computer
Management (Local)
>
Services and Applications
>
Services
.
3.
From the services listed in the right pane of the
Computer Management
window, right-click
Wireless Zero Configuration
, and then choose
Properties
from the shortcut menu.
4.
In the
Wireless Zero Configuration Properties (Local Computer)
dialog box, check whether
Service status
is
Started
. If not, click
Start
.
5.
Click
OK
to close the dialog box, and then close the
Computer
Management
window.
Step 3
Configure the wireless network connection on your computer.
1.
Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2.
In the
Network Connections
window, right-click
Wireless Network
Connection
to display a shortcut menu, and then select
View Available
Wireless Networks
from the shortcut menu.
3.
In the
Wireless Network Connection Properties
dialog box, select
Wireless Networks
.
4.
Select
Use Windows to configure my wireless network settings
.
5.
Click
View Wireless Networks
.
15

Rate

4 / 5 based on 1 vote.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top