Page 36 / 59
Scroll up to view Page 31 - 35
33
>
When the
Traffic Management Type
is
IP Address
, enter the IP address of the
computers you want to control in
IP Address
.
>
When the
Traffic Management Type
is
MAC Address
, select the MAC address of
the computer you want to control in
MAC Address
.
Page 37 / 59
34
>
When the
Traffic Management Type
is
LAN Interface
, select the interface of the
HG532d connected to the computer you want to control in
LAN Interface
.
8.
Click
Apply
.
Configuring the Firewall
The HG532d provides a firewall to help secure its WLAN and any devices connected to it. Set the
firewall level based on site requirements to quickly configure the firewall.
1.
Log in to the web management page.
2.
In the navigation tree, choose
Advanced
>
Firewall
.
3.
In
Firewall level
, select the firewall level you specified.
Page 39 / 59
36
6
WLAN Configuration
Enabling and Disabling the WLAN on the HG532d
The following two methods are available to enable and disable the WLAN on the HG532d.
Using the WLAN Button
Press the WLAN button in the HG532d to enable or disable the WLAN. To ascertain whether the WLAN
is enabled, view the WLAN indicator.
Using the Web Management Page
1.
Log in to the web management page.
2.
In the navigation tree, choose
Basic
>
WLAN
.
3.
Configure
Wireless
.
> Select
Enable
to enable the WLAN.
> Clear
Enable
to disable the WLAN.
Expanding WLAN Coverage
To expand WLAN coverage, use the wireless distribution system (WDS) to set up a wireless
connection between two HG532d devices.
For example, if your house is too large to be fully covered by the WLAN provided by one HG532d
device, add another HG532d device and set up a wireless connection between these two devices
using the WDS. The WLAN coverage is then expanded.
Page 40 / 59
37
While setting up the wireless connection between the two HG532d devices, configure the devices to
use the same radio channel, WLAN name, encryption method, and encryption key.
1.
Find and record the wireless MAC addresses of the two HG532d.
a.
Log in to the web management page.
b.
In the navigation tree, choose
Status
>
LAN
. Click
WLAN
.
c.
Under
Security Settings
, find a character string that is similar to
12:3A:4B:5C:66:90
.
This value is the wireless MAC address of the HG532d.
2.
Configure the WDS function of the first HG532d.
a.
Log in to the web management page.
b.
In the navigation tree, choose
Basic
>
WLAN
. Click
WDS
.
c.
Select
Enable
.
d.
In
Channel
, select a channel for HG532d.
e.
In
Mode selection
, select
Central Base Station
.
f.
In
Repeater MAC Address 1
, enter the wireless MAC address of the other HG532d.
g.
Click
Submit
.
You can click
Scan
under
WIFI AP list
, and select the SSID of the other HG532d to obtain
the wireless MAC address automatically.
19216811.live