13

If you selected

PPPoE

,

Static

, or

DHCP

, the computer automatically connects to the Internet

as long as the HG532d is working correctly. If you selected

Bridge

, use the dial-up software

on the computer to set up a dial-up connection each time you want to access the Internet.

If

Did not get an available network connection

is displayed, set the VPI and VCI to the

values obtained from your ISP and click

Connect

.

14

3.

If

Network connected successfully

is displayed, the HG532d is connected to the Intenet.

You can click

Configure Wireless

to modify the wireless settings.

4.

Enter the SSID (WLAN name) and key and click

Next

.

To obtain the default SSID and key, check the label on the rear panel. To better secure your

WLAN, promptly change the SSID and key.

5.

In the displayed

Wireless config successful

page, click

Completed

to complete the

configuration.

Setting Dial-Up Connection Parameters

When the HG532d works in

Bridge

mode you need to perform this operation. The other three

connection types

PPPoE

,

DHCP

and

Static

do not need to perform this operation.

Before setting dial-up connection parameters, verify that the HG532d is correctly connected to your

computer and you have the dial-up connection account name and password provided by your Internet

service provider (ISP). This section demonstrates how to set up a Point-to-Point Protocol over Ethernet

(PPPoE) connection on Windows.

On Windows 7

1.

Choose

Start

>

Control Panel

>

Network and Internet

>

Network and Sharing Center

.

15

2.

Under

Change your networking settings

, click

Set up a new connection or network

.

3.

In the

Set Up a Connection a Network

window, select

Connect to the Internet

and click

Next

.

16

4.

Click

Broadband (PPPoE)

.

5.

In

User name

and

Password

, enter the dial-up connection account name and password

provided by your ISP. In

Connection name

, name the dial-up connection. Select or deselect

Allow other people to use this connection

. Then click

Connect

.

17

6.

Return to the

Network and Sharing Center

page. Click

Change adapter settings

. Right-

click the icon for the dial-up connection you just set up and choose

Create Shortcut

from the

shortcut menu. In the displayed dialog box, click

Yes

.

On Windows XP

1.

Choose

Start

>

Control Panel

>

Network and Internet Connections

>

Network

Connections

.

2.

Under

Network Tasks

, click

Create a New Connection

.