19216811.liveIndicator
Status
Description
Blinking
The HG532 is attempting to set up a wireless
connection with a wireless client (such as a PC on
which a wireless network adapter is installed) through
the WPS function.
This state lasts no more than 120s.
On
A wireless connection is set up between the HG532
and a wireless client through the WPS function.
This state lasts 300s.
WPS
Off
The WPS function is disabled.
Blinking
Data is being transmitted through the Ethernet
interface.
On
The Ethernet connection is set up.
LAN1 – LAN4
Off
The Ethernet connection is not set up.
Blinking
Data is being transmitted on the USB port.
On
The USB port is connected.
USB
Off
The USB port is not connected.
7.2
Interfaces and Buttons
Interface or Button
Description
POWER
It is used to connect the power adapter.
USB
It is used to connect the USB device.
LAN1 – LAN4
It is used to connect to the Ethernet interface on the
computer.
RESET
You can press and hold the RESET button for over six
seconds to restore the default settings of the HG532.
Note
After you restore the default settings, your customized data is lost.
Therefore, use this function with caution.
ADSL
It is used to connect to the MODEM interface on the
splitter.
WPS
It is used to set up a wireless connection between the
HG532 and a wireless terminal easily and safely.
21