1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG532a
    5. /
  5. 3
Page 11 / 29 Scroll up to view Page 6 - 10
#
#
#
1
3
4
5
PHONE
LINE
MODEM
2
POWER
LAN4
LAN3
LAN2
LAN1
USB
RESET
ADSL
1
7
6
5
7
8
1. Telephone jack
on the wall
2. Splitter
3. Power adapter
4. Computer
5. Telephone
6. Fax machine
7. Microfilter
8. T connector
2.4
Getting Started
Press down the ON/OFF button on the side of the HG532 to power on the HG532.
After you power on the HG532, the POWER indicators turns on and the ADSL
indicator blinks (for less than three minutes), which indicates that the HG532 is being
activated. After the ADSL indicator blinking, the POWER and ADSL indicators keep
solid on, which indicates that the HG532 is working properly.
6
Page 12 / 29
3
Setting the Network-Access Parameters
The HG532 supports ADSL2+ uplink and High-Speed Packet Access (HSPA) uplink
through Huawei HSPA data card. Realizes dynamic mutual backup of voice and data
services through the DSL link and HSPA link.
3.1
Configuring the HSPA uplink
When the HG532 is working through Huawei HSPA data card, you need to install the
Huawei HSPA data card on the HG532 so that your PC can connect to the Internet
through HSPA uplink. To create a HSPA uplink connection, do as follows:
Step 1
Log in to the Web-based configuration utility.
1.
Launch the Internet Explorer on your computer. Enter
in the address bar, and then press
Enter
.
2.
In the displayed dialog box, enter the user name and the password, and
then click
Login
.
By default, both the user name and the password are
admin
. After the user
name and the password are verified, you can access the Web-based
configuration utility.
Step 2
Click
Basic
>
WAN
in the navigation tree to display the
WAN Connection
Page.
Step 3
Click the connection whose access type is UMTS.
Step 4
Select
Enable
for
WAN connection
.
Step 5
Enter the APN and the Dial number that are provided by the network operator
in the
APN
text box and the
Dial number
text box.
Step 6
Enter the user name and password in the
User name
and
Password
text
boxes that you can configure.
Step 7
Click the
Submit
button to finish the UMTS settings.
If you want to verify the PIN code of your SIM card, then do as follows:
Step 1
Click
Advanced
>
PIN
in the navigation tree to display the
PIN
Page.
Step 2
Enter the original PIN number in the
PIN
text box.
Step 3
Click the
Submit
button to finish the settings on the
PIN
Page.
Use the default values for the other parameters. In general, they do not
need to be configured.
7
Page 13 / 29
3.2
Configuring the ADSL uplink
By configuring the HG532 and your computer, you can choose any of the following
methods to surf the Internet:
z
Accessing the Network Through the Embedded PPP Dial-Up Software on the
HG532
z
Accessing the Network Through the PPP Dial-Up Software on Your Computer
Accessing the Network Through the Embedded PPP
Dial-Up Software on the HG532
If you select this method for accessing the network, the HG532 starts to set up a dial-up
connection automatically after the startup. You can access the network after you power
on your computer. You do not need to install any special dial-up software on your
computer or perform dial-up operations on your computer. To configure the HG532 and
your computer for the network access, do as follows:
Step 1
Verify the HG532 and the PC have connected properly, and the PC has
obtained the IP address.
Step 2
Log in to the Web-based configuration utility of the HG532.
Step 3
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
WAN
.
2.
Select a PVC from the connection list.
3.
Select
Route
from the
Connection mode
drop-down combo box.
4.
Enter the VPI and VCI parameters that are provided by the network
operator in the
VPI/VCI
text boxes.
5.
Select
PPPoE
from the
Connection typ
e drop-down combo box.
6.
Enter the
user name
and
password
that are provided by the network
operator in the Username and Password text boxes, keep the default
settings of other parameters.
7.
Click
Submit
.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer once only. The next time
when you power on your computer, you can surf the Internet without any configuration.
Accessing the Network Through the PPP Dial-Up
Software on Your Computer
If you select this method for accessing the network, you need to install and configure
the dial-up software on your computer. In addition, you need to perform dial-up
8
Page 14 / 29
operations on your computer upon each startup. To configure the HG532 and your
computer for the network access, do as follows:
Step 1
Set the working mode of the HG532 to
Bridge
.
1.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
WAN
.
2.
Select a PVC from the connection list.
3.
Select
Bridge
from the
Connection mode
drop-down combo box.
4.
Click
Submit
.
Step 2
Install and configure the PPP dial-up software on your computer.
The PPP dial-up software is pre-installed on certain computer operating
systems. To create a dial-up connection, do as follows (taking the Windows
XP operating system as an example):
1.
Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2.
Click
Create a new connection
in
Network Tasks
to display the
New
Connection Wizard
window, and then click
Next
.
3.
Select
Connect to the Internet
, and then click
Next
.
4.
Select
Set up my connection manually
, and then click
Next
.
5.
Select
Connect using a broadband connection that requires a user
name and password
, and then click
Next
.
6.
Enter the name (as desired) of the dial-up connection in
ISP Name
, and
then click
Next
.
7.
Select
Anyone's use
or
My use only
, and then click
Next
.
8.
Enter the user name and password provided by the network operator and
used for the dial-up connection, and then click
Next
.
9.
Select
Add a shortcut to this connection to my desktop
, and then click
Finish
.
An icon for the dial-up connection is displayed on the desktop of your computer.
You need to perform the preceding operations only once for creating a network
connection. After the network connection is created, to access the network,
double-click the icon for the dial-up connection, and then click
Connect
in the
displayed dialog box.
9
Page 15 / 29
4
Configuring
the
Wireless
Network
Connection
If a wireless network adapter is installed on your computer, you can connect you
computer to the HG532 through a wireless connection.
The hardware installation methods and driver installation methods of
wireless network adapters provided by different companies vary from
each other. For details, see the installation guide provided by the
wireless network adapter provider.
Setting Up a Wireless Connection Through the WPS
Button
The HG532 supports the Wi-Fi Protected Setup (WPS) function. If your network
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG532 quickly. To set up a wireless
connection, do as follows:
Step 1
Enable the wireless network function, and set the wireless network name and
access password of the HG532, do as follows (taking the authentication type
WPA-PSK as an example):
1.
Log in to the Web-based configuration utility of the HG532.
2.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
WLAN
.
3.
Select the
Enable
WLAN
option.
4.
Enter a wireless network name in the
SSID
text box.
5.
Select
WPA-PSK
from the
Security
drop-down combo box.
6.
Enter an access password in the
WPA pre-shared key
text box.
7.
Select
AES
from the
WPA encryption
drop-down combo box.
8.
Click
Submit
to save the settings.
Step 2
Press the WPS button of the HG532 to enable the HG532 to enter the WPS
negotiation state.
Step 3
Enable the WPS negotiation function of the wireless network adapter on your
PC within two minutes, and then wait for a moment (typically 10s and at most
120s).
The WPS indicator of the HG532 becomes on from the blinking state, indicating that
the HG532 is connected to your PC through the WLAN. This state lasts 300s. Then the
WPS indicator turns off.
10

Rate

4 / 5 based on 1 vote.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top