1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. EchoLife-HG8247
    5. /
  5. 67
Page 331 / 364 Scroll up to view Page 326 - 330
5.6.2 Static Route Configuration
1.
In the navigation tree on the left, choose
Route
>
Static Route Configuration
. In the pane
on the right, click
New
. In the dialog box that is displayed, set the parameters related to the
static route, as shown in
Figure 5-23
.
Figure 5-23
Static Route Configuration
2.
Click
Apply
to apply the configuration.
Table 5-8
describes the parameters related to the static route.
Table 5-8
Parameters related to the static route
Parameter
Description
Destination Network
Address
Indicates the destination IP address of the static route.
Subnet Mask
Indicates the subnet mask of the static route.
Gateway IP Address
Indicates the gateway IP address of the static route.
Interface
Indicates the WAN interface that the route travels through.
5.6.3 Policy Route Configuration
1.
In the navigation tree on the left, choose
Route
>
Policy Route Configuration
. In the pane
on the right, click
New
. In the dialog box that is displayed, set the parameters related to the
policy route, as shown in
Figure 5-24
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
323
Page 332 / 364
Figure 5-24
Policy Route Configuration
2.
Click
Apply
to apply the configuration.
5.7 Forward Rules
This topic describes how to configure the DMZ, port mapping, and port trigger through the Web
page.
5.7.1 DMZ Configuration
1.
In the navigation tree on the left, choose
Forward Rules
>
DMZ Configuration
. In the
pane on the right, click
New
. In the dialog box that is displayed, set the parameters related
to the DMZ, as shown in
Figure 5-25
.
Figure 5-25
DMZ Configuration
2.
Click
Apply
to apply the configuration.
The demilitarized zone (DMZ) is a technology that enables the ONT to forward all received
packets through a specified internal server. The technology enables a computer in the LAN to
be completely exposed to all users on the Internet or enables the mutual communication without
restrictions between a host with a specified IP address and other users or other servers on the
Internet. In this way, many applications can run on the host with the specified IP address. The
host with the specified IP address receives all connections and files that can be identified.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
324
Page 333 / 364
CAUTION
If the LAN-side device does not provide website service or other network services, do not set
the device to a DMZ host because all ports of a DMZ host are opened to the Internet.
Table 5-9
describes the parameters related to the DMZ.
Table 5-9
Parameters related to the DMZ
Parameter
Description
Interface Name
Indicates the name of the WAN interface. If the WAN interface
is not in the port mapping table, the application requests from
the WAN connection are directly forwarded to the host in the
DMZ.
Host Address
Indicates the IP address of the DMZ host.
Enable DMZ
Indicates whether to enable the DMZ.
5.7.2 PortMapping Configuration
1.
In the navigation tree on the left, choose
Forward Rules
>
PortMapping
Configuration
. In the pane on the right, click
New
. In the dialog box that is displayed, set
the parameters related to port mapping, as shown in
Figure 5-26
.
Figure 5-26
PortMapping Configuration
2.
Click
Apply
to apply the configuration.
Port mapping indicates that the Intranet server is allowed to be open to the Extranet (for example,
the Intranet provides the Extranet with a WWW server or FTP server). Port mapping is to map
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
325
Page 334 / 364
the Intranet host IP address and port ID to Extranet IP address and corresponding port ID so that
users from Extranets can access the Intranet server. With port mapping, the users cannot see the
Intranet IP address and they see the Extranet IP address.
Table 5-10
describes the parameters related to port mapping.
Table 5-10
Parameters related to port mapping
Parameter
Description
Interface
Indicates the name of the WAN interface where port mapping is
enabled.
Protocol
Indicates the protocol type of port mapping packet, which may
be TCP, UDP, or TCP/UDP.
External Start Port
Indicates the destination start port of the external data packet.
External End Port
Indicates the destination end port of the external data packet.
Internal Start Port
Indicates the internal destination start port of the port mapping
packet.
Internal End Port
Indicates the internal destination end port of the port mapping
packet.
External Source Start Port
Indicates the source start port of the external data packet.
External Source End Port
Indicates the source end port of the external data packet.
Internal Host
Indicates the IP address of the host to which the port is mapped.
External Source IP
Address
Indicates the source IP address of the external data packet.
Mapping Name
Indicates the name of the port mapping rule.
Enable PortMapping
Indicates whether to enable port mapping.
5.7.3 PortTrigger Configuration
1.
In the navigation tree on the left, choose
Forward Rules
>
PortTrigger Configuration
.
In the pane on the right, click
New
. In the dialog box that is displayed, set the parameters
related to the port trigger, as shown in
Figure 5-27
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
326
Page 335 / 364
Figure 5-27
PortTrigger Configuration
2.
Click
Apply
to apply the configuration.
The port trigger indicates that a specific Extranet port is automatically enabled when a
corresponding Intranet port sends a packet and the packet is mapped to the Intranet port on the
host.A specific mapping packet is sent from the ONT through the Intranet so that specific packets
of the Extranet can be mapped to the corresponding host. A specified port on the gateway firewall
is open to some applications for remote access. The port trigger can dynamically enable the open
port of the firewall.
Table 5-11
describes the parameters related to the port trigger.
Table 5-11
Parameters related to the port trigger
Parameter
Description
Interface
Indicates the name of the WAN interface where the port trigger
is enabled.
Trigger Protocol
Indicates the protocol type of the port trigger packet, which may
be TCP, UDP, or TCP/UDP.
Open Protocol
Indicates the protocol type of the open data packet.
Trigger Start Port
Indicates the destination start port of the port trigger packet.
Trigger End Port
Indicates the destination end port of the port trigger packet.
Open Start Port
Indicates the destination start port of the open packet.
Open End Port
Indicates the destination end port of the open packet.
Enable
Indicates whether to enable the port trigger.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
327

Rate

3.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top