Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 346 / 364 Scroll up to view Page 341 - 345

Figure 5-39

Interface Basic Parameters Configuration - H.248 protocol

b.

Configured the User Basic Parameters.

Figure 5-40

User Basic Parameters Configuration - H.248 protocol

2.

Click

Apply

to apply the configuration.

Table 5-14

describes parameters used for configuring a VoIP interface based on the H.248

protocol.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

338

Page 347 / 364

Table 5-14

Parameters used for configuring a VoIP interface based on the H.248 protocol

Parameter

Description

Primary Server

MGC Address

Indicates the IP address (provided by the ISP) of the primary

MGC server.

MGC Port

Indicates the ID (provided by the ISP) of the port used for

communication between the primary MGC server and the

VoIP terminal. The ID ranges from 1 to 65535 and the default

ID is 2944.

Secondary Server

MGC Address

Indicates the IP address (provided by the ISP) of the

secondary MGC server.

MGC Port

Indicates the ID (provided by the ISP) of the port used for

communication between the secondary MGC server and the

VoIP terminal. The ID ranges from 1 to 65535 and the default

ID is 2944.

General

MG Domain

Fill the domain name when

Register Format

is set to

DomainName

, such as user.huawei.com.

MG Port

Indicates the ID of the local port on the ONT. The ID ranges

from 1 to 65535 and the default ID is 2944.

Device Name

Fill the device name when

Register Format

is set to

DeviceName

.

MID Format

Indicates the MG registration format. It can be the MG

domain name, IP address, or device name. The MG register

format must be the same as the register format provided by

the ISP.

Digitmap Match Mode

Indicates the digitmap matching mode, including Min and

Max.

l

Min: If the dialed character string matches a digitmap

scheme, the system immediately reports the number to

the softswitches.

l

Max: If the dialed character string matches a digitmap

scheme, the system does not immediately report the

number to the softswitches but starts the short timer. If a

user does not continue dialing digits, the system reports

the number to the softswitches after the short timer times

out; if the user continues dialing digits and the number

matches the long digitmap, the system reports the number

that matches the digitmap to the softswitches.

RTP TID Prefix

Indicates the prefix of the ephemeral termination. The default

prefix on Huawei softswitches is A100.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

339

Page 348 / 364

Parameter

Description

Start Number of RTP

TID

Indicates the start number of the suffix of the ephemeral

termination. The default value is 0.

Width of RTP TID

Number

Indicates the length of the suffix of the ephemeral

termination. The default value is 6.

Signaling Port

Indicates the signaling WAN port used for connecting the

VoIP terminal to the MGC server.

Media Port

Indicates the WAN port of the voice media streams. When

the name of the media port is empty, it indicates that the name

of the media port is the same as that of the signaling port.

Region

Indicates the country code.

Advanced Interface configuration

Fax Transmode

Indicates the fax mode, including pass-through and T.38.

l

Pass-through: The MG encodes the fax signals

transmitted by a fax machine according to the voice codec

(G.711), and then coverts such signals into the RTP data

packets for real-time transmission over an IP network.

l

T.38: The MG, through ITU-T T.38, converts the T.30-

compliant fax signals transmitted by a fax machine into

the T.38 packets for transmission over an IP bearer

network.

Fax Switchmode

Indicates the fax switching mode, including negotiation and

self-switch. The fax switching mode is selected according to

the customer requirements.

Profile Index

Indicates the control point parameters. Such parameters are

selected according to the softswitch. Generally, the default

settings are adopted.

Software Parameters

Indicates the software parameters. Such parameters are

selected according to the softswitch. Generally, the default

settings are adopted.

Start Negotiate Version

Indicates the start version of the H.248 protocol for

negotiation. It is selected according to the softswitch. The

value range is 0 to 3, and the default value is 2.

l

0: Indicates that the negotiation is based on the profile

parameters.

l

1-3: Indicates the start version of the H.248 protocol for

negotiation.

Enable Echo

Cancellation

Enables or disables echo cancellation. By default, echo

cancellation is enabled.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

340

Page 349 / 364

5.9.2 VoIP User Configuration

l

VoIP User Configuration - SIP protocol

1.

In the navigation tree on the left, choose

Voice

>

VoIP User Configuration

. In the

pane on the right, you can configure parameters of a VoIP user, including the register

user name, authentication user name, password, and associated POTS, as shown in

Figure 5-41

.

Figure 5-41

VoIP User Configuration - SIP protocol

2.

Click

Apply

to apply the configuration.

Table 5-15

describes parameters used for configuring a VoIP user based on the SIP

protocol.

Table 5-15

Parameters used for configuring a VoIP user based on the SIP protocol

Parameter

Description

Register User Name

Indicates the telephone number of a voice user.

Enable

Indicates whether to enable a voice user.

Auth User Name

Indicates the authentication user name of a voice user.

Password

Indicates the authentication password of a voice user.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

341

Page 350 / 364

Parameter

Description

Associated POTS

Indicates the POTS port associated with a voice user.

l

VoIP User Configuration - H.248 Protocol

1.

In the navigation tree on the left, choose

Voice

>

VoIP User Configuration

. In the

pane on the right, you can configure the line name and associated POTS, as shown in

Figure 5-42

.

Figure 5-42

VoIP User Configuration - H.248 Protocol

2.

Click

Apply

to apply the configuration.

Table 5-16

describes parameters used for configuring a VoIP user based on the H.248

protocol.

Table 5-16

Parameters used for configuring a VoIP user based on the H.248 protocol.

Parameter

Description

Line Name

Indicates the termination ID of a voice user. It must be

consistent with the MG termination ID on the MGC.

Associated POTS

Indicates the POTS port associated with a voice user.

Enable

Indicates whether to enable a voice user.

5.10 System Tools

This topic describes how to use the system tools on the Web page, including using the tools to

restart the device, restore the default configuration, and conduct the test.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

5 Web Page Reference

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

342

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share