1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. EchoLife-HG8247
    5. /
  5. 64
Page 316 / 364 Scroll up to view Page 311 - 315
Parameter
Description
Service List
Indicates the service type of the WAN
interface. It can be set to TR069,
INTERNET, TR069_INTERNET, VOIP,
TR069_VOIP, VOIP_INTERNET, or
TR069_VOIP_INTERNET.
VLAN ID
Indicates the VLAN ID. It ranges from 1 to
4094.
The VLAN ID must be the same as the
CVLAN ID on the OLT.
802.1p
Indicates the 802.1p value. It ranges from
0 to 7.
IP Acquisition Mode
Indicates the mode of obtaining an IP
address on the ONT. It can be set to DHCP,
static, or PPPoE.
l
In DHCP mode, the IP address is
dynamically obtained.
l
In static mode, the IP address is set
statically. You need to enter the IP
address, subnet mask, IP addresses of
the active and standby DNS servers,
and default gateway.
l
In PPPoE mode, you need to enter the
user name and password.
NAT
Indicates whether to enable the NAT
function.
Vendor ID
Set the option 60 field on the DHCP client.
The IP address can be obtained from the
DHCP server only when the option 60 field
is the same as the setting on the upper-layer
DHCP server. When
IP Acquisition
Mode
is set to
DHCP
, this parameter is
configurable.
Binding options
Used to bind the WAN interface to the
LAN port or to the wireless SSID.
NOTE
Before setting the binding options, set the work
mode of the LAN port or the wireless SSID. The
binding options can be set only after the work
mode or wireless SSID is successfully set. For
details, see
5.3.1 LAN Port Work Mode
and
5.4.1 WLAN Configuration
.
l
WAN Configuration - bridge
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
308
Page 317 / 364
1.
In the navigation tree on the left, choose
WAN
>
WAN Configuration
. In the pane
on the right, click
New
. In the dialog box that is displayed, set
Mode
to
Bridge
, as
shown in
Figure 5-12
.
Figure 5-12
WAN Configuration - bridge
2.
Click
Apply
to apply the configuration.
Table 5-2
describes the parameters related to the WAN in bridge mode.
Table 5-2
Parameters related to the WAN in bridge mode
Parameter
Description
Enable
Indicates whether to enable the WAN
connection.
Service List
Indicates the service type of the WAN
interface. It is always set to INTERNET.
VLAN ID
Indicates the VLAN ID. It ranges from 1 to
4094.
The VLAN ID must be the same as the
CVLAN ID on the OLT.
802.1p
Indicates the 802.1p value. It ranges from
0 to 7.
MultiCast VLAN ID
The multicast VLAN ID ranges from 1 to
4094.
The multicast VLAN ID must be the same
as the multicast VLAN ID on the OLT.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
309
Page 318 / 364
Parameter
Description
Bridge Type
It can be set to IP or PPPoE.
Binding options
Used to bind the WAN interface to the
LAN port or to the wireless SSID.
NOTE
Before setting the binding options, set the work
mode of the LAN port or the wireless SSID. The
binding options can be set only after the work
mode or wireless SSID is successfully set. For
details, see
5.3.1 LAN Port Work Mode
and
5.4.1 WLAN Configuration
.
NOTE
l
WAN in route mode: The ONT functions as a gateway. The IP address of the ONT can be obtained
through DHCP, Static, or PPPoE. The IP address of the PC connected to the ONT can be obtained from
the DHCP address pool of the ONT or can be set manually.
l
WAN in bridge mode: The ONT functions as a relay and does not process data. The ONT does not
obtain the IP address allocated by the upper-layer device and it does not allow manual configuration
of a static IP address. The IP address of the device connected to the ONT can be obtained through
DHCP, PPPoE, or static.
l
In the case of the DHCP mode, you need to set the DHCP relay. After configuration is complete,
the user-side IP address is obtained from the upper-layer device. For the detailed procedure, see
5.3.3 DHCP Server Configuration
.
l
In the case of the PPPoE mode, the user-side IP address is obtained through PPPoE authentication
of the upper-layer device.
5.3 LAN
This topic describes how to set the working mode of the LAN port, the LAN host, and the DHCP
server through the Web page.
5.3.1 LAN Port Work Mode
1.
In the navigation tree on the left, choose
LAN
>
LAN Port Work Mode
. In the pane on
the right, determine whether the LAN port works in layer 3 mode, as shown in
Figure
5-13
.
Figure 5-13
LAN Port Work Mode
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
310
Page 319 / 364
NOTE
If the check box corresponding to the LAN port is selected, it indicates that the LAN port works in
layer 3 mode, that is, the gateway mode; if the check box corresponding to the LAN port is deselected,
it indicates that the LAN port works in layer 2 mode, that is, the bridge mode.
By default, the check boxes corresponding to all LAN ports are deselected, that is, all LAN ports
work in layer 2 mode.
2.
Click
Apply
to apply the configuration.
5.3.2 LAN Host Configuration
1.
In the navigation tree on the left, choose
LAN
>
LAN Host Configuration
. In the pane on
the right, set the management IP address and subnet mask of the LAN host, as shown in
Figure 5-14
.
Figure 5-14
LAN Host Configuration
NOTE
The IP address of the device connected to the LAN port must be in the same subnet as the management
IP address. In this way, you can access an ONT through the Web page and perform query and
management. You can manually set the IP address of the device connected to the LAN port to be on
the same network segment as the management IP address, or start the DHCP server to set the IP
address in the DHCP address pool to be on the same network segment as the management IP address.
For details, see
5.3.3 DHCP Server Configuration
.
2.
Click
Apply
to apply the configuration.
5.3.3 DHCP Server Configuration
1.
In the navigation tree on the left, choose
LAN
>
DHCP Server Configuration
. In the pane
on the right, you can configure the LAN side DHCP address pool for the ONT that functions
as a gateway. After the configuration, the PC connected to the LAN port can automatically
obtain an IP address from the address pool, as shown in
Figure 5-15
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
311
Page 320 / 364
Figure 5-15
DHCP Server Configuration
2.
Click
Apply
to apply the configuration.
Table 5-3
describes the parameters related to the DHCP server.
Table 5-3
Parameters related to the DHCP server
Parameter
Description
Enable primary DHCP server
Indicates whether to enable the primary
DHCP server. If the check box is selected,
you can set the primary DHCP server.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
312

Rate

3.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top