Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 296 / 364 Scroll up to view Page 291 - 295

Figure 4-9

Querying the status legends of a POTS port

----End

4.5.3 Querying the Status of a VoIP User

This topic describes how to verify VoIP service status by querying registration and calling states

of the VoIP user on the NMS.

Prerequisite

l

The user is a user with the operator authority or higher.

l

The OLT and the NMS communicate with each other properly.

l

The NMS is able to discover an online ONT and VoIP service parameters are configured.

Procedure

Step 1

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-click the target

OLT, or select the target OLT, right-click, and choose

NE Explorer

.

Step 2

In the navigation tree, choose

GPON

>

GPON Management

.

Step 3

In the window on the right, choose

GPON ONU

.

Step 4

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU records.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

288

Page 297 / 364

Step 5

Select a required record from the ONT list, and then click the

POTS User

tab in the lower pane.

Step 6

View the user registration states in column

Status

and the user calling states in column

Call

Status

, as shown in the following figure.

Figure 4-10

Querying the status of a VoIP user

NOTE

The registration states and calling states are listed as follows:

l

Registration states include

Up

,

Initializing

,

Registering

,

Unregistering

,

Error

,

Testing

,

Quiescent

, and

Disabled

.

l

Calling states include

Idle

,

Calling

,

Ringing

,

Connecting

, and

InCall

.

----End

4.5.4 Querying and Deleting VoIP Statistics

VoIP statistics include RTP statistics and calling statistics. This topic describes how to query

and delete VoIP statistics.

Prerequisite

l

The user is a user with the operator authority or higher.

l

The OLT and the NMS communicate with each other properly.

l

The NMS is able to discover an online ONT and VoIP service parameters are configured.

Context

To query accurate VoIP statistics, delete the original VoIP statistics first.

Procedure

Step 1

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-click the target

OLT, or select the target OLT, right-click, and choose

NE Explorer

.

Step 2

In the navigation tree, choose

GPON

>

GPON Management

.

Step 3

In the window on the right, choose

GPON ONU

.

Step 4

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU records.

Step 5

Select a required record from the ONT list, and then click the

POTS User

tab in the lower pane.

Step 6

Query VoIP statistics.

1.

Select a record from the list, right-click, and then choose

Performance Statistic

.

2.

In the dialog box that is displayed, view the VoIP statistics, as shown in the following

figure.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

289

Page 298 / 364

Figure 4-11

Querying VoIP statistics

Step 7

Delete VoIP statistics.

1.

Select a record from the list, right-click, and then choose

Clear Performance Statistic

.

2.

In the dialog box that is displayed, click

Yes

.

3.

Perform step 2 to check whether VoIP statistics are deleted.

----End

4.5.5 Caller Emulation Test

The caller emulation test verifies the basic calling services and preliminarily locates a fault.

Prerequisite

l

The OLT and the NMS communicate with each other properly.

l

The NMS is able to discover an online ONT and VoIP service parameters are configured.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

290

Page 299 / 364

l

The user connected to the POTS port that is enabled with caller emulation successfully

registers with the softswitch.

Context

The call emulation test verifies the basic calling services during service provisioning, and works

with the POTS line test to preliminarily locate a fault.

There are three types of call emulation tests: caller emulation test, callee emulation test, and

automatic emulation test. The call emulation test is irrelevant to protocols for the upstream

transmission. That is, it is applicable to SIP and H.248.

After the POTS port is configured with parameters for the caller emulation test and is enabled

with the caller emulation test, the offhook and dialing emulation can be performed on the POTS

port. If the called number is correct and the callee is free, the phone of the caller is ringing. After

picking up the phone, the callee hears his/her own voice.

Impact on the System

After a POTS port is enabled with the caller emulation test, services carried on the POTS port

are interrupted. These services will be recovered after caller emulation is complete.

Procedure

Step 1

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-click the target

OLT, or select the target OLT, right-click, and choose

NE Explorer

.

Step 2

In the navigation tree, choose

GPON

>

GPON Management

.

Step 3

In the window on the right, choose

GPON ONU

.

Step 4

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU records.

Step 5

Select a required record from the ONT list, and then click the

The Ont's UNI Port Info

tab in

the lower pane.

Step 6

Select a record from the list whose

UNI Type

is

Pots

, right-click, and choose

Caller Emulation

Test

from the shortcut menu.

Step 7

In the dialog box that is displayed, set

Callee Number

, as shown in the following figure.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

291

Page 300 / 364

Figure 4-12

Caller emulation test

Step 8

Click

Start

.

----End

Result

After the caller emulation test is enabled, if the phone on the callee side (whose number is dialed

by the emulated caller) rings and the ringing is audible, the signaling connection is successful.

A test engineer answers the phone, and if the test engineer's voice can be heard on the receiver,

the media channel is available.

4.5.6 Callee Emulation Test

The callee emulation test verifies the basic calling services and preliminarily locates a fault.

Prerequisite

l

The OLT and the NMS communicate with each other properly.

l

The NMS is able to discover an online ONT and VoIP service parameters are configured.

l

The user connected to the POTS port that is enabled with callee emulation successfully

registers with the softswitch.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

292

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share