Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 291 / 364 Scroll up to view Page 286 - 290

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN Connection

. Select

WAN Connection

, right-click, and choose

Add IP Connection

from the shortcut menu. Select

WAN IP Interface1

and add a static WAN interface.

l

Set

WAN Interface Name

, which identifies a WAN interface and can be specified freely.

l

Set

WAN Enable

to

enable

.

l

Set

Connection Type

to

IP_Routed

.

l

Set

Vlan ID

the same as the CVLAN ID of the traffic streams configured on the OLT.

l

Set

Addressing Type

to

Static

and set

IP Address

,

Subnet Mask

, and

Default Gateway

.

l

Set

Service Type

to

INTERNET

.

For details, see

Figure 4-5

.

Figure 4-5

Configuring static WAN parameters

Step 6

Enable the access rights on the WAN.

In the navigation tree, choose

Security

>

ACL Services

. On the right pane, set

HTTP WAN

Enables

to

enable

.

For details, see

Figure 4-6

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

283

Page 292 / 364

Figure 4-6

Enabling the access rights on the WAN

----End

Result

Enter the configured static IP address in the address bar of the Internet Explorer. The login Web

page is displayed. Enter the user name and password (the default user name is

telecomadmin

and the default password is

admintelecom

). The configuration page is displayed.

4.5 Maintenance and Troubleshooting on the NMS

This topic describes how to maintain and troubleshoot the ONT on the NMS.

4.5.1 PPPoE Dialup Emulation

After enabling PPPoE dialup emulation, you can emulate PPPoE dialup on the ONT and locate

faults.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

284

Page 293 / 364

Prerequisite

l

The user is a user with the operator authority or higher.

l

The OLT and the NMS communicate with each other properly.

l

PPPoE users are configured on the BRAS.

l

The NMS is able to discover an online ONT and data of the Internet access service is

configured.

Context

Currently, the mainstream access mode of broadband users is PPPoE dialup. In this mode, all

service packets are encapsulated in PPPoE packets and PPPoE dialup authentication is

terminated on the BRAS. The ONT is usually deployed on the edge of a network and resides

between PPPoE dialup users and the BRAS, connecting PPPoE users to the network.

With the PPPoE dialup emulation function enabled on the ONT, you can emulate PPPoE dialup

for testing and report collected test results to the NMS server. After analyzing the test result on

the NMS server, you can determine where a fault occurs, which is very useful for daily

maintenance and troubleshooting.

Procedure

Step 1

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-click the target

OLT, or select the target OLT, right-click, and choose

NE Explorer

.

Step 2

In the navigation tree, choose

GPON

>

GPON Management

.

Step 3

In the window on the right, choose

GPON ONU

.

Step 4

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU records.

Step 5

Select a record from the ONT list, right-click, and then choose

PPPoE Test

.

Step 6

In the dialog box that is displayed, set the related PPPoE emulation parameters, as shown in the

following figure.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

285

Page 294 / 364

Figure 4-7

PPPoE dialup emulation

Step 7

Click

Start

. After the test is complete, test results are displayed on the NMS.

----End

4.5.2 Querying the Physical State of a POTS Port

This topic describes how to verify whether a POTS port is in the normal state by querying the

physical state of the POTS port on the NMS.

Prerequisite

l

The user is a user with the operator authority or higher.

l

The OLT and the NMS communicate with each other properly.

l

The NMS is able to discover an online ONT and VoIP service parameters are configured.

Procedure

Step 1

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-click the target

OLT, or select the target OLT, right-click, and choose

NE Explorer

.

Step 2

In the navigation tree, choose

GPON

>

GPON Management

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

286

Page 295 / 364

Step 3

In the window on the right, choose

GPON ONU

.

Step 4

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU records.

Step 5

Select a required record from the ONT list, and then click the

The Ont's UNI Port Info

tab in

the lower pane.

Step 6

View the icons in column

Status

, as shown in the following figure.

Figure 4-8

Querying the physical state of a POTS port

For the icon meanings, right-click an icon, and choose

Lengend

from the shortcut menu, as

shown in the following figure.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

4 Maintenance and Troubleshooting

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

287

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share