Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 271 / 364 Scroll up to view Page 266 - 270

Step 5

Bind the SSID.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

>

1

>

WANIPConnection

>

1

>

X_HW_LANBIND

from the navigation tree. In the right pane, set

SSID1Enable

to

1

, indicating that the WAN interface is bound to SSID 1.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

263

Page 272 / 364

----End

Result

l

Layer 3 bridge Wi-Fi service: SSID radio signals can be searched on the PC. After the user

enter the authentication key and pass the authentication, the user can access the Internet.

l

Layer 3 route Wi-Fi service: SSID radio signals can be searched on the PC. After the user

enter the authentication key and pass the authentication, the PC can obtain the IP address

allocated by the DHCP IP address pool on the ONT. After the PPPoE dialup is successfully

performed on the ONT, the user can access the Internet.

NOTE

The security mode and encryption configured on a Wi-Fi terminal must be the same as those of an ONT. If you

cannot find the following encryption modes: TKIP&AES, and AES. The reason may lie in an old Wi-Fi driver

version. If so, replace the old version with a new one.

3.6 Operation Guide on the XML Configuration File

This topic describes how to issue the XML configuration files on the Web page and on the

U2000.

The ONT voice service and gateway involve a large amount of configuration information, most

of which is not defined in the OMCI protocol and cannot be configured on the Web page or the

U2000. Issuing the XML configuration file functions as a supplement to completing all ONT

configurations.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

264

Page 273 / 364

CAUTION

l

Web interface and the U2000 cannot use the same XML configuration file. The XML

configuration file of Web interface contains all configuration data, while the XML

configuration file of the U2000 contains only part of the configuration data.

l

H.248 and SIP can share the same XML configuration file, but the configurations involving

voice service need to be re-configured accordingly.

l

The XML configuration file is generally exported for modifying, and then imported back.

Configuration rolls back or even factory defaults are restored if an incorrect XML

configuration file is imported. When configuration parameters of an XML configuration file

need to be modified, please contact Huawei technical engineers for help.

3.6.1 Operation Guide on the XML Configuration File (on the Web

Page)

This topic describes how to issue the XML configuration file on the Web page.

Prerequisite

You have established the environment for logging in to the Web page for service configuration

and have successfully logged in to the Web page. For details, see

3.4.3 Locally Logging in to

the Web Interface

.

Procedure

Step 1

Export the XML configuration file.

1.

In the navigation tree, choose

System Tools

>

Configuration File

.

2.

In the details area, click

Download Configuration File

, as shown in the following figure.

Figure 3-10

Exporting the XML configuration file

3.

In the dialog box that is displayed, click

Save

to save the XML configuration file.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

265

Page 274 / 364

Step 2

Modify the XML configuration file.

NOTE

In the case of an initial deployment, use the XML configuration file released with software. Hence, the

operation in step 1 is not required.

1.

Open the XML configuration file downloaded in step 1 and find the parameters to be

modified.

2.

Modify the required parameters.

WARNING

Configuration will roll back or even factory defaults are restored if an incorrect XML

configuration file is issued. When configuration parameters need to be modified for an

XML configuration file, please contact Huawei technical engineers for help.

3.

Save the modified XML configuration file.

Step 3

Import the XML configuration file.

1.

In the navigation tree, choose

System Tools

>

Configuration File

.

2.

In the details area, click

Browse

. Then, choose the XML configuration file to be imported,

and click

Open

.

3.

In the details area, click

Upload Configuration File

, as shown in the following figure.

Figure 3-11

Importing the XML configuration file

4.

The configuration will take effect after the ONT restarts automatically.

----End

3.6.2 Operation Guide on the XML Configuration File (on the

U2000)

This topic describes how to issue the XML configuration files on the U2000.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

266

Page 275 / 364

Prerequisite

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

Enabling Layer 2 Service Channels Between an OLT and a

GPON ONT (on the OLT CLI)

.

Context

Issuing the XML configuration file on the U2000 applies to the following two typical scenarios:

l

Configuring an ONT

l

Configuring ONTs in batches

Procedure

l

Configure an ONT.

1.

Export the XML configuration file.

a.

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

b.

In the navigation tree, choose

GPON

>

GPON Management

.

c.

In the window on the right, choose

GPON ONU

.

d.

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

e.

Select a required record from the ONT list, right-click, and choose

Configure

Value-Added Service

from the shortcut menu.

f.

In the dialog box that is displayed, click

Export

to export the XML configuration

file, as shown in the following figure.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

267

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share