Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 266 / 364 Scroll up to view Page 261 - 265

Step 8

Click

OK

after the configuration.

----End

Result

l

User 1 with telephone number

88001234

can call user 2 with telephone number

88001235

, and the communication between them is normal. The communication is also

normal for user 2's calling user 1.

NOTE

The termination IDs of line 1 and line 2 configured on the MGC correspond to telephone numbers

88001234

and

88001235

respectively.

l

Check whether the voice communication between users using different ONTs is normal.

3.5.6 Configuring the Wi-Fi Access Service Through the U2560

This topic provides an example of how to configure the Wi-Fi access service through the TR-069

server.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

Enabling Layer 2 Service Channels Between an OLT and

a GPON ONT (on the OLT CLI)

.

l

The ONT is auto discovered on the U2560. For details, see

Commissioning Interoperation

Between the U2560 and the ONT Through the Web Page

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

258

Page 267 / 364

l

A portable computer with the Wi-Fi function must be available.

Context

The Wi-Fi wireless access service includes the Layer 3 bridge Wi-Fi service and the Layer 3

route Wi-Fi service.

l

Layer 3 Wi-Fi service: Search for the SSID is performed on the PC. After the user passes

the verification, the PPPoE auto dialup is performed on the PC. The IP address is allocated

by the upper-layer BRAS. The ONT is connected to the OLT and then to the upper-layer

network in the Layer 3 mode to provide the high-speed Internet access service.

l

Layer 3 route Wi-Fi service: Search for the SSID is performed on the PC. After the user

passes the verification, the PPPoE auto dialup is performed on the PC. The ONT is

connected to the OLT and then to the upper-layer network in the Layer 3 mode to provide

the high-speed Internet access service.

Every data change must be saved. You can click

Save

in a window to save data changes. If you

navigate to another node without saving data changes, a dialog box will be displayed prompting

you to save the data changes. In this case, click

YES

in the dialog box. New data will be

automatically applied to the ONTs after the data changes are saved.

CAUTION

When configuring services on the U2560, do not modify the WAN interface connecting the

U2560 and the ONT. Otherwise, the U2560 loses communication with the ONT.

Procedure

Step 1

Log in to the U2560 and choose

Subnet View

>

TR069 Subnet

from the navigation tree. In the

terminal list, right-click an ONT and choose

Tools

>

Configure in Real Time

from the shortcut

menu.

Step 2

In the

Configure in Real Time

dialog box, set

Root Node

to

Internet gateway device

.

Step 3

Configure the Wi-Fi parameters.

1.

Choose

InternetGatewayDevice

>

LANDevice

>

1

>

WLANConfiguration

>

1

from the

navigation tree. In the right pane, set the parameters as follows:

l

Set

Enable

to

1

, indicating that the WLAN service is enabled.

l

Set

RegulatoryDomain

to

CN

, indicating the country code of China.

l

Set

SSID

to

ChinaNet-huawei

.

l

Set

BeaconType

to

WPA

and

WPAEncryptionModes

to

TKIPandAESEncryption

, indicating that the encryption mode of the WPA is

TKIP&AES

.

l

Set

WPAAthenticationMode

to

PSKAuthentication

, indicating that the

authentication mode is

Pre-Shared Key

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

259

Page 268 / 364

2.

Choose

PreSharedKey

>

1

,

1

from the navigation tree. In the right pane, set

PreSharedKey

to

chinahuawei

, indicating that the WPA encryption key is

chinahuawei

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

260

Page 269 / 364

Step 4

Configure the parameters of the WAN interface.

l

Configure the parameters of the WAN interface – Route

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANPPPConnection

from the navigation tree. Click

Add

in the lower

left part. Choose the new

1

branch from the navigation tree. In the right pane, set the

parameters as follows:

–

Set

Enable

to

1

, indicating that the WAN connection is enabled.

–

Set

Connection Type

to

IP_Routed

, indicating that the connection type of the

WAN interface is in routing mode.

–

Set

NATEnable

to

1

, indicating that the NAT function is enabled.

–

Set

Username

to

iadtest@pppoe

and

Password

to

iadtest

, indicating that the

PPPoE user name is

iadtest@pppoe

and the password is

iadtest

.

–

Set

X_HW_SERVICELIST

to

INTERNET

, indicating that the service type of

the WAN interface is Internet.

–

Set

X_HW_VLAN

to

40

, indicating that the VLAN ID of the WAN interface is

40.

–

Set

X_HW_PRI

to

1

, indicating that the priority level of the WAN interface is 1.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

261

Page 270 / 364

NOTE

l

If the WAN interface obtains IP addresses in static or DHCP mode, choose

WANIPConnection

to set the parameters of the WAN interface.

l

If the WAN interface obtains IP addresses in PPPoE mode, choose

WANPPPConnection

to

set the parameters of the WAN interface.

l

Configure the parameters of the WAN interface – Bridge

1.

Choose

InternetGatewayDevice

>

WANDevice

>

1

>

WANConnectionDevice

from the navigation tree. Click

Add

in the lower left part to create an instance.

2.

Choose

2

>

WANPPPConnection

from the navigation tree. Click

Add

in the lower

left part. Choose the new

1

branch from the navigation tree. In the right pane, set the

parameters as follows:

–

Set

Enable

to

1

, indicating that the WAN connection is enabled.

–

Set

Connection Type

to

IP_Bridged

, indicating that the connection type of the

WAN interface is in bridge mode.

–

Set

X_HW_SERVICELIST

to

INTERNET

, indicating that the service type of

the WAN interface is Internet.

–

Set

X_HW_VLAN

to

40

, indicating that the VLAN ID of the WAN interface is

40.

–

Set

X_HW_PRI

to

1

, indicating that the priority level of the WAN interface is 1.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

262

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share