1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. EchoLife-HG8247
    5. /
  5. 48
Page 236 / 364 Scroll up to view Page 231 - 235
Step 6
Check the ONT connection status.
In the navigation tree, choose
Status
>
WAN Information
. In the right pane,
Status
is
Connected
and the obtained IP address is displayed at
IP
.
Step 7
Check the registration status of the voice user.
In the navigation tree, choose
Status
>
VoIP Information
. In the right pane,
User Status
is
Up
.
----End
Result
l
User 1 with telephone number
88001234
can call user 2 with telephone number
88001235
, and the communication between them is normal. The communication is also
normal for user 2's calling user 1.
NOTE
The termination IDs of line 1 and line 2 configured on the MGC correspond to telephone numbers
88001234
and
88001235
respectively.
l
Check whether the voice communication between users using different ONTs is normal.
3.4.7 Configuring the Wi-Fi Access Service on the Web Page
This topic provides an example of how to configure the Wi-Fi access service on the Web page.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
228
Page 237 / 364
Prerequisite
l
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
Enabling Layer 2 Service Channels Between an OLT and
a GPON ONT (on the OLT CLI)
.
l
You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see
3.4.3
Locally Logging in to the Web Interface
.
l
A portable computer with the Wi-Fi function must be available.
Context
The Wi-Fi wireless access service includes the Layer 3 bridge Wi-Fi service and the Layer 3
route Wi-Fi service.
l
Layer 3 Wi-Fi service: Search for the SSID is performed on the PC. After the user passes
the verification, the PPPoE auto dialup is performed on the PC. The IP address is allocated
by the upper-layer BRAS. The ONT is connected to the OLT and then to the upper-layer
network in the Layer 3 mode to provide the high-speed Internet access service.
l
Layer 3 route Wi-Fi service: Search for the SSID is performed on the PC. After the user
passes the verification, the PPPoE auto dialup is performed on the PC. The ONT is
connected to the OLT and then to the upper-layer network in the Layer 3 mode to provide
the high-speed Internet access service.
Procedure
l
Layer 3 bridge Wi-Fi service
1.
Configure the Wi-Fi parameters.
a.
In the navigation tree, choose
Wi-Fi
>
Wi-Fi Basic Configuration
.
b.
Select
Enable Wireless
to enable the Wi-Fi function. Then, set the parameters
as follows:
–
SSID: ChinaNet-huawei
–
Authentication Mode: WPA Pre-Shared Key
–
Encryption Mode: TKIP&AES
–
WPA PreSharedKey: chinahuawei
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
229
Page 238 / 364
c.
Click
Apply
to apply the configuration.
2.
Configure the parameters of the Layer 3 bridge WAN port.
a.
In the navigation tree, choose
WAN
>
WAN Configuration
.
b.
In the right pane, click
New
. In the dialog box that is displayed, configure
parameters of the WAN port as follows:
–
WAN Connection: Enable
–
Mode: Bridge
–
VLAN ID: 40 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
–
802.1p: 1
–
Bridge Type: PPPoE_Bridged
–
Binding options: SSID1
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
230
Page 239 / 364
NOTE
When you use Wi-Fi access service in the PPPoE mode, if DHCP is used, you need to set
Bridge Type
to
IP_Bridged
and enable the DHCP relay function. For procedure details, see
5.3.3 DHCP Server Configuration
.
c.
Click
Apply
to apply the configuration.
3.
Save the configuration.
Choose
System Tools
>
Configuration File
from the navigation tree. In the right
pane, click
Save Configuration
.
4.
Check the ONT connection status.
In the navigation tree, choose
Status
>
WAN Information
. In the right pane,
User
Status
is
Connected
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
231
Page 240 / 364
l
Layer 3 route Wi-Fi service
1.
Configure the Wi-Fi parameters.
a.
In the navigation tree, choose
Wi-Fi
>
Wi-Fi Basic Configuration
.
b.
Select
Enable Wireless
to enable the Wi-Fi function. Then, set the parameters
as follows:
–
SSID: ChinaNet-huawei
–
Authentication Mode: WPA Pre-Shared Key
–
Encryption Mode: TKIP&AES
–
WPA PreSharedKey: chinahuawei
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
232

Rate

3.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top