Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 221 / 364 Scroll up to view Page 216 - 220

tcont 4 dba-profile-id 40

gem add 1 eth tcont 1

gem add 2 eth tcont 2

gem add 3 eth tcont 3

gem add 4 eth tcont 4

mapping-mode vlan

gem mapping 1 1 vlan 10

gem mapping 2 2 vlan 20

gem mapping 3 3 vlan 40

gem mapping 4 4 vlan 50

commit

quit

ont-srvprofile gpon profile-id 10

ont-port eth 4 pots 2 catv 1

port vlan eth 1 10

commit

quit

interface gpon 0/1

port 1 ont-auto-find enable

display ont autofind 1

ont confirm 1 ontid 1 sn-auth 6877687714852900 omci ont-lineprofile-id 10 ont-

srvprofile-id 10

ont confirm 1 ontid 2 sn-auth 6877687714852901 omci ont-lineprofile-id 10 ont-

srvprofile-id 10

ont alarm-profile 1 1 profile-id 1

ont alarm-profile 1 2 profile-id 1

ont port native-vlan 1 1 eth 1 vlan 10

ont port native-vlan 1 2 eth 1 vlan 10

quit

traffic table ip index 8 cir 4096 priority 1 priority-policy tag-In-Package

traffic table ip index 9 cir off priority 6 priority-policy tag-In-Package

traffic table ip index 10 cir 6144 priority 1 priority-policy tag-In-Package

traffic table ip index 11 cir off priority 7 priority-policy tag-In-Package

service-port 1 vlan 100 gpon 0/1/1 ont 1 gemport 1 multi-service user-vlan 10 rx-

cttr 8 tx-cttr 8

service-port 2 vlan 100 gpon 0/1/1 ont 2 gemport 1 multi-service user-vlan 10 rx-

cttr 8 tx-cttr 8

service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-service user-vlan 20 rx-

cttr 9 tx-cttr 9

service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-service user-vlan 20 rx-

cttr 9 tx-cttr 9

service-port 5 vlan 400 gpon 0/1/1 ont 1 gemport 3 multi-service user-vlan 40 rx-

cttr 10 tx-cttr 10

service-port 6 vlan 400 gpon 0/1/1 ont 2 gemport 3 multi-service user-vlan 40 rx-

cttr 10 tx-cttr 10

service-port 7 vlan 500 gpon 0/1/1 ont 1 gemport 4 multi-service user-vlan 50 rx-

cttr 11 tx-cttr 11

service-port 8 vlan 500 gpon 0/1/1 ont 2 gemport 4 multi-service user-vlan 50 rx-

cttr 11 tx-cttr 11

queue-scheduler wrr 10 10 20 20 40 0 0 0

cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7

save

3.4.2 Data Plan

This topic plans the data in a unified manner for various example networks of connecting ONTs

in the FTTH GPON access mode. Subsequent examples are configured based on the following

data plan.

Table 3-12

shows the unified data plan for the HSI service, VoIP service and Wi-Fi service in

an FTTH network.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

213

Page 222 / 364

Table 3-12

Data plan for connecting ONTs in the FTTH GPON access mode

Configurat

ion Item

Data Item

Detailed Data

Remarks

WAN port

data

HSI service

(Layer 3

routing)

l

Service type: Internet

l

Connection mode: routing

l

VLAN ID: 10

l

IP address obtainment

mode: PPPoE (user name:

iadtest@pppoe, password:

iadtest)

l

802.1p: 1

l

NAT function: enable

l

Bound port: LAN1 (LAN1 is

a Layer 3 LAN)

l

For configuring HSI

service or Wi-Fi

service, Internet or a

combination

containing Internet

must be selected as the

service type. For

configuring VoIP

service, VoIP or a

combination

containing VoIP must

be selected as the

service type.

l

The VLAN ID of the

ONT must be the same

as the user-side VLAN

ID configured on the

OLT.

l

PPPoE must use the

same user name and

password as the upper-

layer BRAS.

l

The HSI service

involves the Layer 2,

Layer 3 bridge and

Layer 3 routing modes.

In the Layer 2 mode, all

configurations are

required only on the

OLT. The application

mode of the Layer 3

bridge mode is similar

to the Layer 2 mode. It

is recommended that

you use the Layer 2

mode.

l

The Wi-Fi service does

not support the Layer 2

mode.

VoIP service

l

Service type: VoIP

l

Connection mode: routing

l

VLAN ID: 20

l

IP address obtaining mode:

DHCP

l

802.1p: 6

Wi-Fi

service

(Layer 3

bridge)

l

Service type: Internet (not

configurable)

l

Connection mode: bridge

l

VLAN ID: 40

l

802.1p: 1

l

Bound port: SSID1

Wi-Fi

service

(Layer 3

routing)

l

Service type: Internet

l

Connection mode: routing

l

VLAN ID: 40

l

IP address Obtainment

mode: PPPoE (user name:

iadtest@pppoe, password:

iadtest)

l

802.1p: 1

l

NAT function: enable

l

Bound port: SSID1

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

214

Page 223 / 364

Configurat

ion Item

Data Item

Detailed Data

Remarks

VoIP service

data

SIP

parameters

l

IP address of the primary

server: 200.200.200.200

l

Port ID of the primary

server: 5060

l

Home domain name:

softx3000.huawei.com

l

Digitmap: x.S|x.# (Default)

l

User 1:

–

Phone number:

88001234

–

Authentication user

name:

[email protected]

uawei.com

–

Password: iadtest1

l

User 2:

–

Phone number:

88001235

–

Authentication user

name:

[email protected]

uawei.com

–

Password: iadtest2

The software version that

supports SIP is

V100R002C06.

H.248

parameters

l

Primary MGC address:

200.200.200.200

l

Primary MGC port: 2944

l

MID format: domain name

l

MG domain name:

6877687714852901

l

TID: A0 and A1

The software version that

supports H.248 is

V100R002C07.

Wi-Fi

service

SSID1

ChinaNet-huawei

-

Security

mode

WPA Pre-Shared Key

WPA

encryption

mode

l

TKIP&AES

l

Key: chinahuawei

3.4.3 Locally Logging in to the Web Interface

This topic describes the data plan and procedure for logging in to the Web configuration

interface.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

215

Page 224 / 364

Context

Before setting up the configuration environment, ensure that data information listed in

Table

3-13

is available.

Table 3-13

Data plan

Item

Description

User name and password

Default settings:

l

Administrator:

–

User name: telecomadmin

–

Password: admintelecom

l

Common user:

–

User name: root

–

Password: admin

LAN IP address and subnet mask

Default settings:

l

IP address: 192.168.100.1

l

Subnet mask: 255.255.255.0

IP address and subnet mask of the PC

Configure the IP address of the PC to be in

the same subnet as the LAN IP address of the

HG8010/HG8110/HG8240/HG8245/

HG8247/HG8447.

For example:

l

IP address: 192.168.100.100

l

Subnet mask: 255.255.255.0

Procedure

Step 1

Use a network cable to connect the LAN port of the HG8010/HG8110/HG8240/HG8245/

HG8247/HG8447 to a PC.

Step 2

Ensure that the Internet Explorer (IE) of the PC does not use the proxy server. The following

section considers IE 6.0 as an example to describe how to check whether the IE uses the proxy

server.

1.

Start the IE, and choose

ToolsInternet Options

from the main menu of the IE window.

Then, the

Internet Options

interface is displayed.

2.

In the

Internet Options

interface, click the

Connections

tab, and then click

LAN

settings

.

3.

In the

Proxy server

area, ensure that the

Use a proxy server for your LAN (These settings

will not apply to dial-up or VPN connections).

check box is not selected (that is, without

the "

√

" sign). If the check box is selected, deselect it, and then click

OK

.

Step 3

Set the IP address and subnet mask of the PC. For details, see

Table 3-13

.

Step 4

Log in to the Web configuration interface.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

216

Page 225 / 364

1.

Enter

http://192.168.100.1

in the address bar of IE (192.168.100.1 is the default IP address

of the HG8010/HG8110/HG8240/HG8245/HG8247/HG8447), and then press

Enter

to

display the login interface, as shown in

Figure 3-8

.

Figure 3-8

Login interface

2.

In the login interface, enter the use name and password, and select your preferred language.

For details about default settings of the user name and password, see

Table 3-13

. After the

password authentication is passed, the Web configuration interface is displayed.

----End

3.4.4 Configuring the Internet Access Service on the Web Page

This topic provides an example of how to configure the Internet access service on the Web page.

Prerequisite

l

The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT

commands. For details, see

Enabling Layer 2 Service Channels Between an OLT and

a GPON ONT (on the OLT CLI)

.

l

You have established the environment for logging in to the Web page for service

configuration and have successfully logged in to the Web page. For details, see

3.4.3

Locally Logging in to the Web Interface

.

l

The user-side PC must be connected with the LAN port of an ONT by using network cables.

Context

The Internet access service includes the Layer 2 Internet access service and Layer 3 Internal

access service.

l

Layer 2 Internet access service: The PPPoE dialup is performed on the PC. The IP address

is allocated by the upper-layer BRAS. The ONT is connected to the OLT and then to the

upper-layer network in the Layer 2 mode to provide the high-speed Internet access service.

l

Layer 3 Internet access service: The PPPoE auto dialup is performed on the ONT. The IP

address is allocated by the DHCP IP address pool on the ONT. The ONT is connected to

the OLT and then to the upper-layer network in the Layer 3 mode to provide the high-speed

Internet access service.

You do not need to configure the Layer 2 Internet access service on the ONT, but you need to

only enable the Layer 2 service channels between the OLT and ONT. This topic describes only

how to configure the Layer 3 Internet access service.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

217

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share