Page 131 / 364
Scroll up to view Page 126 - 130
e.
Click
OK
.
f.
In the information list, right-click the record and choose
Download to NE
from
the shortcut menu.
g.
In the dialog box that is displayed, select the required OLT and click
Next
. Then,
set
VLAN ID
to
1000
.
h.
Click
OK
.
6.
Configure a multicast user on the OLT side.
To enable user authentication, select
Enable Authorization
. To add a rights profile
and apply it to NEs, choose
Configuration
>
Access Profile Management
>
IGMP
Profile
from the main menu and click the
Right Profile
tab.
a.
Choose
Multicast
>
Multicast User
from the navigation tree.
b.
In the information list, right-click and choose
Add
from the shortcut menu.
c.
In the dialog box that is displayed, set the parameters.
–
Alias: IGMPUserA
–
Unlimited Band Width: selected
–
Select Service Port: service virtual port named
IGMP
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123
Page 132 / 364
d.
Click
Finish
.
e.
Select the multicast user, click the
User Multicast VLAN
tab in the lower pane,
right-click, and then choose
Add
from the shortcut menu.
f.
In the dialog box that is displayed, select the record where
Multicast VLAN
ID
is set to
1000
and click
OK
.
7.
Configure the value-added service profile of the ONT.
a.
From the main menu, choose
Configuration
>
Access Profile Management
. In
the navigation tree of the tab page that is displayed, choose
PON Profile
>
ONT
VAS Profile
.
b.
On the
ONT VAS Profile
tab page, right-click, and choose
Add
from the shortcut
menu.
c.
In the dialog box that is displayed, set relevant parameters.
–
Profile Name: ONT-IPTV
–
Vendor ID: HWTC(2011)
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
124
Page 133 / 364
–
Terminal Type: 247
–
Version: V1R002C06-Later
d.
Configure the working mode of a LAN port.
a.
In the navigation tree, choose
LANDevice
>
LAN Interface 1
>
LAN
Interface
.
b.
Select
LAN Interface
, right-click, and choose
Add
. Add
LAN Ethernet
Configuration 2
and
LAN Ethernet Configuration 3
.
c.
Select
LAN Ethernet Configuration 3
and set
LAN Port two three-port
enable
to
enable
. This indicates that LAN 3 works in Layer 3 mode.
NOTE
l
If
LAN Port two three-port enable
is
disable
, the LAN port works in the Layer 2
mode.
l
If
LAN Port two three-port enable
is
enable
, the LAN port works in the Layer 3
mode.
LAN Port two three-port enable
is defaulted to
disable
.
By default, the system has one
LAN Ethernet Configuration 1
node. To add multiple
nodes, select
LAN Interface
, right-click, and choose
Add
from the shortcut menu.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125
Page 134 / 364
e.
Configure parameters of a WAN port.
a.
In the navigation tree, choose
WAN Device
>
WAN Device 1
>
WAN
Connection
. Select
WAN Connection
, right-click, and choose
Add IP
Connection
from the shortcut menu.
b.
Select
WAN IP Interface 1
and enter (or select) a proper value.
–
WAN Interface Name: ONT-IPTV
–
WAN Enable: enable
–
Connection Type: IP_Bridged
–
VLAN ID: 30 (The VLAN ID of the ONT must be the same as the user-
side VLAN ID configured on the OLT.)
–
Priority: 4
–
MultiCast VLAN ID: 1000 (The multicast VLAN ID of the ONT must
be the same as the multicast VLAN ID configured on the OLT.)
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
126
Page 135 / 364
f.
Configure multicast parameters.
a.
In the navigation tree, choose
Services
>
IGMP
. Select
IGMP
and enter
proper values.
–
WAN Port IGMP Switch: Enable
–
Proxy Switch: Disable
–
Snooping Switch: Enable
NOTE
The ONT multicast modes (IGMP proxy and IGMP snooping) conflict. Only one mode is
supported at a time.
g.
Configure a routing policy.
a.
In the navigation tree, choose
Layer 3 Forwarding
>
Policy Route
. Select
Policy Route
, right-click, and choose
Add
from the shortcut menu.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
127
19216811.live