1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. EchoLife-HG8247
    5. /
  5. 24
Page 116 / 364 Scroll up to view Page 111 - 115
e.
Click
Done
.
6.
Configure a program profile on the OLT side.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
IGMP Profile
from the navigation tree.
b.
Click the
Program Profile
tab, and select the required device type from the
Device Type
drop-down list.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Name: program1
–
Start IP Address: 224.0.1.1 (IP address of the multicast program)
–
End IP Address: 224.0.1.1
–
Source IP Address: 10.10.10.20 (IP address of the multicast server)
–
Preview Profile: 0 (the default value)
e.
Click
OK
.
f.
In the information list, right-click the record and choose
Download to NE
from
the shortcut menu.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
Page 117 / 364
g.
In the dialog box that is displayed, select the required OLT and click
Next
. Then,
set
VLAN ID
to
1000
.
h.
Click
OK
.
7.
Configure a multicast user on the OLT side.
To enable user authentication, select
Enable Authorization
. To add a rights profile
and apply it to NEs, choose
Configuration
>
Access Profile Management
>
IGMP
Profile
from the main menu and click the
Right Profile
tab.
a.
Choose
Multicast
>
Multicast User
from the navigation tree.
b.
In the information list, right-click and choose
Add
from the shortcut menu.
c.
In the dialog box that is displayed, set the parameters.
–
Alias: IGMPUserA
–
Unlimited Band Width: selected
–
Select Service Port: service virtual port named
IGMP
d.
Click
Finish
.
e.
Select the multicast user, click the
User Multicast VLAN
tab in the lower pane,
right-click, and then choose
Add
from the shortcut menu.
f.
In the dialog box that is displayed, select the record where
Multicast VLAN
ID
is set to
1000
and click
OK
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109
Page 118 / 364
----End
Result
The user can watch program1 on TV.
3.2.7 Configuring GPON FTTH Layer 3 Bridge Multicast Service on
the NMS
This topic describes how to configure the multicast service when an ONT is connected to an
OLT through a GPON port.
Prerequisite
The OLT must be added to the U2000.
Example Network
l
The ONT is connected to the OLT in Layer 3 bridge mode.
l
The OLT uses IGMP proxy, which is a Layer 2 multicast protocol.
l
The IGMP version of the multicast VLAN is IGMPv3.
l
Multicast programs are configured statically.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
110
Page 119 / 364
Figure 3-6
Configuring the GPON FTTH multicast service
Multicast Source
OLT
LAN Switch
Optical splitter
U2000
STB
TV
BRAS
ONT
Procedure
l
Add the ONT to the U2000 in profile mode.
1.
Configure an MEF IP traffic profile.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
Traffic Profile
from the navigation tree.
b.
Click the
MEF IP Traffic Profile
tab.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Name: FTTx
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
111
Page 120 / 364
–
CIR: 20480
–
Outer Priority: 1
e.
Click
OK
.
f.
In the information list, right-click the record and choose
Download to NE
from
the shortcut menu.
g.
In the dialog box that is displayed, select the required NE(s), and click
OK
.
2.
Configure a DBA profile.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
PON Profile
>
GPON Profile
from the
navigation tree.
b.
Click the
DBA Profile
tab.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Name: FTTx
–
T-CONT type: Maximum Bandwidth
–
Maximum Bandwidth: 32768
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
112

Rate

3.5 / 5 based on 2 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top