Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 96 / 364 Scroll up to view Page 91 - 95

2.

Add a service virtual port on the OLT side.

a.

On the

VLAN

tab page, select the record where

VLAN ID

is set to

200

and click

the

ServicePort

tab in the lower pane.

b.

In the information list, right-click and choose

Add

from the shortcut menu.

c.

In the dialog box that is displayed, set the parameters.

–

Name: VOIP

–

VlAN Choice: Smart VLAN

–

Connection Type: LAN-GPON (when the physical port is a GPON port) or

LAN-EPON (when the physical port is an EPON port)

–

Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or

0/2/1/0 (when the connection type is LAN-EPON)

–

Vlan ID: 200 (SVLAN ID)

–

Service Type: Multi-Service VLAN

–

User VLAN: 20 (CVLAN ID)

–

Keep the upstream and downstream settings the same: selected

–

Upstream Traffic Name: FTTx

d.

Click

OK

.

3.

Configure the value-added service profile of the ONT.

a.

From the main menu, choose

Configuration

>

Access Profile Management

. In

the navigation tree of the tab page that is displayed, choose

PON Profile

>

ONT

VAS Profile

.

b.

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

c.

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-VoIP

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

88

Page 97 / 364

–

Vendor ID: HWTC(2011)

–

Terminal Type: 247

–

Version: V1R002C06-Later

d.

Configure the parameters of the voice WAN port.

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add IP

Connection

from the shortcut menu.

b.

Select

WAN IP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-VoIP

–

WAN Enable: enable

–

Connection Type: IP_Routed

–

VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 6

–

Addressing Type: DHCP

–

Service List: VOIP (For configuring the VoIP service, VoIP or a

combination containing VoIP needs to be selected.)

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

89

Page 98 / 364

e.

Configure voice protocol parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

. Select

Interface 1

and select a proper

value.

–

Signaling Protocol: SIP

–

Region: China

–

Associate WAN Interface: WAN1(ONT-VoIP) (binding the created voice

WAN port)

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

90

Page 99 / 364

NOTE

If the upper-layer network requires isolation of media streams from signaling streams, create

different traffic streams for the media streams and signaling streams on the OLT, create a

WAN port named

WAN-RTP

on the ONT, and set this WAN port to a media WAN port.

Specifically, choose

Interface 1

>

RTP

and set

Associate WAN Interface

to

WAN2(WAN-

RTP)

.

f.

Configure SIP protocol parameters.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service 1

>

Interface configuration

>

Interface 1

>

SIP

. Select

SIP

and enter (or select) a

proper value.

–

Proxy Server: 200.200.200.200

–

Home Domain: softx3000.huawei.com

NOTE

If dual-homing is configured,

Secondary Proxy Server

must be set.

g.

Configure the voice users.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

91

Page 100 / 364

a.

In the navigation tree, choose

Services

>

Voice Service

>

Voice Service

1

>

Interface configuration

>

Interface 1

>

User

. Select

User

, right-click,

and choose

Add

from the shortcut menu.

NOTE

l

The HG8010 does not support voice services.

l

The HG8110 supports one user.

l

The HG8240/HG8245/HG8247 supports a maximum of two users.

b.

Click

User 1

below

User

and set

Interface ID

to

1

. Click

User 2

below

User

and set

Interface ID

to

2

.

NOTE

If

Interface ID

is

1

, port TEL1 on the ONT is bound. If

Interface ID

is

2

, port TEL2

on the ONT is bound.

h.

Click

OK

to complete the configuration of the new profile.

4.

Bind the value-added service profile.

a.

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

b.

In the navigation tree, choose

GPON

>

GPON Management

.

c.

In the window on the right, choose

GPON ONU

.

d.

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

e.

Select an ONT from the list, right-click, and choose

Bind VAS Profile

from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and

click

OK

to complete profile binding.

5.

Configure ONT value-added services.

a.

On the

GPON ONU

tab page, select an ONT, right-click, and choose

Configure

Value-Added Service

from the shortcut menu.

b.

Configure parameters of the SIP-based voice users.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

92

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share