Huawei EchoLife-HG556a-v2 Router Manual PDF (Setup & Configuration Guide)

Page 31 / 59 Scroll up to view Page 26 - 30

4 Configuring the WAN Interface

Huawei Proprietary and Confidential

4-9

Step 4

Click

Network Address Translation Settings

page, just keep the

default settings. Make sure choose

Data

in the

Service Name

drop-down list box.

Step 5

Click

WAN Setup-Summary

page, click

Save

to save the settings.

Click

Back

to make any modifications. Reboot the terminal so that the settings take effect.

----End

4.1.5 Configuring the Bridge Mode

To configure the Bridge mode for the WAN interface, do as follows:

Step 1

Repeat from the step1 to the step 7 of 4.1.1 "Configuring the PPPoA Mode."

Step 2

On the

Connection Type

page, select

bridge

. Keep other settings by the Internet Service

Provider.

Step 3

Click

Unselect the check box below to disable this WAN service

page, keep the default settings. Make sure choose

Data

in the

Service Name

drop-down

list box.

Step 4

Click

WAN Setup-Summary

page, click

Save

to save the settings.

Click

Back

to make any modifications. Reboot the terminal so that the settings take effect.

----End

Page 32 / 59

4 Configuring the WAN Interface

4-10

Huawei Proprietary and Confidential

4.2 Selecting HSPA uplink mode

To configure the WAN parameters by HSPA uplink mode, do as follows:

Step 1

Logging in to the Web-based configuration utility. For details, see section 3.3 "Logging

In to the Web-Based Configuration Utility."

Step 2

Choose

Advanced Setup

>

WAN

in the navigation tree.

Step 3

Select

USB Uplink

. If you choose the USB uplink, insert the USB stick firstly. More

details, see section 3.2 "Inserting the USB Stick."

Step 4

Click

Hsdpa Profile Settings

page,

just keep the default settings on

the page.

Step 5

Click

Step 6

Click

Save

to save the settings, click

Save/Reboot

to save the settings and reboot the

terminal to make the new configuration effective.

----End

If the SIM card of your USB stick set the PIN code, you have to verify the pin code:

Step 1

Choose

Advanced Setup

>

Pin Code

in the navigation tree.

Step 2

Enter the pin code of the USB stick in the

Pin Code

text box.

Step 3

Click

Check

. After verifying the pin code, you can access the Internet.

----End

Page 33 / 59

5 Configuration of WLAN

Huawei Proprietary and Confidential

5-1

5

Configuration of WLAN

5.1 Setting Up a Wireless Connection by the Wi-Fi

Butto

Step 1

button on the side panel and hold it for more than four seconds to enter

the WPS negotiation state. The Wi-Fi indicator starts to blink slowly in a few seconds.

n

The terminal supports the WPS function. If your network adapter also supports the WPS

function, you can use the WPS function to set up a wireless connection between your PC

and the terminal quickly. To set up a wireless connection, do as follows:

Press the Wi-Fi

y default, the Wi-Fi function of the terminal is enabled

z

B

. Press the Wi-Fi button on the side

z

I

ink, it indicates that the WPS function cannot be enabled.

of the WLAN is set

Step 2

nable the WPS negotiation

Step 3

a few seconds, and then you can see the wireless icon on the corner to the right

k bar of the PC.

----End

5.2 Se

lly. To manually set up a wireless

z

panel and hold it for less than four seconds to disable the Wi-Fi function, and hold it for

more than four seconds to enable the WPS function.

f the Wi-Fi indicator does not bl

Note that the WPS function can be used only when the security mode

to WPA-PSK or WPA2-PSK.

Access the WLAN through the wireless network adapter on your PC.

After you install a wireless network adapter on your PC and e

function, the wireless network adapter automatically searches for an available wireless

network and connect to the wireless network automatically.

Wait for

of the tas

tting Up a Wireless Connection Manually

If your network adapter does not support the WPS function, you can set up a wireless

connection between your PC and the terminal manua

connection, use either of the following methods:

z

Use the tool provided by your network adapter.

For details, see the user guide of your network adapter.

Use the wireless configuration software provided by the operating system of your

PC.

Page 34 / 59

5 Configuration of WLAN

5-2

Huawei Proprietary and Confidential

s

tion between your PC and the

on takes Windows XP as an example and describes how to set up a wireless

between your PC and the terminal manually, do as

follo

Step 1

Reco

If your PC runs on Windows XP, you can use the wireless zero configuration that i

provided by Windows XP to set up a wireless connec

terminal.

This secti

connection between your PC and the terminal manually.

To set up a wireless connection

ws:

rd the WLAN name and the WLAN access password.

The WLAN name (

SSID

) and WLAN access password of the terminal are preset before

delivery. You can find them from the label on the rear panel of the terminal.

ble the wireless configuration service provid

Step 2

Ena

ed by Windows XP.

1.

2.

Applications

>

Services

.

3.

Properties

from the

4.

reless Zero Configuration Properties (Local Computer)

dialog box,

5.

Step 3

Con

1.

ommunications

>

Network

2.

ork Connections

window, right-click

Wireless Network Connection

,

3.

ection Properties

dialog box, select

Wireless

4.

5.

6.

ave recorded from the WLAN list, and then click

have

ct

.

Aft

the upper right corner of

the

between you PC and the terminal.

8.

Close the

Wireless Network Connection

dialog box.

9.

In the

Wireless Network Connection Properties

dialog box, click

OK

.

Right-click

My Computer

, and then choose

Manage

from the shortcut menu.

In the

Computer Management

window, choose

Computer Management (Local)

>

Services and

From the services listed in the right pane of the

Computer Management

window,

right-click

Wireless Zero Configuration

, and then choose

shortcut menu.

In the

Wi

check whether

Service status

is

Started

. If not, click

Start

.

Click

OK

to close the dialog box, and then close the

Computer Management

window.

figure the wireless network connection on your computer.

Choose

Start

>

All Programs

>

Accessories

>

C

Connections

.

In the

Netw

and then choose

Properties

from the shortcut menu.

In the

Wireless Network Conn

Networks

.

Select

Use Windows to configure my wireless network settings

.

Click

View Wireless Networks

.

In the

Wireless Network Connection

dialog box, select the WLAN with the same

name as the WLAN name that you h

Connect

in the lower right corner of the dialog box.

7.

In the displayed dialog box, enter the WLAN access password that you

recorded, and then click

Conne

er the password is authenticated, Connected is displayed in

WLAN icon in the WLAN list, indicating that a wireless connection is set up

Page 35 / 59

6 Configuring Frequently Used Functions

Huawei Proprietary and Confidential

6-1

6

Configuring Frequently Used Functions

6.1 Configuring Multiple PCs to Access the Internet

Functio

can

Then

the PCs can access the Internet simultaneously through the routing function of the

Config

t

ternet

Step 1

by using network cables.

Step 2

uring the laptop.

Step 3

he terminal to the Internet.

Step 4

p computers and the laptop so that these

obtain IP addresses automatically.

----End

n Overview

The terminal provides four Ethernet interfaces and the WLAN function. Thus, you

connect multiple PCs to the terminal wirelessly or through the Ethernet interfaces.

terminal.

uration Example

For example, you have two desktop computers and a new laptop with a wireless network

adapter installed. You can configure the desktop computers and the laptop to access the

Internet simultaneously. In this example, the laptop is configured to access the Interne

wirelessly.

Most configurations of the terminal are completed before delivery. You only need to

connect the desktop computers and the laptop to the terminal and set certain In

acc

ss parameters of the terminal as follows:

e

Connect the two desktop computers to the terminal

For

details, see section 3.1 "Connecting Cables."

Connect the laptop to the terminal wirelessly by config

For details, see chapter 5 "Configuration of WLAN."

Set the Internet access parameters of the terminal to connect t

For details, see chapter 4 "Configuring the WAN Interface."

e network connections on the deskto

Configur

PCs can

If the desktop computers and the laptop cannot access the Internet after the preceding

configuration, the Internet Service Provider might have bound your Internet access account to

the Media Access Control (MAC) address of the network adapter of your old desktop

computer. To remove the restriction, consult the Internet Service Provider.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share