4 Configuring the WAN Interface
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-7
4.1.3
Table 4-5
Configuring the MER Mode
To configure the MER mode for the WAN interface, do as follows:
Step 1
Repeat from the step1 to the step 7 of 4.1.1 "Configuring the PPPoA Mode."
Step 2
On the
Connection Type
page, select
MAC Encapsulation Routing (MER)
. Keep
other settings by the Internet Service Provider.
Step 3
Click
Next
to show the
WAN IP Settings
page, you can keep the default settings or set
the parameters refer to Table 4-5.
Parameters for the
WAN IP Settings
page
Parameter
Description
DHCP Class Identifier
It specifies the client.
WAN IP Address
It specifies the WAN IP address of the PVC.
When the method for obtaining an IP address is set to
using a static IP address, the terminal provides this
parameter.
WAN Subnet Mask
It specifies the WAN subnet mask of the PVC.
When the method for obtaining an IP address is set to
using a static IP address, the terminal provides this
parameter.
Primary DNS server
It specifies the IP address of the primary DNS server used
by the PVC.
When the method for obtaining an IP address is set to
using a static IP address, the terminal provides this
parameter.
Secondary DNS server
It specifies the IP address of the secondary DNS server
used by the PVC.
When the method for obtaining an IP address is set to
using a static IP address, the terminal provides this
parameter.
IpoE's
MTU:[296-1500]
The maximum length of the transported IP package with
the selected IPoE protocol.
Step 4
Click
Next
to show the
Network Address Translation Settings
page, just keep the
default settings. Make sure choose
Data
in the
Service Name
drop-down list box.
Step 5
Click
Next
to show the
WAN Setup-Summary
page, click
Save
to save the settings.
Click
Back
to make any modifications. Reboot the terminal so that the settings take effect.
----End
19216811.live