Page 31 / 50
Scroll up to view Page 26 - 30
LTE CPE Online Help
6 Security
2012-09-22
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
6.2.2 MAC Address Blacklist
Choose Security > MAC Filtering. Set MAC filtering mode to Blacklist.
The other operations are the same as those of the MAC address whitelist.
6.3 URL Filtering
This page allows you to configure the URL filtering rules.
6.3.1 URL Whitelist
To add a URL whitelist rule:
1.
Choose
Security
>
URL Filtering
.
The
URL Filtering
page is displayed.
2.
Set
URL filtering mode
to
Whitelist
.
3.
Click
Add Item
.
4.
Set
URL
.
5.
Click
Submit
.
----End
To change a URL whitelist rule:
1.
Choose
Security
>
URL Filtering
.
The
URL Filtering
page is displayed.
2.
Set
URL filtering mode
to
Whitelist
.
3.
Choose the entry you want to change and click
Edit
.
4.
On the displayed page, set
URL
.
5.
Click
Submit
.
----End
To delete a URL whitelist rule:
1.
Choose
Security
>
URL Filtering
.
The
URL Filtering
page is displayed.
2.
Set
URL filtering mode
to
Whitelist
.
3.
Choose the entry you want to delete and click
Delete
.
4.
From the displayed dialog box, click
OK
.
----End
Page 32 / 50
LTE CPE Online Help
6 Security
2012-09-22
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
To delete all URL whitelist rules:
1.
Choose
Security
>
URL Filtering
.
The
URL Filtering
page is displayed.
2.
Set
URL filtering mode
to
Whitelist
.
3.
Click
Delete All
.
4.
From the displayed dialog box, click
OK
.
----End
6.3.2 URL Blacklist
Choose Security > URL Filtering. Set URL filtering mode to Blacklist.
The other operations are the same as those of the URL whitelist.
6.4 IP Filtering
This page allows you to configure the IP address filtering rules.
6.4.1 IP Address Whitelist
To add an IP address whitelist rule:
1.
Choose
Security
>
IP Filtering
.
The
IP Filtering
page is displayed.
2.
Set
IP filtering mode
to
Whitelist
.
3.
Click
Add Item
.
4.
Set
Service
.
5.
Set
Protocol
.
6.
Set
Source IP address range
, which is the IP address or IP address segment to be filtered.
7.
Set
Source port range
, which is the port or port segment to be filtered.
8.
Set
Destination IP address range
, which is the IP address or IP address segment to be
filtered.
9.
Set
Destination port range
, which is the port number or port number segment to be filtered.
10.
Click
Submit
.
----End
To change an IP whitelist rule:
1.
Choose
Security
>
IP Filtering
.
The
IP Filtering
page is displayed.
Page 33 / 50
LTE CPE Online Help
6 Security
2012-09-22
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
2.
Set
IP filtering mode
to
Whitelist
.
3.
Choose the entry you want to change and click
Edit
.
4.
Make your changes.
5.
Click
Submit
.
----End
To delete an IP address whitelist rule:
1.
Choose
Security
>
IP Filtering
.
The
IP Filtering
page is displayed.
2.
Set
IP filtering mode
to
Whitelist
.
3.
Choose the entry you want to delete and click
Delete
.
4.
From the displayed dialog box, click
OK
.
----End
To delete all IP address whitelist rules:
1.
Choose
Security
>
IP Filtering
.
The
IP Filtering
page is displayed.
2.
Set
IP filtering mode
to
Whitelist
.
3.
Click
Delete All
.
4.
From the displayed dialog box, click
OK
.
----End
6.4.2 IP Address Blacklist
Choose Security > URL Filtering. Set IP filtering mode to Blacklist.
The other operations are the same as those of the IP address whitelist.
6.5 Service Access Control
This function allows you to control the number of users connected to the CPE.
The access control list shows the types of services that are controlled by the CPE. By default,
the access control rules are not in effect.
To set the access control list:
1.
Choose
Security
>
Service Access Control
.
The
Service Access Control
page is displayed.
2.
Choose the entry to be configured, and click
Edit
.
Page 34 / 50
LTE CPE Online Help
6 Security
2012-09-22
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
3.
Set
IP address range
.
If
Access source
is
LAN
, the IP address must be on the same network segment as
the IP address that is set on the
LAN Host Settings
page.
If
Access source
is
Internet
, the IP address must be on different network segments
from the IP address that is set on the
LAN Host Settings
page.
4.
Set
Status
.
5.
Click
Submit
.
----End
6.6 ALG
On this page, you can enable or disable SIP ALG.
To enable SIP ALG:
1.
Choose
Security
>
ALG
.
The
ALG Settings
page is displayed.
2.
Select the
Enable
check box next to
SIP ALG
.
3.
Set
SIP port
.
The default port numbered 5060 is recommended. If the default port is not used,
VoIP software cannot be used.
4.
Click
Submit
.
----End
6.7 Port Forwarding
When network address translation (NAT) is enabled on the CPE, only the IP address on the
WAN side is open to the Internet. If a computer on the LAN is enabled to provide services for
the Internet (for example, work as an FTP server), port forwarding is required so that all
accesses to the external server port from the Internet are redirected to the server on the LAN.
To add a port forwarding rule:
1.
Choose
Security
>
Port Forwarding
.
The
Port Forwarding
page is displayed.
2.
Click
Add Item
.
3.
Set
Type
.
4.
Set
Protocol
.
5.
Set
Remote host
(Optional).
6.
Set
Remote port range
.
Page 35 / 50
LTE CPE Online Help
6 Security
2012-09-22
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
The port number must range from 1 to 65535.
7.
Set
Local host
.
This IP address must be different from the CPE IP address, but it must be on the
network segment set on the
LAN Host Settings
page.
8.
Set
Local port
.
The port number must range from 0 to 65535.
9.
Set
Status
to
Enabled
or
Disabled
.
10.
Click
Submit
.
----End
To change a port forwarding rule:
1.
Choose
Security
>
Port Forwarding
.
The
Port Forwarding
page is displayed.
2.
Choose the entry you want to change and click
Edit
.
3.
Make your changes.
4.
Click
Submit
.
----End
To delete a port forwarding rule:
1.
Choose
Security
>
Port Forwarding
.
The
Port Forwarding
page is displayed.
2.
Choose the entry you want to delete and click
Delete
.
3.
From the displayed dialog box, click
OK
.
----End
To delete all port forwarding rules:
1.
Choose
Security
>
Port Forwarding
.
The
Port Forwarding
page is displayed.
2.
Click
Delete All
.
3.
From the displayed dialog box, click
OK
.
----End
19216811.live