LTE CPE Online Help

3 Internet

2012-09-22

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

16

----End

3.5 Unlocking the USIM Card

Contact your service provider for the USIM unlock code. You can use the CPE after its USIM

card is unlocked.

Note: If the number of unlock attempts exceeds the predefined limit, the USIM card is locked

permanently.

To unlock a USIM card:

1.

Choose

Internet

>

SIM Lock

.

The

SIM Lock

page is displayed.

2.

Enter the unlock code in the

Unlock code

field.

3.

Click

Submit

.

----End

LTE CPE Online Help

4 LAN

2012-09-22

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

17

4

LAN

4.1 DHCP Settings

4.1.1 LAN Host Settings

You can change the host IP address to another individual IP address that is easy to remember.

Make sure the IP address is unique on your network. If you change the IP address of the CPE,

access the web UI with the new IP address.

To change the IP address of the CPE:

1.

Choose

LAN

>

DHCP Settings

.

The

DHCP Settings

page is displayed.

2.

Set

IP address

.

3.

Select the

Enable

check box next to

DHCP server

.

4.

Click

Submit

.

----End

4.1.2 DHCP Settings

DHCP allows individual clients to automatically obtain TCP/IP configurations when a server

starts up.

You can configure the CPE as a DHCP server or disable it when the CPE is working in

routing mode.

When configured as a DHCP server, the CPE automatically provides TCP/IP configuration for

the LAN clients that support DHCP client capabilities. If DHCP server services are disabled,

you must have another DHCP server on your LAN, or each client must be manually

configured.

To configure DHCP settings:

1.

Choose

LAN

>

DHCP Settings

.

The

DHCP Settings

page is displayed.

2.

Select the

Enable

check box next to

DHCP server

.

LTE CPE Online Help

4 LAN

2012-09-22

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

18

3.

Set

Start IP address

.

This IP address must be different from the IP address that is set on the

LAN Host

Settings

page, but both addresses must be on the same network segment.

4.

Set

End

IP address

.

This IP address must be different from the IP address that is set on the

LAN Host

Settings

page, but both addresses must be on the same network segment.

The end IP address must be less than or equal to the start IP address.

5.

Set

Lease time

.

This parameter can be set to 1 to 10,080 minutes.

6.

Click

Submit

.

----End

4.1.3 Bundled Address List

You can bundle an IP address with a device based on its MAC address. The device will

always receive the same IP address each time it accesses the DHCP server. For example, you

can bundle an IP address with an FTP server on the LAN.

After you change the settings, click

Submit

for the changes to take effect.

The DHCP server may need to restart.

To configure or view the bundled list page:

1.

Choose

LAN

>

DHCP Settings

.

2.

Click

Edit List

.

The

Bundled Address

page is displayed.

----End

To add a MAC/IP rule:

1.

Click

Add

.

2.

On the displayed page, set

MAC address

and

IP address

.

3.

Click

Submit

.

----End

To modify a MAC/IP rule:

1.

Choose the rule to be modified, and click

Edit

.

2.

On the displayed page, set

MAC address

and

IP address

.

3.

Click

Submit

.

----End

LTE CPE Online Help

4 LAN

2012-09-22

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

19

To delete a MAC/IP rule:

1.

Choose the rule to be deleted, and click

Delete

.

2.

From the displayed dialog box, click

OK

.

----End

To delete all MAC/IP rules:

1.

Click

Delete All

.

2.

From the displayed dialog box, click

OK

.

----End

To make the changes take effect, click Apply, or click Back and click Submit from

the DHCP Settings screen.

4.2 Static Routing

If cascaded routers are used on the LAN, add static routing rules to ensure that the devices

connected to the cascaded routers can be accessed. Static routing is similar to dynamic routing.

However, manual configuration is required and the router must always be available.

±

If the IP address of the cascaded router is fixed, static routing is recommended.

±

If the IP address of the cascaded router is changeable, dynamic routing is recommended.

To configure static routing settings:

1.

Choose

LAN

>

Static

Routing

.

The

Static Routing

page is displayed.

2.

Click

Add

in the upper right corner of the

Static Routing

page.

3.

Set

Destination IP address

.

4.

Set

Subnet mask

.

5.

Set

Router IP address

. This IP address is obtained from the CPE and used for data

transmission to the cascading devices. This IP address must be reachable.

6.

Click

Submit

.

----End

4.3 Dynamic Routing

This function is enabled when cascaded routers are used on the LAN and the cascaded routers

comply with the Routing Information Protocol (RIP). This page allows you to enable or

disable RIP and set its version and operation mode.

To configure dynamic routing settings:

LTE CPE Online Help

4 LAN

2012-09-22

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

20

1.

Choose

LAN

>

Dynamic

Routing

.

The

Dynamic

Routing

page is displayed.

2.

Select the

Enable

check box next to

RIP

.

3.

Set

Operation

. If it is set to

Active

, the CPE actively makes route changes and notifies

surrounding routers of the changes. If it is set to

Passive

, the CPE does not make route

changes until it is notified.

4.

Set

Version

to

RIP v1

,

RIP v2

, or

RIP v1/RIP v2

.

5.

Click

Submit

.

----End