Page 46 / 77
Scroll up to view Page 41 - 45
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
43
Figure 4-38
Firmware upgrade
This page allows you to update the system software on your network device from an
image file which may be obtained from Huawei support website.
Enter the path to the image file location in the text box or click the
button to locate the image file.
Click the
button to open the selected firmware image file.
Click the
button to update the system software on the ADSL router with the
selected image file.
&
Note:
The upgrade process takes about 2 minutes to complete, and the ADSL router will
reboot.
After the router reboots, restore the configuration to the factory settings at first to make
sure that the current configuration file matches!
Click the
“
Huawei
”
hyperlink to visit the support web site from where the update image
file may be obtained.
4.19 Status
Click
Status
in the Main menu and choose the
Status
tab in the Main Frame to open
the
Status
page.
Page 47 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
44
Figure 4-39
Status page
The
Status
page displays useful information about the setup of the ADSL router,
including:
●
Details of the ADSL router
’
s Internet access settings
●
Some important system information (hardware information, version information)
●
Routing table
●
Current DSL state and Ethernet connection information
●
WAN Status
●
LAN Status
●
All interfaces
’
status
This page allows you to:
Page 48 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
45
●
View the current status of the ADSL router.
●
Configure the port connection (DSL, Ethernet).
To configure the DSL port connection, click the
label in
Port Connection Status
region to open the web page
DSL
.
Figure 4-40
DSL port configuration
The
DSL
page displays basic attribute information about the DSL port configuration.
To configure the basic attributes of DSL port, enter the proper values of attributes, then
click the
button.
To configure the Ethernet port and USB port, follow the same step above.
4.20 Log
Click
Status
in the Main menu and choose the
Log
tab in the Main Frame to open the
Event log
page.
This page allows you to:
●
Clear the event entries according to the selected event type.
●
View the activity on the ADSL router since power-on according to the selected
event type.
Page 49 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
46
Figure 4-41
Log
The event type drop-down list contains entries defined as below. To select the proper
event type, position the cursor over the entry and left-click to select it, and then click the
button.
Click the
button to clear the selected event entries.
4.21 PVC Scan
Click
Status
in the Main menu and choose the
Search Service
tab in the Main Frame
to open the PVC scan page.
Figure 4-42
Search service
Page 50 / 77
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router
4 Web-based Management
47
This page can be used to search for PVC settings not used currently. If the ISP has
configured these PVCs, the device will automatically add the information about these
PVCs into the WAN service list on the WAN setting page after the search. For PPPoE
or PPPoA service, it is also necessary for the users to edit the automatically added
services and to enter the username and password. The search takes over 5 minutes.
4.22 Save Configure
Click
Save Configure
in the Main menu to open the
Save configuration
page.
Figure 4-43
Save configuration
Click the
button to write the current configuration to the flash memory.
&
Note:
You must save your new settings for them to take effect the next time the device is
powered on.
There will be a delay while configuration information is written to the flash memory.
19216811.live