Page 41 / 136
Scroll up to view Page 36 - 40
32
If the current and new passwords are correctly entered, after you click
‘Apply’, you’ll be prompted to input your new password:
Please use new password to enter web management interface again, and
you should be able to login with new password.
2-4-3 Remote Management
This router does not allow management access from Internet, to prevent
possible security risks (especially when you defined a weak password, or
didn’t change default password). However, you can still manage this
router from a specific IP address by enabling the ‘Remote Management’
Function.
Please click ‘Admin’ tab at top of web management interface, then click
‘Remote Management’, and the following message will be displayed on
your web browser:
1
2
3
Page 42 / 136
33
Here are descriptions of every setup item:
Host Address (1):
Input the IP address of the remote host you wish to initiate a
management access.
Port (2):
You can define the port number this router should expect an
incoming request. If you’re providing a web service (default
port number is 80), you should try to use other port number.
You can use the default port setting ‘8080’, or something like
‘32245’ or ‘1429’. (Any integer between 1 and 65534)
Enabled (3):
Select the field to start the configuration.
When you finish with all settings, click ‘Apply’, and you’ll see the
following message displayed on web browser:
Press ‘Continue’ to save the settings made and go back to web
management interface; press ‘Apply’ to save the settings made and restart
the router so the settings will take effect after it reboots.
Page 43 / 136
34
NOTE: When you want to manage this router from another computer
over the internet, you have to input the IP address and port number of
this router. If your Internet service provider assigns you with a static
IP address, it will not be a problem; but if the IP address your service
provider assigns to you will vary every time you establish an internet
connection, this will be a problem.
Please either ask your service provider to give you a static IP
address, or use dynamic IP to host name mapping services like
DDNS. Please refer to chapter 2-5-8 ‘DDNS client’ for details.
NOTE: Default port number the web browser will use is ‘80’. If the
‘Port’ setting in this page is not ‘80’, you have to assign the port
number in the address bar of web browser manually. For example, if
the IP address of this router is 1.2.3.4, and the port number you set is
8888, you have to input following address in the address bar of web
browser:
Page 44 / 136
35
2-5
Setup Internet Connection (Setup)
Internet connection setup can be done by using ‘Quick Setup’ menu
described in chapter 2-3.
To start configuration, please follow the instructions:
Please click ‘Setup’ tab at the top of the web management interface, and
complete the time settings and click ‘Next’. The following message will
be displayed on your web browser:
Please select an Internet connection method depending on the type of
connection you’re using.
Dynamic IP
- Please go to section 2-5-1
Static IP
- Please go to section 2-5-2
PPPoE
- Please go to section 2-5-3
PPTP
- Please go to section 2-5-4
DNS
- Please go to section 2-5-5
DDNS
- Please go to section 2-5-6
Page 45 / 136
36
2-5-1 Setup procedure for ‘Dynamic IP’:
Here are descriptions of every setup items:
Host Name (1):
Please input host name of your computer, this is optional,
and only required if your service provider asks you to do so.
MAC Address (2):
Please input MAC address of your computer, if your service
provider only permits computer with certain MAC address to
access internet. If you’re using the computer which used to
connect to Internet via cable modem, you can simply press
‘Clone Mac address’ button to fill the MAC address field
with the MAC address of your computer,
After you finish with all settings, please click ‘OK’ (3); if you want to
remove a value you entered, please click ‘Back’.
After you click ‘OK’, the following message will be displayed on your
web browser:
1
2
3
19216811.live