Page 36 / 136
Scroll up to view Page 31 - 35
27
Now please go to PPTP settings section:
Here are descriptions of every setup item:
User ID (1):
Please input user ID (user name) assigned by your Internet
service provider here.
Password (2):
Please input the password assigned by your Internet service
provider here.
PPTP
Please input the IP address of PPTP gateway assigned by
Gateway (3):
your Internet service provider here.
Connection
Please input the connection ID here, this is optional and you
ID (4):
can leave it blank.
MTU (5):
Please input the MTU value of your network connection here.
If you don’t know, you can use default value.
Connection
Please select the connection type of Internet connection you
type (6):
wish to use, please refer to last section for detailed descriptions.
Idle Time
Please input the idle time out of Internet connection you wish
Out (7):
to use, and refer to last section for detailed descriptions
.
1
2
3
4
5
6
7
8
Page 37 / 136
28
Setting item ‘BEZEQ-ISRAEL’ is only required to check if you’re using
the service provided by BEZEQ network in Israel.
When you finish with all settings, please click ‘OK (8); if you want to go
back to previous menu, click ‘Back’.
Page 38 / 136
29
2-4 Basic Setup
In this chapter, you’ll know how to change the time zone, password, and
remote management settings. Please start your web browser and log onto
router web management interface, then click ‘Admin’ tab.
2-4-1 Time zone and time auto-synchronization
Please follow the following instructions to set time zone and time
auto-synchronization parameters:
Please click ‘Admin’ tab in menu on the top of web management
interface, and time zone settings will be displayed on your web browser:
Please select the correct time zone from the drop-down list, and input the
IP address or host name of time server. If you want to enable daylight
savings setting, please check ‘Enable Function’ box, and set the duration
of daylight setting. When you finish, click ‘Apply’. You’ll see the
following message displayed on web browser:
Page 39 / 136
30
Press ‘Continue’ to save the settings made and go back to the web
management interface; press ‘Apply’ to save the settings made and restart
the router so the settings will take effect after it reboots.
2-4-2 Change management password
Default password of this router is 1234, and it’s displayed on the login
prompt when accessed from web browser. There’s a security risk if you
don’t change the default password, since everyone can see it. This is very
important when you have wireless function enabled.
To change password, please follow the instructions:
Please click ‘Admin’ tab at top of web management interface, then click
‘Password Settings’, and the following message will be displayed on your
web browser:
NOTE: You can refer to the instructions given in the last chapter:
‘Using Quick Setup’, for detailed descriptions on time zone settings.
1
2
3
Page 40 / 136
31
Here are descriptions of every setup item:
Current
Please input current password here.
Password (1):
New Password (2):
Please input new password here.
Confirmed
Please input new password here again.
Password (3):
When you finish, click ‘Apply’. If you want to keep original password
unchanged, click ‘Cancel’.
If the password you typed in ‘New Password’ (2) and ‘Confirmed
Password’ (3) field are not the same, you’ll see the following message:
Please retype the new password again when you see above message.
If you see the following message:
It means the content in ‘Current Password’ field is wrong, please click
‘OK’ to go back to previous menu, and try to input current password
again.
19216811.live