Hawking HWRN2 Router Manual PDF (Setup & Configuration Guide)

Page 46 / 136 Scroll up to view Page 41 - 45

37

Please click ‘Continue’ (1) to go back to previous setup menu; to continue

on router setup, or click ‘Apply’ to reboot the router so the settings will

take effect (Please wait for about 30 seconds while router is rebooting).

2-5-2 Setup procedure for ‘Static IP’:

Here are descriptions of every setup items:

IP address assigned

Please input IP address assigned

by your Service

by your service provider.

Provider (1):

Subnet Mask (2):

Please input subnet mask assigned by your service provider

DNS address (3):

Please input the IP address of DNS server

provided by your service provider.

Service Provider

Please input the IP address of DNS

Gateway Address (4):

server provided by your service provider.

After you finish with all settings, please click ‘Apply’ (5) button and the

following message will be displayed on your web browser:

1

2

3

4

5

Page 47 / 136

38

Please click ‘Continue’ to go back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

2

-5-3 Setup procedure for ‘PPPoE’:

User Name (1):

Please input user name assigned by your Internet service

provider here.

Password (2):

Please input the password assigned by your Internet service provider here.

1

2

4

3

5

6

7

Page 48 / 136

39

Service Name (3):

Please give a name to this Internet service, this is optional

MTU (4):

Please input the MTU value of your network connection here.

If you don’t know, you can use default value.

Connection

Please select the connection type of Internet

Type (5):

connection you wish to use.

Continuous – The connection will be kept always on. If the

connection is interrupted, the router will re-connect

automatically.

Connect On-Demand – Only connect when you want to surf the

Internet. “Idle Time Out” is set to stop the connection when the

network traffic is not sending or receiving after an idle time.

Manual – After you have selected this option, you will see the

“Connect” button and “Disconnect” button, click “’Connect”

and the router will connect to the ISP. If you want to stop the

connection, please click “Disconnect” button.

Idle Time Out (6):

If you have selected the connection type to

“Connect-On-Demand”, please input the idle time out.

After you finish with all settings, please click ‘Apply’ (7) button and the

following message will be displayed on your web browser:

Please click ‘Continue’ to go back to previous setup menu; to continue on

other setup procedures, or click ‘Apply’ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

Page 49 / 136

40

If you want to reset all settings in this page back to previously-saved

value, please click ‘Cancel’ button.

2-5-4 Setup procedure for ‘PPTP’:

PPTP requires two kinds of setting: WAN interface setting (setup IP

address) and PPTP setting (PPTP user name and password). Here we start

from WAN interface setting:

Select the type of how you obtain IP address from your service provider

here. You can choose ‘Obtain an IP Address automatically’ (equal to

DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the

following IP address’ (i.e. static IP address)

WAN interface settings must be correctly set, or the Internet connection

will fail even if settings of PPTP settings are correct. Please contact your

Internet service provider if you don’t know what you should fill in these

fields.

Page 50 / 136

41

Now please go to PPTP settings section:

Here are descriptions of every setup items:

User ID (1):

Please input user ID (user name) assigned by your Internet

service provider here.

Password (2):

Please input the password assigned by your Internet service

provider here.

PPTP Gateway (3):

Please input the IP address of PPTP gateway assigned by

your Internet service provider here.

Connection ID (4):

Please input the connection ID here, this is optional and you

can leave it blank.

MTU (5):

Please input the MTU value of your network connection here.

If you don’t know, you can use default value.

BEZEQ-ISRAEL (6):

If you are connecting to the BEZEQ network in Israel.

Please enable this function.

Connection

Please select the connection type of Internet

1

2

3

4

5

7

8

9

6

Rate

Popular Hawking Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share