Page 31 / 136
Scroll up to view Page 26 - 30
22
2-3-1 Setup procedure for ‘Cable Modem’:
2-3-1 Setup procedure for ‘Dynamic IP (Cable Modem)’:
Here are descriptions of every setup items:
Host Name (1):
Please input the host name of your computer, this is
optional, and only required if your service provider
asks you to do so.
MAC address (2):
Please input MAC address of your computer here, if your
service provider only permits computer with certain MAC
address to access internet. If you’re using the computer
which used to connect to Internet via cable modem, you can
simply press ‘Clone Mac address’ button to fill the MAC
address field with the MAC address of your computer.
After you finish with all settings, please click ‘OK’ (3) button; if you
want to go back to previous menu, click ‘Back’.
1
2
3
Page 32 / 136
23
2-3-2 Setup procedure for ‘Fixed-IP (DSL modem)’:
Here are descriptions of every setup items:
IP address assigned
Please input IP address assigned
by your Service
by your service provider.
Provider (1):
Subnet Mask (2):
Please input subnet mask assigned by your service provider
DNS address (3):
Please input the IP address of DNS server provided by your
service provider.
Service Provider
Please input the IP address of DNS server
Gateway Address (4):
provided by your service provider.
When you finish with all settings, press ‘OK’ (5); if you want to go back
to previous menu, click ‘Back’.
2
5
You must use the addresses provided by your Internet service
provider, wrong value settings will cause connection problems.
1
3
4
Page 33 / 136
24
Here are descriptions of every setup items:
User Name (1):
Please input user name assigned by your Internet service
provider here.
Password (2):
Please input the password assigned by your Internet service
provider here.
Service Name (3):
Please give a name to this Internet service, this is optional
MTU (4):
Please input the MTU value of your network connection here.
If you don’t know, you can use default value.
NOTE: You can choose this Internet connection method if your
service provider assigns a fixed IP address (also known as a static
address) to you, and not using DHCP or PPPoE protocol. Please
contact your service provider for further information.
1
2
4
3
5
6
7
Page 34 / 136
25
Connection
Please select the connection type of Internet
Type (5):
connection you wish to use (detailed explanation listed
below).
Idle Time Out (6):
Please input idle time out, (detailed explanation listed
below).
When you finish with all settings, please click ‘OK’ (7); if you want to go
back to previous menu, click ‘Back’.
MTU - Please use default value if you don’t know what it is, or ask
your service provider for a proper value.
Connection Type - There are 3 options: ‘Continuous’ - keep internet
connection alive, do not disconnect, connect on Demand - only
connects to Internet when there’s a connect attempt, and ‘Manual’ -
only connects to Internet when ‘Connect’ button on this page is
pressed, and disconnects when ‘Disconnect button is pressed.
Idle Time Out: Specify the time to shutdown internet connect after no
internet activity is detected by minute. This option is only available
when connection type is ‘Connect on Demand’.
Page 35 / 136
26
2-3-4 Setup procedure for ‘PPTP xDSL’:
PPTP xDSL requires two kinds of setting: WAN interface setting (setup
IP address) and PPTP setting (PPTP user name and password). Here we
start from WAN interface setting:
Select how you obtain IP address from your service provider here. You
can choose ‘Obtain an IP address automatically’ (equal to DHCP, please
refer to ‘Cable Modem’ section above), or ‘Use the following IP address’
(i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection
will fail even if those settings of PPTP settings are correct. Please contact
your Internet service provider if you don’t know what you should fill in
these fields.
19216811.live