Page 121 / 138
Scroll up to view Page 116 - 120
112
Here are descriptions of every setup items:
Enable DMZ (1):
Check this box to enable DMZ function, uncheck
this box to disable DMZ function.
Public IP
You can select ‘Dynamic IP’ or ‘Static IP’ here.
address (2):
If you select ‘Dynamic IP’, you have to select an
Internet connection session from dropdown menu; if
you select ‘Static IP’, please input the IP address
that you want to map to a specific private IP
address.
Client PC IP
Please input the private IP address that the
address (3):
Internet IP address will be mapped to.
Computer Name (4): Pull down the menu and all the computers
connected to the router will be listed here. You can
easily to select the computer name without checking
the IP address of the computer.
Add (5):
Click ‘Add’ button to add the public IP address and
associated private IP address to the DMZ table.
Reset (6):
Click ‘Clear’ to remove the value you inputted in
Public IP address and Client PC IP address field.
1
2
4
5
6
7
8
9
10
11
3
Page 122 / 138
113
Current
All existing public IP address and private IP
DMZ table (7):
address mapping will be displayed here.
Delete
If you want to delete a specific DMZ entry, check
Selected (8):
the ‘select’ box of the DMZ entry you want to delete,
then click ‘Delete Selected’ button. (You can select
more than one DMZ entries).
Delete All (9):
If you want to delete all DMZ entries listed here,
please click ‘Delete All’ button.
Reset (10):
You can also click ‘Reset’ button to unselect all
DMZ entries.
After you finish with all settings, please click ‘Apply’ (11) button and the
following message will be displayed on your web browser:
Please click ‘Continue’ to go back to previous setup menu; to continue on
other setup procedures, or click ‘Apply’ to reboot the router so the
settings will take effect (Please wait for about 30 seconds while router is
rebooting).
If you want to reset all settings in this page back to previously-saved
value, please click ‘Cancel’ button.
Page 123 / 138
114
3-4 System Status
The functions described here will provide you with system related
information. To enter system status menu, please either click ‘Status’ link
located at the upper-right corner of web management interface, or click
‘Status’ button in main menu.
3-4-1 System information and firmware version
You can use this function to know the system information and firmware
version of this router.
Please click ‘Status’ link located at the upper-right corner of web
management interface, and the following message will be displayed on
your web browser
NOTE: Information displayed here may vary.
Page 124 / 138
115
3-4-2 Internet Connection Status
You can use this function to know the status of current Internet
connection.
Please click ‘Status’ menu at the top of web management interface, and
the following message will be displayed on your web browser:
This information will vary depending on the connection status.
3-4-3 Device Status
You can use this function to know the status of your router.
Please click ‘Device Status’ tab at top of web management interface, and
the following message will be displayed on your web browser:
Page 125 / 138
116
This information will vary depending on the device status.
3-4-4 System Log
All important system events are logged. You can use this function to
check the event log of your router.
Please click ‘System Log’ tab at the top of web management interface,
and the following will be displayed on your web browser:
1
2
3
19216811.live